Ubertooth Zero solderpad
ubertooth-zero / firmware / common / lpc17.h
/* * lpc17.h * * registers and bit definitions for NXP LPC17xx microcontrollers * * based on information contained in: * * UM10360 * LPC17xx User manual * Rev. 2 -- 19 August 2010 * * Copyright 2010, 2011 Michael Ossmann * * This file is part of Project Ubertooth. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, Inc., 51 Franklin Street, * Boston, MA 02110-1301, USA. */ #ifndef __LPC17_H #define __LPC17_H #include <stdint.h> #define LPC17_REG(a) (*(volatile uint32_t *)(a)) #define LPC17_REG8(a) (*(volatile uint8_t *)(a)) #define LPC17_REG16(a) (*(volatile uint16_t *)(a)) /* system control registers */ /* External Interrupts */ #define EXTINT LPC17_REG(0x400FC140) /* External Interrupt Flag Register */ #define EXTMODE LPC17_REG(0x400FC148) /* External Interrupt Mode register */ #define EXTPOLAR LPC17_REG(0x400FC14C) /* External Interrupt Polarity Register */ /* Reset */ #define RSID LPC17_REG(0x400FC180) /* Reset Source Identification Register */ /* Syscon Miscellaneous Registers */ #define SCS LPC17_REG(0x400FC1A0) /* System Control and Status */ /* Reset Source Identification Register (RSID - 0x400F C180) */ #define RSID_POR (0x1 << 0) #define RSID_EXTR (0x1 << 1) #define RSID_WDTR (0x1 << 2) #define RSID_BODR (0x1 << 3) /* External Interrupt flag register (EXTINT - 0x400F C140) */ #define EXTINT_EINT0 (0x1 << 0) #define EXTINT_EINT1 (0x1 << 1) #define EXTINT_EINT2 (0x1 << 2) #define EXTINT_EINT3 (0x1 << 3) /* External Interrupt Mode register (EXTMODE - 0x400F C148) */ #define EXTMODE_EXTMODE0 (0x1 << 0) #define EXTMODE_EXTMODE1 (0x1 << 1) #define EXTMODE_EXTMODE2 (0x1 << 2) #define EXTMODE_EXTMODE3 (0x1 << 3) /* External Interrupt Polarity register (EXTPOLAR - 0x400F C14C) */ #define EXTPOLAR_EXTPOLAR0 (0x1 << 0) #define EXTPOLAR_EXTPOLAR1 (0x1 << 1) #define EXTPOLAR_EXTPOLAR2 (0x1 << 2) #define EXTPOLAR_EXTPOLAR3 (0x1 << 3) /* System Controls and Status register (SCS - 0x400F C1A0) */ #define SCS_OSCRANGE (0x1 << 4) #define SCS_OSCEN (0x1 << 5) #define SCS_OSCSTAT (0x1 << 6) /* clocking and power control registers */ /* Clock source selection */ #define CLKSRCSEL LPC17_REG(0x400FC10C) /* Clock Source Select Register */ /* Phase Locked Loop (PLL0, Main PLL) */ #define PLL0CON LPC17_REG(0x400FC080) /* PLL0 Control Register */ #define PLL0CFG LPC17_REG(0x400FC084) /* PLL0 Configuration Register */ #define PLL0STAT LPC17_REG(0x400FC088) /* PLL0 Status Register */ #define PLL0FEED LPC17_REG(0x400FC08C) /* PLL0 Feed Register */ /* Phase Locked Loop (PLL1, USB PLL) */ #define PLL1CON LPC17_REG(0x400FC0A0) /* PLL1 Control Register */ #define PLL1CFG LPC17_REG(0x400FC0A4) /* PLL1 Configuration Register */ #define PLL1STAT LPC17_REG(0x400FC0A8) /* PLL1 Status Register */ #define PLL1FEED LPC17_REG(0x400FC0AC) /* PLL1 Feed Register */ /* Clock dividers */ #define CCLKCFG LPC17_REG(0x400FC104) /* CPU Clock Configuration Register */ #define USBCLKCFG LPC17_REG(0x400FC108) /* USB Clock Configuration Register */ #define PCLKSEL0 LPC17_REG(0x400FC1A8) /* Peripheral Clock Selection register 0 */ #define PCLKSEL1 LPC17_REG(0x400FC1AC) /* Peripheral Clock Selection register 1 */ /* Power control */ #define PCON LPC17_REG(0x400FC0C0) /* Power Control Register */ #define PCONP LPC17_REG(0x400FC0C4) /* Power Control for Peripherals Register */ /* Utility */ #define CLKOUTCFG LPC17_REG(0x400FC1C8) /* Clock Output Configuration Register */ /* Clock Source Select register (CLKSRCSEL - 0x400F C10C) */ #define CLKSRCSEL_CLKSRC (0x3 << 4) /* PLL0 Control register (PLL0CON - 0x400F C080) */ #define PLL0CON_PLLE0 (0x1 << 0) #define PLL0CON_PLLC0 (0x1 << 1) /* PLL0 Configuration register (PLL0CFG - 0x400F C084) */ #define PLL0CFG_MSEL0 (0x7FFF << 0) #define PLL0CFG_NSEL0 (0xFF << 16) /* PLL0 Status register (PLL0STAT - 0x400F C088) */ #define PLL0STAT_MSEL0 (0x7FFF << 0) #define PLL0STAT_NSEL0 (0xFF << 16) #define PLL0STAT_PLLE0_STAT (0x1 << 24) #define PLL0STAT_PLLC0_STAT (0x1 << 25) #define PLL0STAT_PLOCK0 (0x1 << 26) /* PLL0 Feed register (PLL0FEED - 0x400F C08C) */ #define PLL0FEED_SEQUENCE PLL0FEED = 0xAA; PLL0FEED = 0x55 /* PLL1 Control register (PLL1CON - 0x400F C0A0) */ #define PLL1CON_PLLE1 (0x1 << 0) #define PLL1CON_PLLC1 (0x1 << 1) /* PLL1 Configuration register (PLL1CFG - 0x400F C0A4) */ #define PLL1CFG_MSEL1 (0x1F << 0) #define PLL1CFG_PSEL1 (0x3 << 5) /* PLL1 Status register (PLL1STAT - 0x400F C0A8) */ #define PLL1STAT_MSEL1 (0x1F << 0) #define PLL1STAT_PSEL1 (0x3 << 5) #define PLL1STAT_PLLE1_STAT (0x1 << 8) #define PLL1STAT_PLLC1_STAT (0x1 << 9) #define PLL1STAT_PLOCK1 (0x1 << 10) /* PLL1 Feed register (PLL1FEED - 0x400F C0AC) */ #define PLL1FEED_SEQUENCE PLL1FEED = 0xAA; PLL1FEED = 0x55 /* CPU Clock Configuration register (CCLKCFG - 0x400F C104) */ #define CCLKCFG_CCLKSEL (0xFF << 0) /* USB Clock Configuration register (USBCLKCFG - 0x400F C108) */ #define USBCLKCFG_USBSEL (0xF << 0) /* Peripheral Clock Selection register 0 (PCLKSEL0 - 0x400F C1A8) */ #define PCLKSEL0_PCLK_WDT (0x3 << 0) #define PCLKSEL0_PCLK_TIMER0 (0x3 << 2) #define PCLKSEL0_PCLK_TIMER1 (0x3 << 4) #define PCLKSEL0_PCLK_UART0 (0x3 << 6) #define PCLKSEL0_PCLK_UART1 (0x3 << 8) #define PCLKSEL0_PCLK_PWM1 (0x3 << 12) #define PCLKSEL0_PCLK_I2C0 (0x3 << 14) #define PCLKSEL0_PCLK_SPI (0x3 << 16) #define PCLKSEL0_PCLK_SSP1 (0x3 << 20) #define PCLKSEL0_PCLK_DAC (0x3 << 22) #define PCLKSEL0_PCLK_ADC (0x3 << 24) #define PCLKSEL0_PCLK_CAN1 (0x3 << 26) #define PCLKSEL0_PCLK_CAN2 (0x3 << 28) #define PCLKSEL0_PCLK_ACF (0x3 << 30) /* Peripheral Clock Selection register 1 (PCLKSEL1 - 0x400F C1AC) */ #define PCLKSEL1_PCLK_QEI (0x3 << 