PLOT REPORT ----------- Report File : D:\Users\Public\Documents\DesignSpark PCB\opamp (PCB - PLOT REPORT).txt Report Written : Friday, September 06, 2013 Project Path : D:\Users\Public\Documents\DesignSpark PCB\opamp.prj Design Path : D:\Users\Public\Documents\DesignSpark PCB\opamp.pcb Design Title : Created : 18/04/2013 21:36:28 Last Saved : 06/09/2013 06:27:43 Editing Time : 5416 min Units : mm (precision 2) Device Settings =============== Gerber Settings =============== Leading zero suppression. G01 assumed throughout. Line termination <*> . 2.3 format absolute inches. Format commands defined in Gerber file. Aperture table defined in Gerber file. Hardware arcs allowed. Drill Settings ============== Excellon Format 1 Format 2.3 absolute in mm. No zero suppression. Plots Output ============ Plot Job: "D:\Users\Public\Documents\DesignSpark PCB\opamp.mop" Gerber Output ============= D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Top Copper.gbr Layers: ------------ Top Copper D-Code Shape (thou) -------------------------------------------- D15 Round 60.00 D16 Round 48.00 D17 Round 7.87 D18 Square 60.00 D19 Rectangle 70.87 X 86.61 Rotation 90 D70 Rectangle 11.81 X 51.18 Rotation 90 D71 Round 80.00 D20 Round 10.00 D21 Round 15.00 D22 Round 50.00 Gerber Output ============= D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Documentation.gbr Layers: ---------------- Board Outlines D-Code Shape (thou) --------------------- D10 Round 5.91 Gerber Output ============= D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Bottom Copper.gbr Layers: --------------- Bottom Copper D-Code Shape (thou) --------------------- D10 Round 5.91 D15 Round 60.00 D16 Round 48.00 D17 Round 7.87 D18 Square 60.00 D71 Round 80.00 D20 Round 10.00 D21 Round 15.00 D22 Round 50.00 NC Drill Output =============== D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Drill Data - Through Hole.drl Output: -------------------------- Plated Round Drill Holes Plated Slots Plated Board Outlines Tool Size Count ID ----------------------------- T001 00.024 in 19 B T002 00.032 in 92 C T003 00.035 in 180 A T004 00.040 in 176 D T005 00.050 in 6 E ----------------------------- Total 473 ----------------------------- Tool Size Count ID ----------------------------- T001 00.025 in 1 ----------------------------- Total 1 ----------------------------- Gerber Output ============= D:\Users\Public\Documents\DesignSpark PCB\Plots\opamp - Drill Ident Drawing - Through Hole.gbr Layers: ---------------- [Through Hole] Drill Ident Drawing =================== Drill Plated Size Shape ID ------------------------------ 35 Y 100 Round A 24 Y 100 Round B 32 Y 100 Round C 40 Y 100 Round D 50 Y 100 Round E D-Code Shape (thou) --------------------- D11 Round 5.00 D23 Round 100.00 End Of Report.