OpAmpJtagTest sz72
opampjtagtest / Plots / opamp (PCB - PLOT REPORT).txt
PLOT REPORT
-----------
Report File : D:\Users\Public\Documents\DesignSpark PCB\opamp (PCB - PLOT REPORT).txt
Report Written : Friday, September 06, 2013
Project Path : D:\Users\Public\Documents\DesignSpark PCB\opamp.prj
Design Path : D:\Users\Public\Documents\DesignSpark PCB\opamp.pcb
Design Title :
Created : 18/04/2013 21:36:28
Last Saved : 06/09/2013 06:27:43
Editing Time : 5416 min
Units : mm (precision 2)
Device Settings
===============
Gerber Settings
===============
Leading zero suppression.
G01 assumed throughout.
Line termination <*> <CR> <LF>.
2.3 format absolute inches.
Format commands defined in Gerber file.
Aperture table defined in Gerber file.
Hardware arcs allowed.
Drill Settings
==============
Excellon Format 1 Format 2.3 absolute in mm.
No zero suppression.
Plots Output
============
Plot Job: "D:\Users\Public\Documents\DesignSpark PCB\opamp.mop"
Gerber Output
=============
D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Top Copper.gbr
Layers:
------------
Top Copper
D-Code Shape (thou)
--------------------------------------------
D15 Round 60.00
D16 Round 48.00
D17 Round 7.87
D18 Square 60.00
D19 Rectangle 70.87 X 86.61 Rotation 90
D70 Rectangle 11.81 X 51.18 Rotation 90
D71 Round 80.00
D20 Round 10.00
D21 Round 15.00
D22 Round 50.00
Gerber Output
=============
D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Documentation.gbr
Layers:
----------------
Board Outlines
D-Code Shape (thou)
---------------------
D10 Round 5.91
Gerber Output
=============
D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Bottom Copper.gbr
Layers:
---------------
Bottom Copper
D-Code Shape (thou)
---------------------
D10 Round 5.91
D15 Round 60.00
D16 Round 48.00
D17 Round 7.87
D18 Square 60.00
D71 Round 80.00
D20 Round 10.00
D21 Round 15.00
D22 Round 50.00
NC Drill Output
===============
D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Drill Data - Through Hole.drl
Output:
--------------------------
Plated Round Drill Holes
Plated Slots
Plated Board Outlines
Tool Size Count ID
-----------------------------
T001 00.024 in 19 B
T002 00.032 in 92 C
T003 00.035 in 180 A
T004 00.040 in 176 D
T005 00.050 in 6 E
-----------------------------
Total 473
-----------------------------
Tool Size Count ID
-----------------------------
T001 00.025 in 1
-----------------------------
Total 1
-----------------------------
Gerber Output
=============
D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Drill Ident Drawing - Through Hole.gbr
Layers:
----------------
[Through Hole]
Drill Ident Drawing
===================
Drill Plated Size Shape ID
------------------------------
35 Y 100 Round A
24 Y 100 Round B
32 Y 100 Round C
40 Y 100 Round D
50 Y 100 Round E
D-Code Shape (thou)
---------------------
D11 Round 5.00
D23 Round 100.00
End Of Report.