0) #define PCLKSEL1_PCLK_GPIOINT (0x3 << 2) #define PCLKSEL1_PCLK_PCB (0x3 << 4) #define PCLKSEL1_PCLK_I2C1 (0x3 << 6) #define PCLKSEL1_PCLK_SSP0 (0x3 << 10) #define PCLKSEL1_PCLK_TIMER2 (0x3 << 12) #define PCLKSEL1_PCLK_TIMER3 (0x3 << 14) #define PCLKSEL1_PCLK_UART2 (0x3 << 16) #define PCLKSEL1_PCLK_UART3 (0x3 << 18) #define PCLKSEL1_PCLK_I2C2 (0x3 << 20) #define PCLKSEL1_PCLK_I2S (0x3 << 22) #define PCLKSEL1_PCLK_RIT (0x3 << 26) #define PCLKSEL1_PCLK_SYSCON (0x3 << 28) #define PCLKSEL1_PCLK_MC (0x3 << 30) /* Power Mode Control register (PCON - 0x400F C0C0) */ #define PCON_PM0 (0x1 << 0) #define PCON_PM1 (0x1 << 1) #define PCON_BODRPM (0x1 << 2) #define PCON_BOGD (0x1 << 3) #define PCON_BORD (0x1 << 4) #define PCON_SMFLAG (0x1 << 8) #define PCON_DSFLAG (0x1 << 9) #define PCON_PDFLAG (0x1 << 10) #define PCON_DPDFLAG (0x1 << 11) /* Power Control for Peripherals register (PCONP - 0x400F C0C4) */ #define PCONP_PCTIM0 (0x1 << 1) #define PCONP_PCTIM1 (0x1 << 2) #define PCONP_PCUART0 (0x1 << 3) #define PCONP_PCUART1 (0x1 << 4) #define PCONP_PCPWM1 (0x1 << 6) #define PCONP_PCI2C0 (0x1 << 7) #define PCONP_PCSPI (0x1 << 8) #define PCONP_PCRTC (0x1 << 9) #define PCONP_PCSSP1 (0x1 << 10) #define PCONP_PCADC (0x1 << 12) #define PCONP_PCCAN1 (0x1 << 13) #define PCONP_PCCAN2 (0x1 << 14) #define PCONP_PCGPIO (0x1 << 15) #define PCONP_PCRIT (0x1 << 16) #define PCONP_PCMCPWM (0x1 << 17) #define PCONP_PCQEI (0x1 << 18) #define PCONP_PCI2C1 (0x1 << 19) #define PCONP_PCSSP0 (0x1 << 21) #define PCONP_PCTIM2 (0x1 << 22) #define PCONP_PCTIM3 (0x1 << 23) #define PCONP_PCUART2 (0x1 << 24) #define PCONP_PCUART3 (0x1 << 25) #define PCONP_PCI2C2 (0x1 << 26) #define PCONP_PCI2S (0x1 << 27) #define PCONP_PCGPDMA (0x1 << 29) #define PCONP_PCENET (0x1 << 30) #define PCONP_PCUSB (1U << 31) /* Clock Output Configuration register (CLKOUTCFG - 0x400F C1C8) */ #define CLKOUTCFG_CLKOUTSEL (0xF << 0) #define CLKOUTCFG_CLKOUTDIV (0xF << 4) #define CLKOUTCFG_CLKOUT_EN (0x1 << 8) #define CLKOUTCFG_CLKOUT_ACT (0x1 << 9) /* flash accelerator registers */ #define FLASHCFG LPC17_REG(0x400FC000) /* Flash Accelerator Configuration Register */ /* Flash Accelerator Configuration register (FLASHCFG - 0x400F C000) */ #define FLASHCFG_FLASHTIM (0xF << 12) /* NVIC registers */ #define ISER0 LPC17_REG(0xE000E100) /* Interrupt Set-Enable Register 0 */ #define ISER1 LPC17_REG(0xE000E104) /* Interrupt Set-Enable Register 1 */ #define ICER0 LPC17_REG(0xE000E180) /* Interrupt Clear-Enable Register 0 */ #define ICER1 LPC17_REG(0xE000E184) /* Interrupt Clear-Enable Register 1 */ #define ISPR0 LPC17_REG(0xE000E200) /* Interrupt Set-Pending Register 0 */ #define ISPR1 LPC17_REG(0xE000E204) /* Interrupt Set-Pending Register 1 */ #define ICPR0 LPC17_REG(0xE000E280) /* Interrupt Clear-Pending Register 0 */ #define ICPR1 LPC17_REG(0xE000E284) /* Interrupt Clear-Pending Register 1 */ #define IABR0 LPC17_REG(0xE000E300) /* Interrupt Active Bit Register 0 */ #define IABR1 LPC17_REG(0xE000E304) /* Interrupt Active Bit Register 1 */ #define IPR0 LPC17_REG(0xE000E400) /* Interrupt Priority Register 0 */ #define IPR1 LPC17_REG(0xE000E404) /* Interrupt Priority Register 1 */ #define IPR2 LPC17_REG(0xE000E408) /* Interrupt Priority Register 2 */ #define IPR3 LPC17_REG(0xE000E40C) /* Interrupt Priority Register 3 */ #define IPR4 LPC17_REG(0xE000E410) /* Interrupt Priority Register 4 */ #define IPR5 LPC17_REG(0xE000E414) /* Interrupt Priority Register 5 */ #define IPR6 LPC17_REG(0xE000E418) /* Interrupt Priority Register 6 */ #define IPR7 LPC17_REG(0xE000E41C) /* Interrupt Priority Register 7 */ #define IPR8 LPC17_REG(0xE000E420) /* Interrupt Priority Register 8 */ #define STIR LPC17_REG(0xE000EF00) /* Software Trigger Interrupt Register */ /* Interrupt Set-Enable Register 0 register (ISER0 - 0xE000 E100) */ #define ISER0_ISE_WDT (0x1 << 0) /* Watchdog Timer Interrupt Enable */ #define ISER0_ISE_TIMER0 (0x1 << 1) /* Timer 0 Interrupt Enable */ #define ISER0_ISE_TIMER1 (0x1 << 2) /* Timer 1. Interrupt Enable */ #define ISER0_ISE_TIMER2 (0x1 << 3) /* Timer 2 Interrupt Enable */ #define ISER0_ISE_TIMER3 (0x1 << 4) /* Timer 3 Interrupt Enable */ #define ISER0_ISE_UART0 (0x1 << 5) /* UART0 Interrupt Enable */ #define ISER0_ISE_UART1 (0x1 << 6) /* UART1 Interrupt Enable */ #define ISER0_ISE_UART2 (0x1 << 7) /* UART2 Interrupt Enable */ #define ISER0_ISE_UART3 (0x1 << 8) /* UART3 Interrupt Enable */ #define ISER0_ISE_PWM (0x1 << 9) /* PWM1 Interrupt Enable */ #define ISER0_ISE_I2C0 (0x1 << 10) /* I2C0 Interrupt Enable */ #define ISER0_ISE_I2C1 (0x1 << 11) /* I2C1 Interrupt Enable */ #define ISER0_ISE_I2C2 (0x1 << 12) /* I2C2 Interrupt Enable */ #define ISER0_ISE_SPI (0x1 << 13) /* SPI Interrupt Enable */ #define ISER0_ISE_SSP0 (0x1 << 14) /* SSP0 Interrupt Enable */ #define ISER0_ISE_SSP1 (0x1 << 15) /* SSP1 Interrupt Enable */ #define ISER0_ISE_PLL0 (0x1 << 16) /* PLL0 (Main PLL) Interrupt Enable */ #define ISER0_ISE_RTC (0x1 << 17) /* Real Time Clock (RTC) Interrupt Enable */ #define ISER0_ISE_EINT0 (0x1 << 18) /* External Interrupt 0 Interrupt Enable */ #define ISER0_ISE_EINT1 (0x1 << 19) /* External Interrupt 1 Interrupt Enable */ #define ISER0_ISE_EINT2 (0x1 << 20) /* External Interrupt 2 Interrupt Enable */ #define ISER0_ISE_EINT3 (0x1 << 21) /* External Interrupt 3 Interrupt Enable */ #define ISER0_ISE_ADC (0x1 << 22) /* ADC Interrupt Enable */ #define ISER0_ISE_BOD (0x1 << 23) /* BOD Interrupt Enable */ #define ISER0_ISE_USB (0x1 << 24) /* USB Interrupt Enable */ #define ISER0_ISE_CAN (0x1 << 25) /* CAN Interrupt Enable */ #define ISER0_ISE_DMA (0x1 << 26) /* GPDMA Interrupt Enable */ #define ISER0_ISE_I2S (0x1 << 27) /* I2S