Ubertooth Zero solderpad
ubertooth-zero / host / bluetooth_rxtx / README
This is host code for use with bluetooth_rxtx firmware. REQUIRED SOFTWARE These tools link to libbtbb (http://libbtbb.sourceforge.net/). Svn trunk should always work the latest git verions of libbtbb. Libbtbb can be built as follows: $ git clone git://git.code.sf.net/p/libbtbb/code libbtbb $ cd libbtbb/ $ make $ sudo make install This software also requires libusb 1.0 or higher: http://www.libusb.org/ THE TOOLS ubertooth-util: various utility functions including reboot into bootloader DFU mode. ubertooth-lap: sniffs a single Bluetooth channel and outputs LAPs of observed packets. ubertooth-uap: sniffs a single Bluetooth channel and determines the UAP of the device withe the LAP specified on the command line. ubertooth-dump: dumps a raw Bluetooth symbol stream from an Ubertooth board. If you pipe it into xxd, you should see various ones and zeros. If you pipe it into dd, you can find out the transfer rate (should be 1 MB/s). Timestamps are dumped to stderr.