LeafLabs Maple Mini solderpad

leaflabs-maple-mini / .solderpad / bom.json

3.7 KB · raw

{
	"items": [
		{
			"designator": "BUT",
			"value": "KMR211GLFS",
			"description": ""
		},
		{
			"designator": "C1",
			"value": "100uF",
			"description": "Capacitor Polarized"
		},
		{
			"designator": "C2",
			"value": "10uF",
			"description": "Capacitor"
		},
		{
			"designator": "C3",
			"value": "10uF",
			"description": "Capacitor"
		},
		{
			"designator": "C4",
			"value": "1uF",
			"description": "Capacitor"
		},
		{
			"designator": "C5",
			"value": "1uF",
			"description": "Capacitor"
		},
		{
			"designator": "C6",
			"value": "1uF",
			"description": "Capacitor"
		},
		{
			"designator": "C7",
			"value": "1uF",
			"description": "Capacitor"
		},
		{
			"designator": "C8",
			"value": "18pF",
			"description": "Capacitor"
		},
		{
			"designator": "C9",
			"value": "18pF",
			"description": "Capacitor"
		},
		{
			"designator": "C10",
			"value": "47pF",
			"description": "Capacitor"
		},
		{
			"designator": "C11",
			"value": "47pF",
			"description": "Capacitor"
		},
		{
			"designator": "D1",
			"value": "Blue",
			"description": "LEDs"
		},
		{
			"designator": "D2",
			"value": "",
			"description": "Diode"
		},
		{
			"designator": "D3",
			"value": "",
			"description": "Diode"
		},
		{
			"designator": "IC1",
			"value": "MCP1703T-3302E/CB",
			"description": ""
		},
		{
			"designator": "IC2",
			"value": "MCP1703T-3302E/CB",
			"description": ""
		},
		{
			"designator": "J1",
			"value": "M20",
			"description": "This is just like the LOCK variant in that the holes are staggared by 5 mil, but except for the last two holes.  They are not altered from the "standard" footprint layout.  This is used for a special purpose on the layout of our Graphic LCD Backpack.  Make sure you want to use this device before selecting it for you project!"
		},
		{
			"designator": "J2",
			"value": "M20",
			"description": "This is just like the LOCK variant in that the holes are staggared by 5 mil, but except for the last two holes.  They are not altered from the "standard" footprint layout.  This is used for a special purpose on the layout of our Graphic LCD Backpack.  Make sure you want to use this device before selecting it for you project!"
		},
		{
			"designator": "L1",
			"value": "ferrite bead",
			"description": "Inductors"
		},
		{
			"designator": "OSC",
			"value": "8MHz",
			"description": "Crystals"
		},
		{
			"designator": "Q1",
			"value": "NPN-BJT",
			"description": "Transistor NPN"
		},
		{
			"designator": "Q2",
			"value": "NPN-BJT",
			"description": "Transistor NPN"
		},
		{
			"designator": "R1",
			"value": "1k",
			"description": "Resistor"
		},
		{
			"designator": "R2",
			"value": "1k",
			"description": "Resistor"
		},
		{
			"designator": "R3",
			"value": "10k",
			"description": "Resistor"
		},
		{
			"designator": "R4",
			"value": "1k",
			"description": "Resistor"
		},
		{
			"designator": "R5",
			"value": "1k",
			"description": "Resistor"
		},
		{
			"designator": "R6",
			"value": "22",
			"description": "Resistor"
		},
		{
			"designator": "R7",
			"value": "22",
			"description": "Resistor"
		},
		{
			"designator": "R8",
			"value": "10k",
			"description": "Resistor"
		},
		{
			"designator": "R9",
			"value": "10k",
			"description": "Resistor"
		},
		{
			"designator": "R10",
			"value": "1.5k",
			"description": "Resistor"
		},
		{
			"designator": "R11",
			"value": "36k",
			"description": "Resistor"
		},
		{
			"designator": "R12",
			"value": "47k",
			"description": "Resistor"
		},
		{
			"designator": "RESET",
			"value": "KMR211GLFS",
			"description": ""
		},
		{
			"designator": "UC1",
			"value": "STM32F103CBT6",
			"description": ""
		},
		{
			"designator": "X1",
			"value": "USB-MINIB",
			"description": "USB Connectors"
		}
	]
}