Interrupt Enable */ #define ISER0_ISE_ENET (0x1 << 28) /* Ethernet Interrupt Enable */ #define ISER0_ISE_RIT (0x1 << 29) /* Repetitive Interrupt Timer Interrupt Enable */ #define ISER0_ISE_MCPWM (0x1 << 30) /* Motor Control PWM Interrupt Enable */ #define ISER0_ISE_QEI (0x1 << 31) /* Quadrature Encoder Interface Interrupt Enable */ /* Interrupt Set-Enable Register 1 register (ISER1 - 0xE000 E104) */ #define ISER1_ISE_PLL1 (0x1 << 0) /* PLL1 (USB PLL) Interrupt Enable */ #define ISER1_ISE_USBACT (0x1 << 1) /* USB Activity Interrupt Enable */ #define ISER1_ISE_CANACT (0x1 << 2) /* CAN Activity Interrupt Enable */ /* Interrupt Clear-Enable Register 0 (ICER0 - 0xE000 E180) */ #define ICER0_ICE_WDT (0x1 << 0) /* Watchdog Timer Interrupt Disable */ #define ICER0_ICE_TIMER0 (0x1 << 1) /* Timer 0 Interrupt Disable */ #define ICER0_ICE_TIMER1 (0x1 << 2) /* Timer 1. Interrupt Disable */ #define ICER0_ICE_TIMER2 (0x1 << 3) /* Timer 2 Interrupt Disable */ #define ICER0_ICE_TIMER3 (0x1 << 4) /* Timer 3 Interrupt Disable */ #define ICER0_ICE_UART0 (0x1 << 5) /* UART0 Interrupt Disable */ #define ICER0_ICE_UART1 (0x1 << 6) /* UART1 Interrupt Disable */ #define ICER0_ICE_UART2 (0x1 << 7) /* UART2 Interrupt Disable */ #define ICER0_ICE_UART3 (0x1 << 8) /* UART3 Interrupt Disable */ #define ICER0_ICE_PWM (0x1 << 9) /* PWM1 Interrupt Disable */ #define ICER0_ICE_I2C0 (0x1 << 10) /* I2C0 Interrupt Disable */ #define ICER0_ICE_I2C1 (0x1 << 11) /* I2C1 Interrupt Disable */ #define ICER0_ICE_I2C2 (0x1 << 12) /* I2C2 Interrupt Disable */ #define ICER0_ICE_SPI (0x1 << 13) /* SPI Interrupt Disable */ #define ICER0_ICE_SSP0 (0x1 << 14) /* SSP0 Interrupt Disable */ #define ICER0_ICE_SSP1 (0x1 << 15) /* SSP1 Interrupt Disable */ #define ICER0_ICE_PLL0 (0x1 << 16) /* PLL0 (Main PLL) Interrupt Disable */ #define ICER0_ICE_RTC (0x1 << 17) /* Real Time Clock (RTC) Interrupt Disable */ #define ICER0_ICE_EINT0 (0x1 << 18) /* External Interrupt 0 Interrupt Disable */ #define ICER0_ICE_EINT1 (0x1 << 19) /* External Interrupt 1 Interrupt Disable */ #define ICER0_ICE_EINT2 (0x1 << 20) /* External Interrupt 2 Interrupt Disable */ #define ICER0_ICE_EINT3 (0x1 << 21) /* External Interrupt 3 Interrupt Disable */ #define ICER0_ICE_ADC (0x1 << 22) /* ADC Interrupt Disable */ #define ICER0_ICE_BOD (0x1 << 23) /* BOD Interrupt Disable */ #define ICER0_ICE_USB (0x1 << 24) /* USB Interrupt Disable */ #define ICER0_ICE_CAN (0x1 << 25) /* CAN Interrupt Disable */ #define ICER0_ICE_DMA (0x1 << 26) /* GPDMA Interrupt Disable */ #define ICER0_ICE_I2S (0x1 << 27) /* I2S Interrupt Disable */ #define ICER0_ICE_ENET (0x1 << 28) /* Ethernet Interrupt Disable */ #define ICER0_ICE_RIT (0x1 << 29) /* Repetitive Interrupt Timer Interrupt Disable */ #define ICER0_ICE_MCPWM (0x1 << 30) /* Motor Control PWM Interrupt Disable */ #define ICER0_ICE_QEI (0x1 << 31) /* Quadrature Encoder Interface Interrupt Disable */ /* Interrupt Clear-Enable Register 1 register (ICER1 - 0xE000 E184) */ #define ICER1_ICE_PLL1 (0x1 << 0) /* PLL1 (USB PLL) Interrupt Disable */ #define ICER1_ICE_USBACT (0x1 << 1) /* USB Activity Interrupt Disable */ #define ICER1_ICE_CANACT (0x1 << 2) /* CAN Activity Interrupt Disable */ /* Interrupt Set-Pending Register 0 register (ISPR0 - 0xE000 E200) */ #define ISPR0_ISP_WDT (0x1 << 0) /* Watchdog Timer Interrupt Pending set */ #define ISPR0_ISP_TIMER0 (0x1 << 1) /* Timer 0 Interrupt Pending set */ #define ISPR0_ISP_TIMER1 (0x1 << 2) /* Timer 1. Interrupt Pending set */ #define ISPR0_ISP_TIMER2 (0x1 << 3) /* Timer 2 Interrupt Pending set */ #define ISPR0_ISP_TIMER3 (0x1 << 4) /* Timer 3 Interrupt Pending set */ #define ISPR0_ISP_UART0 (0x1 << 5) /* UART0 Interrupt Pending set */ #define ISPR0_ISP_UART1 (0x1 << 6) /* UART1 Interrupt Pending set */ #define ISPR0_ISP_UART2 (0x1 << 7) /* UART2 Interrupt Pending set */ #define ISPR0_ISP_UART3 (0x1 << 8) /* UART3 Interrupt Pending set */ #define ISPR0_ISP_PWM (0x1 << 9) /* PWM1 Interrupt Pending set */ #define ISPR0_ISP_I2C0 (0x1 << 10) /* I2C0 Interrupt Pending set */ #define ISPR0_ISP_I2C1 (0x1 << 11) /* I2C1 Interrupt Pending set */ #define ISPR0_ISP_I2C2 (0x1 << 12) /* I2C2 Interrupt Pending set */ #define ISPR0_ISP_SPI (0x1 << 13) /* SPI Interrupt Pending set */ #define ISPR0_ISP_SSP0 (0x1 << 14) /* SSP0 Interrupt Pending set */ #define ISPR0_ISP_SSP1 (0x1 << 15) /* SSP1 Interrupt Pending set */ #define ISPR0_ISP_PLL0 (0x1 << 16) /* PLL0 (Main PLL) Interrupt Pending set */ #define ISPR0_ISP_RTC (0x1 << 17) /* Real Time Clock (RTC) Interrupt Pending set */ #define ISPR0_ISP_EINT0 (0x1 << 18) /* External Interrupt 0 Interrupt Pending set */ #define ISPR0_ISP_EINT1 (0x1 << 19) /* External Interrupt 1 Interrupt Pending set */ #define ISPR0_ISP_EINT2 (0x1 << 20) /* External Interrupt 2 Interrupt Pending set */ #define ISPR0_ISP_EINT3 (0x1 << 21) /* External Interrupt 3 Interrupt Pending set */ #define ISPR0_ISP_ADC (0x1 << 22) /* ADC Interrupt Pending set */ #define ISPR0_ISP_BOD (0x1 << 23) /* BOD Interrupt Pending set */ #define ISPR0_ISP_USB (0x1 << 24) /* USB Interrupt Pending set */ #define ISPR0_ISP_CAN (0x1 << 25) /* CAN Interrupt Pending set */ #define ISPR0_ISP_DMA (0x1 << 26) /* GPDMA Interrupt Pending set */ #define ISPR0_ISP_I2S (0x1 << 27) /* I2S Interrupt Pending set */ #define ISPR0_ISP_ENET (0x1 << 28) /* Ethernet Interrupt Pending set */ #define ISPR0_ISP_RIT (0x1 << 29) /* Repetitive Interrupt Timer Interrupt Pending set */ #define ISPR0_ISP_MCPWM (0x1 << 30) /* Motor Control PWM Interrupt Pending set */ #define ISPR0_ISP_QEI (0x1 << 31) /* Quadrature Encoder Interface Interrupt Pending set */ /* Interrupt Set-Pending Register 1 