Ubertooth Zero solderpad

ubertooth-zero / firmware / common / sections.ld

3.3 KB · raw

/*
 * Copyright 2010, 2011 Michael Ossmann
 *
 * This file is part of Project Ubertooth.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */
/*
 * Linker script for Cortex-M3
 *
 * Version:CodeSourcery Sourcery G++ Lite 2007q3-53
 * BugURL:https://support.codesourcery.com/GNUToolchain/
 *
 *  Copyright 2007 CodeSourcery.
 *
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */

EXTERN(Reset_Handler)
ENTRY(Reset_Handler)

SECTIONS
{
	.text :
	{
		. = ALIGN(0x400); /* Ensure that vector table is aligned as hardware requires. */
		_interrupt_vector_table = .;
		KEEP(*(.irq_handler_table))

		*(.text .text.* .gnu.linkonce.t.*)
		*(.rodata .rodata.* .gnu.linkonce.r.*)

		*(.eh_frame_hdr)
		*(.eh_frame)

		. = ALIGN(4);
		KEEP(*(.init))

		. = ALIGN(4);
		__preinit_array_start = .;
		KEEP (*(.preinit_array))
		__preinit_array_end = .;

		. = ALIGN(4);
		__init_array_start = .;
		KEEP (*(SORT(.init_array.*)))
		KEEP (*(.init_array))
		__init_array_end = .;

		. = ALIGN(0x4);
		KEEP (*crtbegin.o(.ctors))
		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
		KEEP (*(SORT(.ctors.*)))
		KEEP (*crtend.o(.ctors))

		. = ALIGN(4);
		KEEP(*(.fini))

		. = ALIGN(4);
		__fini_array_start = .;
		KEEP (*(.fini_array))
		KEEP (*(SORT(.fini_array.*)))
		__fini_array_end = .;

		KEEP (*crtbegin.o(.dtors))
		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
		KEEP (*(SORT(.dtors.*)))
		KEEP (*crtend.o(.dtors))

		. = ALIGN(8);
		_etext = .;

	} > rom


	.ARM.extab : 
	{
		*(.ARM.extab* .gnu.linkonce.armextab.*)
	} > rom

	__exidx_start = .;
	.ARM.exidx :
	{
		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
	} > rom
	__exidx_end = .;

	_etext = .;

	.persistent ORIGIN(ram) (NOLOAD):
	{
		_persistent_start = .;
		. += 32;
		_persistent_end = .;
	} > ram
	bootloader_ctrl = _persistent_start + 0x1C;

	.data :
	{
		_data = .;
		*(vtable)
		*(.data*)
		_edata = .;
	} > ram AT>rom

	/* zero initialized data */
	.bss :
	{
		_bss = .;
		*(.bss*)
		*(COMMON)
		_ebss = .;
	} > ram

	/* Where we put the heap with cr_clib */
	.cr_heap :
	{
		end = .;
		_pvHeapStart = .;
	} > ram

	/* Leave room above stack for IAP to run */
	_StackTop = ORIGIN(ram) + LENGTH(ram) - 32;

}