register (ISPR1 - 0xE000 E204) */ #define ISPR1_ISP_PLL1 (0x1 << 0) /* PLL1 (USB PLL) Interrupt Pending set */ #define ISPR1_ISP_USBACT (0x1 << 1) /* USB Activity Interrupt Pending set */ #define ISPR1_ISP_CANACT (0x1 << 2) /* CAN Activity Interrupt Pending set */ /* Interrupt Clear-Pending Register 0 register (ICPR0 - 0xE000 E280) */ #define ICPR0_ICP_WDT (0x1 << 0) /* Watchdog Timer Interrupt Pending clear */ #define ICPR0_ICP_TIMER0 (0x1 << 1) /* Timer 0 Interrupt Pending clear */ #define ICPR0_ICP_TIMER1 (0x1 << 2) /* Timer 1. Interrupt Pending clear */ #define ICPR0_ICP_TIMER2 (0x1 << 3) /* Timer 2 Interrupt Pending clear */ #define ICPR0_ICP_TIMER3 (0x1 << 4) /* Timer 3 Interrupt Pending clear */ #define ICPR0_ICP_UART0 (0x1 << 5) /* UART0 Interrupt Pending clear */ #define ICPR0_ICP_UART1 (0x1 << 6) /* UART1 Interrupt Pending clear */ #define ICPR0_ICP_UART2 (0x1 << 7) /* UART2 Interrupt Pending clear */ #define ICPR0_ICP_UART3 (0x1 << 8) /* UART3 Interrupt Pending clear */ #define ICPR0_ICP_PWM (0x1 << 9) /* PWM1 Interrupt Pending clear */ #define ICPR0_ICP_I2C0 (0x1 << 10) /* I2C0 Interrupt Pending clear */ #define ICPR0_ICP_I2C1 (0x1 << 11) /* I2C1 Interrupt Pending clear */ #define ICPR0_ICP_I2C2 (0x1 << 12) /* I2C2 Interrupt Pending clear */ #define ICPR0_ICP_SPI (0x1 << 13) /* SPI Interrupt Pending clear */ #define ICPR0_ICP_SSP0 (0x1 << 14) /* SSP0 Interrupt Pending clear */ #define ICPR0_ICP_SSP1 (0x1 << 15) /* SSP1 Interrupt Pending clear */ #define ICPR0_ICP_PLL0 (0x1 << 16) /* PLL0 (Main PLL) Interrupt Pending clear */ #define ICPR0_ICP_RTC (0x1 << 17) /* Real Time Clock (RTC) Interrupt Pending clear */ #define ICPR0_ICP_EINT0 (0x1 << 18) /* External Interrupt 0 Interrupt Pending clear */ #define ICPR0_ICP_EINT1 (0x1 << 19) /* External Interrupt 1 Interrupt Pending clear */ #define ICPR0_ICP_EINT2 (0x1 << 20) /* External Interrupt 2 Interrupt Pending clear */ #define ICPR0_ICP_EINT3 (0x1 << 21) /* External Interrupt 3 Interrupt Pending clear */ #define ICPR0_ICP_ADC (0x1 << 22) /* ADC Interrupt Pending clear */ #define ICPR0_ICP_BOD (0x1 << 23) /* BOD Interrupt Pending clear */ #define ICPR0_ICP_USB (0x1 << 24) /* USB Interrupt Pending clear */ #define ICPR0_ICP_CAN (0x1 << 25) /* CAN Interrupt Pending clear */ #define ICPR0_ICP_DMA (0x1 << 26) /* GPDMA Interrupt Pending clear */ #define ICPR0_ICP_I2S (0x1 << 27) /* I2S Interrupt Pending clear */ #define ICPR0_ICP_ENET (0x1 << 28) /* Ethernet Interrupt Pending clear */ #define ICPR0_ICP_RIT (0x1 << 29) /* Repetitive Interrupt Timer Interrupt Pending clear */ #define ICPR0_ICP_MCPWM (0x1 << 30) /* Motor Control PWM Interrupt Pending clear */ #define ICPR0_ICP_QEI (0x1 << 31) /* Quadrature Encoder Interface Interrupt Pending clear */ /* Interrupt Clear-Pending Register 1 register (ICPR1 - 0xE000 E284) */ #define ICPR1_ICP_PLL1 (0x1 << 0) /* PLL1 (USB PLL) Interrupt Pending clear */ #define ICPR1_ICP_USBACT (0x1 << 1) /* USB Activity Interrupt Pending clear */ #define ICPR1_ICP_CANACT (0x1 << 2) /* CAN Activity Interrupt Pending clear */ /* Interrupt Active Bit Register 0 (IABR0 - 0xE000 E300) */ #define IABR0_IAB_WDT (0x1 << 0) /* Watchdog Timer Interrupt Active */ #define IABR0_IAB_TIMER0 (0x1 << 1) /* Timer 0 Interrupt Active */ #define IABR0_IAB_TIMER1 (0x1 << 2) /* Timer 1. Interrupt Active */ #define IABR0_IAB_TIMER2 (0x1 << 3) /* Timer 2 Interrupt Active */ #define IABR0_IAB_TIMER3 (0x1 << 4) /* Timer 3 Interrupt Active */ #define IABR0_IAB_UART0 (0x1 << 5) /* UART0 Interrupt Active */ #define IABR0_IAB_UART1 (0x1 << 6) /* UART1 Interrupt Active */ #define IABR0_IAB_UART2 (0x1 << 7) /* UART2 Interrupt Active */ #define IABR0_IAB_UART3 (0x1 << 8) /* UART3 Interrupt Active */ #define IABR0_IAB_PWM (0x1 << 9) /* PWM1 Interrupt Active */ #define IABR0_IAB_I2C0 (0x1 << 10) /* I2C0 Interrupt Active */ #define IABR0_IAB_I2C1 (0x1 << 11) /* I2C1 Interrupt Active */ #define IABR0_IAB_I2C2 (0x1 << 12) /* I2C2 Interrupt Active */ #define IABR0_IAB_SPI (0x1 << 13) /* SPI Interrupt Active */ #define IABR0_IAB_SSP0 (0x1 << 14) /* SSP0 Interrupt Active */ #define IABR0_IAB_SSP1 (0x1 << 15) /* SSP1 Interrupt Active */ #define IABR0_IAB_PLL0 (0x1 << 16) /* PLL0 (Main PLL) Interrupt Active */ #define IABR0_IAB_RTC (0x1 << 17) /* Real Time Clock (RTC) Interrupt Active */ #define IABR0_IAB_EINT0 (0x1 << 18) /* External Interrupt 0 Interrupt Active */ #define IABR0_IAB_EINT1 (0x1 << 19) /* External Interrupt 1 Interrupt Active */ #define IABR0_IAB_EINT2 (0x1 << 20) /* External Interrupt 2 Interrupt Active */ #define IABR0_IAB_EINT3 (0x1 << 21) /* External Interrupt 3 Interrupt Active */ #define IABR0_IAB_ADC (0x1 << 22) /* ADC Interrupt Active */ #define IABR0_IAB_BOD (0x1 << 23) /* BOD Interrupt Active */ #define IABR0_IAB_USB (0x1 << 24) /* USB Interrupt Active */ #define IABR0_IAB_CAN (0x1 << 25) /* CAN Interrupt Active */ #define IABR0_IAB_DMA (0x1 << 26) /* GPDMA Interrupt Active */ #define IABR0_IAB_I2S (0x1 << 27) /* I2S Interrupt Active */ #define IABR0_IAB_ENET (0x1 << 28) /* Ethernet Interrupt Active */ #define IABR0_IAB_RIT (0x1 << 29) /* Repetitive Interrupt Timer Interrupt Active */ #define IABR0_IAB_MCPWM (0x1 << 30) /* Motor Control PWM Interrupt Active */ #define IABR0_IAB_QEI (0x1 << 31) /* Quadrature Encoder Interface Interrupt Active */ /* Interrupt Active Bit Register 1 (IABR1 - 0xE000 E304) */ #define IABR1_IAB_PLL1 (0x1 << 0) /* PLL1 (USB PLL) Interrupt Active */ #define IABR1_IAB_USBACT (0x1 << 1) /* USB Activity Interrupt Active */ #define IABR1_IAB_CANACT (0x1 << 2) /* CAN Activity Interrupt Active */ /* Interrupt Priority Register 0 (IPR0 - 0xE000 E400) */ #define IPR0_IP_WDT (0x1F << 3) /* Watchdog Timer Interrupt Priority */ #define IPR0_IP_TIMER0 (0x1F << 11) /* Timer 0 Interrupt Priority */ #define IPR0_IP_TIMER1 (0x1F << 19) /* Timer 1 Interrupt Priority */ #define IPR0_IP_TIMER2 (0x1F << 27) /* Timer 2 Interrupt Priority */ /* Interrupt Priority Register 1 (IPR1 - 0xE000 E404) */ #define IPR1_IP_TIMER3 (0x1F << 3) /* Timer 3 Interrupt Priority */ #define IPR1_IP_UART0 (0x1F << 11) /* UART0 Interrupt Priority */ #define IPR1_IP_UART1 (0x1F << 19) /* UART1 Interrupt Priority */ #define IPR1_IP_UART2 (0x1F << 27) /* UART2 Interrupt Priority */ /* Interrupt Priority Register 2 (IPR2 - 0xE000 E408) */ #define IPR2_IP_UART3 (0x1F << 3) /* UART3 Interrupt Priority */ #define IPR2_IP_PWM (0x1F << 11) /* PWM Interrupt Priority */ #define IPR2_IP_I2C0 (0x1F << 19) /* I2C0 Interrupt Priority */ #define IPR2_IP_I2C1 (0x1F << 27) /* I2C1 Interrupt Priority */ /* Interrupt Priority Register 3 (IPR3 - 0xE000 E40C) */ #define IPR3_IP_I2C2 (0x1F << 3) /* I2C2 Interrupt Priority */ #define IPR3_IP_SPI (0x1F << 11) /* SPI Interrupt Priority */ #define IPR3_IP_SSP0 (0x1F << 19) /* SSP0 Interrupt Priority */ #define IPR3_IP_SSP1 (0x1F << 27) /* SSP1 Interrupt Priority */ /* Interrupt Priority Register 4 (IPR4 - 0xE000 E410) */ #define IPR4_IP_PLL0 (0x1F << 3) /* PLL0 (Main PLL) Interrupt Priority */ #define IPR4_IP_RTC (0x1F << 11) /* Real Time Clock (RTC) Interrupt Priority */ #define IPR4_IP_EINT0 (0x1F << 19) /* External Interrupt 0 Interrupt Priority */ #define IPR4_IP_EINT1 (0x1F << 27) /* External Interrupt 1 Interrupt Priority */ /* Interrupt Priority Register 5 (IPR5 - 0xE000 E414) */ #define IPR5_IP_EINT2 (0x1F << 3) /* External Interrupt 2 Interrupt Priority */ #define IPR5_IP_EINT3 (0x1F << 11) /* External Interrupt 3 Interrupt Priority */ #define IPR5_IP_ADC (0x1F << 19) /* ADC Interrupt Priority */ #define IPR5_IP_BOD (0x1F << 27) /* BOD Interrupt Priority */ /* Interrupt Priority Register 6 (IPR6 - 0xE000 E418) */ #define IPR6_IP_USB (0x1F << 3) /* USB Interrupt Priority */ #define IPR6_IP_CAN (0x1F << 11) /* CAN Interrupt Priority */ #define IPR6_IP_DMA (0x1F << 19) /* GPDMA Interrupt Priority */ #define IPR6_IP_I2S (0x1F << 27) /* I2S Interrupt Priority */ /* Interrupt Priority Register 7 (IPR7 - 0xE000 E41C) */ #define IPR7_IP_ENET (0x1F << 3) /* Ethernet Interrupt Priority */ #define IPR7_IP_RIT (0x1F << 11) /* Repetitive Interrupt Timer Interrupt Priority */ #define IPR7_IP_MCPWM (0x1F << 19) /* Motor Control PWM Interrupt Priority */ #define IPR7_IP_QEI (0x1F << 27) /* Quadrature Encoder Interface Interrupt Priority */ /* Interrupt Priority Register 8 (IPR8 - 0xE000 E420) */ #define IPR8_IP_PLL1 (0x1F << 3) /* PLL1 (USB PLL) Interrupt Priority */ #define IPR8_IP_USBACT (0x1F << 11) /* USB Activity Interrupt Priority */ #define IPR8_IP_CANACT (0x1F << 19) /* CAN Activity Interrupt Priority */ /* Software Trigger Interrupt Register (STIR - 0xE000 EF00) */ #define STIR_INTID (0x1FF << 0) /* Cortex-M3 interrupt IDs */ #define IRQ_NonMaskableInt (-14) #define IRQ_MemoryManagement (-12) #define IRQ_BusFault (-11) #define IRQ_UsageFault (-10) #define IRQ_SVCall (-5) #define IRQ_DebugMonitor (-4) #define IRQ_PendSV (-2) #define IRQ_SysTick (-1) /* LPC17xx interrupt IDs */ #define IRQ_WDT (0) #define IRQ_TIMER0 (1) #define IRQ_TIMER1 (2) #define IRQ_TIMER2 (3) #define IRQ_TIMER3 (4) #define IRQ_UART0 (5) #define IRQ_UART1 (6) #define IRQ_UART2 (7) #define IRQ_UART3 (8) #define IRQ_PWM (9) #define IRQ_I2C0 (10) #define IRQ_I2C1 (11) #define IRQ_I2C2 (12) #define IRQ_SPI (13) #define IRQ_SSP0 (14) #define IRQ_SSP1 (15) #define IRQ_PLL0 (16) #define IRQ_RTC (17) #define IRQ_EINT0 (18) #define IRQ_EINT1 (19) #define IRQ_EINT2 (20) #define IRQ_EINT3 (21) #define IRQ_ADC (22) #define IRQ_BOD (23) #define IRQ_USB (24) #define IRQ_CAN (25) #define IRQ_DMA (26) #define IRQ_I2S (27) #define IRQ_ENET (28) #define IRQ_RIT (29) #define IRQ_MCPWM (30) #define IRQ_QEI (31) #define IRQ_PLL1 (32) #define IRQ_USBACT (33) #define IRQ_CANACT (34) /* System Control Block (SCB) egisters (UM10360 table 654) */ #define SCB_ACTLR LPC17_REG(0xE000E008) /* Auxiliary Control Register */ #define SCB_CPUID LPC17_REG(0xE000ED00) /* CPUID Base Register */ #define SCB_ICSR LPC17_REG(0xE000ED04) /* Interrupt Control and State Register */ #define SCB_VTOR LPC17_REG(0xE000ED08) /* Vector Table Offset Register */ #define SCB_AIRCR LPC17_REG(0xE000ED0C) /* Application Interrupt and Reset Control Register */ #define SCB_SCR LPC17_REG(0xE000ED10) /* System Control Register */ #define SCB_CCR LPC17_REG(0xE000ED14) /* Configuration and Control Register */ #define SCB_SHPR1 LPC17_REG(0xE000ED18) /* System Handler Priority - register 1 */ #define SCB_SHPR2 LPC17_REG(0xE000ED1C) /* System Handler Priority - register 2 */ #define SCB_SHPR3 LPC17_REG(0xE000ED20) /* System Handler Priority - register 3 */ #define SCB_SHCRS LPC17_REG(0xE000ED24) /* System Handler Control and State Register */ #define SCB_CFSR LPC17_REG(0xE000ED28) /* Configurable Fault Status Register */ //#define SCB_MMSR LPC17_REG(0xE000ED28) /* Memory Management Fault Status Register (CFSR sub-register) */ //#define SCB_BFSR LPC17_REG(0xE000ED29) /* Bus Fault Status Register (CFSR sub-register) */ //#define SCB_UFSR LPC17_REG(0xE000ED2A) /* Usage Fault Status Register (CFSR sub-register) */ #define SCB_HFSR LPC17_REG(0xE000ED2C) /* Hard Fault Status Register */ #define SCB_MMFAR LPC17_REG(0xE000ED34) /* Memory Management Fault Address Register */ #define SCB_BFAR LPC17_REG(0xE000ED38) /* Bus Fault Address Register */ /* pin connect block registers */ #define PINSEL0 LPC17_REG(0x4002C000) /* Pin function select register 0 */ #define PINSEL1 LPC17_REG(0x4002C004) /* Pin function select register 1 */ #define PINSEL2 LPC17_REG(0x4002C008) /* Pin function select register 2 */ #define PINSEL3 LPC17_REG(0x4002C00C) /* Pin function select register 3 */ #define PINSEL4 LPC17_REG(0x4002C010) /* Pin function select register 4 */ #define PINSEL7 LPC17_REG(0x4002C01C) /* Pin function select register 7 */ #define PINSEL8 LPC17_REG(0x4002C020) /* Pin function select register 8 */ #define PINSEL9 LPC17_REG(0x4002C024) /* Pin function select register 9 */ #define PINSEL10 LPC17_REG(0x4002C028) /* Pin function select register 10 */ #define PINMODE0 LPC17_REG(0x4002C040) /* Pin mode select register 0 */ #define PINMODE1 LPC17_REG(0x4002C044) /* Pin mode select register 1 */ #define PINMODE2 LPC17_REG(0x4002C048) /* Pin mode select register 2 */ #define PINMODE3 LPC17_REG(0x4002C04C) /* Pin mode select register 3 */ #define PINMODE4 LPC17_REG(0x4002C050) /* Pin mode select register 4 */ #define PINMODE5 LPC17_REG(0x4002C054) /* Pin mode select register 5 */ #define PINMODE6 LPC17_REG(0x4002C058) /* Pin mode select register 6 */ #define PINMODE7 LPC17_REG(0x4002C05C) /* Pin mode select register 7 */ #define PINMODE9 LPC17_REG(0x4002C064) /* Pin mode select register 9 */ #define PINMODE_OD0 LPC17_REG(0x4002C068) /* Open drain mode control register 0 */ #define PINMODE_OD1 LPC17_REG(0x4002C06C) /* Open drain mode control register 1 */ #define PINMODE_OD2 LPC17_REG(0x4002C070) /* Open drain mode control register 2 */ #define PINMODE_OD3 LPC17_REG(0x4002C074) /* Open drain mode control register 3 */ #define PINMODE_OD4 LPC17_REG(0x4002C078) /* Open drain mode control register 4 */ #define I2CPADCFG LPC17_REG(0x4002C07C) /* I2C Pin Configuration register */ /* Pin function select register 0 (PINSEL0 - 0x4002 C000) */ #define PINSEL0_P0_0 (0x3 << 0) #define PINSEL0_P0_1 (0x3 << 2) #define PINSEL0_P0_2 (0x3 << 4) #define PINSEL0_P0_3 (0x3 << 6) #define PINSEL0_P0_4 (0x3 << 8) #define PINSEL0_P0_5 (0x3 << 10) #define PINSEL0_P0_6 (0x3 << 12) #define PINSEL0_P0_7 (0x3 << 14) #define PINSEL0_P0_8 (0x3 << 16) #define PINSEL0_P0_9 (0x3 << 18) #define PINSEL0_P0_10 (0x3 << 20) #define PINSEL0_P0_11 (0x3 << 22) #define PINSEL0_P0_15 (0x3 << 30) /* Pin function select register 1 (PINSEL1 - 0x4002 C004) */ #define PINSEL1_P0_16 (0x3 << 0) #define PINSEL1_P0_17 (0x3 << 2) #define PINSEL1_P0_18 (0x3 << 4) #define PINSEL1_P0_19 (0x3 << 6) #define PINSEL1_P0_20 (0x3 << 8) #define PINSEL1_P0_21 (0x3 << 10) #define PINSEL1_P0_22 (0x3 << 12) #define PINSEL1_P0_23 (0x3 << 14) #define PINSEL1_P0_24 (0x3 << 16) #define PINSEL1_P0_25 (0x3 << 18) #define PINSEL1_P0_26 (0x3 << 20) #define PINSEL1_P0_27 (0x3 << 22) #define PINSEL1_P0_28 (0x3 << 24) #define PINSEL1_P0_29 (0x3 << 26) #define PINSEL1_P0_30 (0x3 << 28) /* Pin function select register 2 (PINSEL2 - 0x4002 C008) */ #define PINSEL2_P1_0 (0x3 << 0) #define PINSEL2_P1_1 (0x3 << 2) #define PINSEL2_P1_4 (0x3 << 8) #define PINSEL2_P1_8 (0x3 << 16) #define PINSEL2_P1_9 (0x3 << 18) #define PINSEL2_P1_10 (0x3 << 20) #define PINSEL2_P1_14 (0x3 << 28) #define PINSEL2_P1_15 (0x3 << 30) /* Pin function select register 3 (PINSEL3 - 0x4002 C00C) */ #define PINSEL3_P1_16 (0x3 << 0) #define PINSEL3_P1_17 (0x3 << 2) #define PINSEL3_P1_18 (0x3 << 4) #define PINSEL3_P1_19 (0x3 << 6) #define PINSEL3_P1_20 (0x3 << 8) #define PINSEL3_P1_21 (0x3 << 10) #define PINSEL3_P1_22 (0x3 << 12) #define PINSEL3_P1_23 (0x3 << 14) #define PINSEL3_P1_24 (0x3 << 16) #define PINSEL3_P1_25 (0x3 << 18) #define PINSEL3_P1_26 (0x3 << 20) #define PINSEL3_P1_27 (0x3 << 22) #define PINSEL3_P1_28 (0x3 << 24) #define PINSEL3_P1_29 (0x3 << 26) #define PINSEL3_P1_30 (0x3 << 28) #define PINSEL3_P1_31 (0x3 << 30) /* Pin function select register 4 (PINSEL4 - 0x4002 C010) */ #define PINSEL4_P2_0 (0x3 << 0) #define PINSEL4_P2_1 (0x3 << 2) #define PINSEL4_P2_2 (0x3 << 4) #define PINSEL4_P2_3 (0x3 << 6) #define PINSEL4_P2_4 (0x3 << 8) #define PINSEL4_P2_5 (0x3 << 10) #define PINSEL4_P2_6 (0x3 << 12) #define PINSEL4_P2_7 (0x3 << 14) #define PINSEL4_P2_8 (0x3 << 16) #define PINSEL4_P2_9 (0x3 << 18) #define PINSEL4_P2_10 (0x3 << 20) #define PINSEL4_P2_11 (0x3 << 22) #define PINSEL4_P2_12 (0x3 << 24) #define PINSEL4_P2_13 (0x3 << 26) /* Pin function select register 7 (PINSEL7 - 0x4002 C01C) */ #define PINSEL7_P3_25 (0x3 << 18) #define PINSEL7_P3_26 (0x3 << 20) /* Pin function select register 9 (PINSEL9 - 0x4002 C024) */ #define PINSEL9_P4_28 (0x3 << 24) #define PINSEL9_P4_29 (0x3 << 26) /* Pin function select register 10 (PINSEL10 - 0x4002 C028) */ #define PINSEL10_GPIOTRACE (0x1 << 3) /* Pin Mode select register 0 (PINMODE0 - 0x4002 C040) */ #define PINMODE0_P0_00MODE (0x3 << 0) #define PINMODE0_P0_01MODE (0x3 << 2) #define PINMODE0_P0_02MODE (0x3 << 4) #define PINMODE0_P0_03MODE (0x3 << 6) #define PINMODE0_P0_04MODE (0x3 << 8) #define PINMODE0_P0_05MODE (0x3 << 10) #define PINMODE0_P0_06MODE (0x3 << 12) #define PINMODE0_P0_07MODE (0x3 << 14) #define PINMODE0_P0_08MODE (0x3 << 16) #define PINMODE0_P0_09MODE (0x3 << 18) #define PINMODE0_P0_10MODE (0x3 << 20) #define PINMODE0_P0_11MODE (0x3 << 22) #define PINMODE0_P0_15MODE (0x3 << 30) /* Pin Mode select register 1 (PINMODE1 - 0x4002 C044) */ #define PIMODE1_P0_16MODE (0x3 << 0) #define PIMODE1_P0_17MODE (0x3 << 2) #define PIMODE1_P0_18MODE (0x3 << 4) #define PIMODE1_P0_19MODE (0x3 << 6) #define PIMODE1_P0_20MODE (0x3 << 8) #define PIMODE1_P0_21MODE (0x3 << 10) #define PIMODE1_P0_22MODE (0x3 << 12) #define PIMODE1_P0_23MODE (0x3 << 14) #define PIMODE1_P0_24MODE (0x3 << 16) #define PIMODE1_P0_25MODE (0x3 << 18) #define PIMODE1_P0_26MODE (0x3 << 20) /* Pin Mode select register 2 (PINMODE2 - 0x4002 C048) */ #define PINMODE2_P1_00MODE (0x3 << 0) #define PINMODE2_P1_01MODE (0x3 << 2) #define PINMODE2_P1_04MODE (0x3 << 8) #define PINMODE2_P1_08MODE (0x3 << 16) #define PINMODE2_P1_09MODE (0x3 << 18) #define PINMODE2_P1_10MODE (0x3 << 20) #define PINMODE2_P1_14MODE (0x3 << 28) #define PINMODE2_P1_15MODE (0x3 << 30) /* Pin Mode select register 3 (PINMODE3 - 0x4002 C04C) */ #define PINMODE3_P1_16MODE (0x3 << 0) #define PINMODE3_P1_17MODE (0x3 << 2) #define PINMODE3_P1_18MODE (0x3 << 4) #define PINMODE3_P1_19MODE (0x3 << 6) #define PINMODE3_P1_20MODE (0x3 << 8) #define PINMODE3_P1_21MODE (0x3 << 10) #define PINMODE3_P1_22MODE (0x3 << 12) #define PINMODE3_P1_23MODE (0x3 << 14) #define PINMODE3_P1_24MODE (0x3 << 16) #define PINMODE3_P1_25MODE (0x3 << 18) #define PINMODE3_P1_26MODE (0x3 << 20) #define PINMODE3_P1_27MODE (0x3 << 22) #define PINMODE3_P1_28MODE (0x3 << 24) #define PINMODE3_P1_29MODE (0x3 << 26) #define PINMODE3_P1_30MODE (0x3 << 28) #define PINMODE3_P1_31MODE (0x3 << 30) /* Pin Mode select register 4 (PINMODE4 - 0x4002 C050) */ #define PINMODE4_P2_00MODE (0x3 << 0) #define PINMODE4_P2_01MODE (0x3 << 2) #define PINMODE4_P2_02MODE (0x3 << 4) #define PINMODE4_P2_03MODE (0x3 << 6) #define PINMODE4_P2_04MODE (0x3 << 8) #define PINMODE4_P2_05MODE (0x3 << 10) #define PINMODE4_P2_06MODE (0x3 << 12) #define PINMODE4_P2_07MODE (0x3 << 14) #define PINMODE4_P2_08MODE (0x3 << 16) #define PINMODE4_P2_09MODE (0x3 << 18) #define PINMODE4_P2_10MODE (0x3 << 20) #define PINMODE4_P2_11MODE (0x3 << 22) #define PINMODE4_P2_12MODE (0x3 << 24) #define PINMODE4_P2_13MODE (0x3 << 26) /* Pin Mode select register 7 (PINMODE7 - 0x4002 C05C) */ #define PINMODE7_P3_25MODE (0x3 << 18) #define PINMODE7_P3_26MODE (0x3 << 20) /* Pin Mode select register 9 (PINMODE9 - 0x4002 C064) */ #define PINMODE9_P4_28MODE (0x3 << 24) #define PINMODE9_P4_29MODE (0x3 << 26) /* * skipped: * * Open Drain Pin Mode select register 0 (PINMODE_OD0 - 0x4002 C068) * Open Drain Pin Mode select register 1 (PINMODE_OD1 - 0x4002 C06C) * Open Drain Pin Mode select register 2 (PINMODE_OD2 - 0x4002 C070) * Open Drain Pin Mode select register 3 (PINMODE_OD3 - 0x4002 C074) * Open Drain Pin Mode select register 4 (PINMODE_OD4 - 0x4002 C078) */ /* I2C Pin Configuration register (I2CPADCFG - 0x4002 C07C) */ #define I2CPADCFG_SDADRV0 (0x1 << 0) #define I2CPADCFG_SDAI2C0 (0x1 << 1) #define I2CPADCFG_SCLDRV0 (0x1 << 2) #define I2CPADCFG_SCLI2C0 (0x1 << 3) /* GPIO registers */ #define FIO0DIR LPC17_REG(0x2009C000) /* Fast GPIO Port Direction control register 0 (FIODIR) */ #define FIO1DIR LPC17_REG(0x2009C020) /* Fast GPIO Port Direction control register 1 (FIODIR) */ #define FIO2DIR LPC17_REG(0x2009C040) /* Fast GPIO Port Direction control register 2 (FIODIR) */ #define FIO3DIR LPC17_REG(0x2009C060) /* Fast GPIO Port Direction control register 3 (FIODIR) */ #define FIO4DIR LPC17_REG(0x2009C080) /* Fast GPIO Port Direction control register 4 (FIODIR) */ #define FIO0MASK LPC17_REG(0x2009C010) /* Fast Mask register for port 0 (FIOMASK) */ #define FIO1MASK LPC17_REG(0x2009C030) /* Fast Mask register for port 1 (FIOMASK) */ #define FIO2MASK LPC17_REG(0x2009C050) /* Fast Mask register for port 2 (FIOMASK) */ #define FIO3MASK LPC17_REG(0x2009C070) /* Fast Mask register for port 3 (FIOMASK) */ #define FIO4MASK LPC17_REG(0x2009C090) /* Fast Mask register for port 4 (FIOMASK) */ #define FIO0PIN LPC17_REG(0x2009C014) /* Fast Port 0 Pin value register using FIOMASK (FIOPIN) */ #define FIO1PIN LPC17_REG(0x2009C034) /* Fast Port 1 Pin value register using FIOMASK (FIOPIN) */ #define FIO2PIN LPC17_REG(0x2009C054) /* Fast Port 2 Pin value register using FIOMASK (FIOPIN) */ #define FIO3PIN LPC17_REG(0x2009C074) /* Fast Port 3 Pin value register using FIOMASK (FIOPIN) */ #define FIO4PIN LPC17_REG(0x2009C094) /* Fast Port 4 Pin value register using FIOMASK (FIOPIN) */ #define FIO0SET LPC17_REG(0x2009C018) /* Fast Port 0 Output Set register using FIOMASK (FIOSET) */ #define FIO1SET LPC17_REG(0x2009C038) /* Fast Port 1 Output Set register using FIOMASK (FIOSET) */ #define FIO2SET LPC17_REG(0x2009C058) /* Fast Port 2 Output Set register using FIOMASK (FIOSET) */ #define FIO3SET LPC17_REG(0x2009C078) /* Fast Port 3 Output Set register using FIOMASK (FIOSET) */ #define FIO4SET LPC17_REG(0x2009C098) /* Fast Port 4 Output Set register using FIOMASK (FIOSET) */ #define FIO0CLR LPC17_REG(0x2009C01C) /* Fast Port 0 Output Clear register using FIOMASK (FIOCLR) */ #define FIO1CLR LPC17_REG(0x2009C03C) /* Fast Port 1 Output Clear register using FIOMASK (FIOCLR) */ #define FIO2CLR LPC17_REG(0x2009C05C) /* Fast Port 2 Output Clear register using FIOMASK (FIOCLR) */ #define FIO3CLR LPC17_REG(0x2009C07C) /* Fast Port 3 Output Clear register using FIOMASK (FIOCLR) */ #define FIO4CLR LPC17_REG(0x2009C09C) /* Fast Port 4 Output Clear register using FIOMASK (FIOCLR) */ /* GPIO interrupt registers */ #define IO0IntEnR LPC17_REG(0x40028090) /* IntEnR: GPIO Interrupt Enable for Rising edge */ #define IO2IntEnR LPC17_REG(0x400280B0) /* IntEnR: GPIO Interrupt Enable for Rising edge */ #define IO0IntEnF LPC17_REG(0x40028094) /* IntEnF: GPIO Interrupt Enable for Falling edge */ #define IO2IntEnF LPC17_REG(0x400280B4) /* IntEnF: GPIO Interrupt Enable for Falling edge */ #define IO0IntStatR LPC17_REG(0x40028084) /* IntStatR: GPIO Interrupt Status for Rising edge */ #define IO2IntStatR LPC17_REG(0x400280A4) /* IntStatR: GPIO Interrupt Status for Rising edge */ #define IO0IntStatF LPC17_REG(0x40028088) /* IntStatF: GPIO Interrupt Status for Falling edge */ #define IO2IntStatF LPC17_REG(0x400280A8) /* IntStatF: GPIO Interrupt Status for Falling edge */ #define IO0IntClr LPC17_REG(0x4002808C) /* IntClr: GPIO Interrupt Clear */ #define IO2IntClr LPC17_REG(0x400280AC) /* IntClr: GPIO Interrupt Clear */ #define IOIntStatus LPC17_REG(0x40028080) /* IntStatus: GPIO overall Interrupt Status */ /* byte accessible FIODIR registers */ #define FIO0DIR0 LPC17_REG8(0x2009C000) #define FIO1DIR0 LPC17_REG8(0x2009C020) #define FIO2DIR0 LPC17_REG8(0x2009C040) #define FIO3DIR0 LPC17_REG8(0x2009C060) #define FIO4DIR0 LPC17_REG8(0x2009C080) #define FIO0DIR1 LPC17_REG8(0x2009C001) #define FIO1DIR1 LPC17_REG8(0x2009C021) #define FIO2DIR1 LPC17_REG8(0x2009C041) #define FIO3DIR1 LPC17_REG8(0x2009C061) #define FIO4DIR1 LPC17_REG8(0x2009C081) #define FIO0DIR2 LPC17_REG8(0x2009C002) #define FIO1DIR2 LPC17_REG8(0x2009C022) #define FIO2DIR2 LPC17_REG8(0x2009C042) #define FIO3DIR2 LPC17_REG8(0x2009C062) #define FIO4DIR2 LPC17_REG8(0x2009C082) #define FIO0DIR3 LPC17_REG8(0x2009C003) #define FIO1DIR3 LPC17_REG8(0x2009C023) #define FIO2DIR3 LPC17_REG8(0x2009C043) #define FIO3DIR3 LPC17_REG8(0x2009C063) #define FIO4DIR3 LPC17_REG8(0x2009C083) /* half-word accessible FIODIR registers */ #define FIO0DIRL LPC17_REG16(0x2009C000) #define FIO1DIRL LPC17_REG16(0x2009C020) #define FIO2DIRL LPC17_REG16(0x2009C040) #define FIO3DIRL LPC17_REG16(0x2009C060) #define FIO4DIRL LPC17_REG16(0x2009C080) #define FIO0DIRU LPC17_REG16(0x2009C002) #define FIO1DIRU LPC17_REG16(0x2009C022) #define FIO2DIRU LPC17_REG16(0x2009C042) #define FIO3DIRU LPC17_REG16(0x2009C062) #define FIO4DIRU LPC17_REG16(0x2009C082) /* byte accessible FIOSET registers */ #define FIO0SET0 LPC17_REG8(0x2009C018) #define FIO1SET0 LPC17_REG8(0x2009C038) #define FIO2SET0 LPC17_REG8(0x2009C058) #define FIO3SET0 LPC17_REG8(0x2009C078) #define FIO4SET0 LPC17_REG8(0x2009C098) #define FIO0SET1 LPC17_REG8(0x2009C019) #define FIO1SET1 LPC17_REG8(0x2009C039) #define FIO2SET1 LPC17_REG8(0x2009C059) #define FIO3SET1 LPC17_REG8(0x2009C079) #define FIO4SET1 LPC17_REG8(0x2009C099) #define FIO0SET2 LPC17_REG8(0x2009C01A) #define FIO1SET2 LPC17_REG8(0x2009C03A) #define FIO2SET2 LPC17_REG8(0x2009C05A) #define FIO3SET2 LPC17_REG8(0x2009C07A) #define FIO4SET2 LPC17_REG8(0x2009C09A) #define FIO0SET3 LPC17_REG8(0x2009C01B) #define FIO1SET3 LPC17_REG8(0x2009C03B) #define FIO2SET3 LPC17_REG8(0x2009C05B) #define FIO3SET3 LPC17_REG8(0x2009C07B) #define FIO4SET3 LPC17_REG8(0x2009C09B) /* half-word accessible FIOSET registers */ #define FIO0SETL LPC17_REG16(0x2009C018) #define FIO1SETL LPC17_REG16(0x2009C038) #define FIO2SETL LPC17_REG16(0x2009C058) #define FIO3SETL LPC17_REG16(0x2009C078) #define FIO4SETL LPC17_REG16(0x2009C098) #define FIO0SETU LPC17_REG16(0x2009C01A) #define FIO1SETU LPC17_REG16(0x2009C03A) #define FIO2SETU LPC17_REG16(0x2009C05A) #define FIO3SETU LPC17_REG16(0x2009C07A) #define FIO4SETU LPC17_REG16(0x2009C09A) /* byte accessible FIOCLR registers */ #define FIO0CLR0 LPC17_REG8(0x2009C01C) #define FIO1CLR0 LPC17_REG8(0x2009C03C) #define FIO2CLR0 LPC17_REG8(0x2009C05C) #define FIO3CLR0 LPC17_REG8(0x2009C07C) #define FIO4CLR0 LPC17_REG8(0x2009C09C) #define FIO0CLR1 LPC17_REG8(0x2009C01D) #define FIO1CLR1 LPC17_REG8(0x2009C03D) #define FIO2CLR1 LPC17_REG8(0x2009C05D) #define FIO3CLR1 LPC17_REG8(0x2009C07D) #define FIO4CLR1 LPC17_REG8(0x2009C09D) #define FIO0CLR2 LPC17_REG8(0x2009C01E) #define FIO1CLR2 LPC17_REG8(0x2009C03E) #define FIO2CLR2 LPC17_REG8(0x2009C05E) #define FIO3CLR2 LPC17_REG8(0x2009C07E) #define FIO4CLR2 LPC17_REG8(0x2009C09E) #define FIO0CLR3 LPC17_REG8(0x2009C01F) #define FIO1CLR3 LPC17_REG8(0x2009C03F) #define FIO2CLR3 LPC17_REG8(0x2009C05F) #define FIO3CLR3 LPC17_REG8(0x2009C07F) #define FIO4CLR3 LPC17_REG8(0x2009C09F) /* half-word accessible FIOCLR registers */ #define FIO0CLRL LPC17_REG16(0x2009C01C) #define FIO1CLRL LPC17_REG16(0x2009C03C) #define FIO2CLRL LPC17_REG16(0x2009C05C) #define FIO3CLRL LPC17_REG16(0x2009C07C) #define FIO4CLRL LPC17_REG16(0x2009C09C) #define FIO0CLRU LPC17_REG16(0x2009C01E) #define FIO1CLRU LPC17_REG16(0x2009C03E) #define FIO2CLRU LPC17_REG16(0x2009C05E) #define FIO3CLRU LPC17_REG16(0x2009C07E) #define FIO4CLRU LPC17_REG16(0x2009C09E) /* byte accessible FIOPIN registers */ #define FIO0PIN0 LPC17_REG8(0x2009C014) #define FIO1PIN0 LPC17_REG8(0x2009C034) #define FIO2PIN0 LPC17_REG8(0x2009C054) #define FIO3PIN0 LPC17_REG8(0x2009C074) #define FIO4PIN0 LPC17_REG8(0x2009C094) #define FIO0PIN1 LPC17_REG8(0x2009C015) #define FIO1PIN1 LPC17_REG8(0x2009C035) #define FIO2PIN1 LPC17_REG8(0x2009C055) #define FIO3PIN1 LPC17_REG8(0x2009C075) #define FIO4PIN1 LPC17_REG8(0x2009C095) #define FIO0PIN2 LPC17_REG8(0x2009C016) #define FIO1PIN2 LPC17_REG8(0x2009C036) #define FIO2PIN2 LPC17_REG8(0x2009C056) #define FIO3PIN2 LPC17_REG8(0x2009C076) #define FIO4PIN2 LPC17_REG8(0x2009C096) #define FIO0PIN3 LPC17_REG8(0x2009C017) #define FIO1PIN3 LPC17_REG8(0x2009C037) #define FIO2PIN3 LPC17_REG8(0x2009C057) #define FIO3PIN3 LPC17_REG8(0x2009C077) #define FIO4PIN3 LPC17_REG8(0x2009C097) /* half-word accessible FIOPIN registers */ #define FIO0PINL LPC17_REG16(0x2009C014) #define FIO1PINL LPC17_REG16(0x2009C034) #define FIO2PINL LPC17_REG16(0x2009C054) #define FIO3PINL LPC17_REG16(0x2009C074) #define FIO4PINL LPC17_REG16(0x2009C094) #define FIO0PINU LPC17_REG16(0x2009C016) #define FIO1PINU LPC17_REG16(0x2009C036) #define FIO2PINU LPC17_REG16(0x2009C056) #define FIO3PINU LPC17_REG16(0x2009C076) #define FIO4PINU LPC17_REG16(0x2009C096) /* byte accessible FIOMASK registers */ #define FIO0MASK0 LPC17_REG8(0x2009C010) #define FIO1MASK0 LPC17_REG8(0x2009C030) #define FIO2MASK0 LPC17_REG8(0x2009C050) #define FIO3MASK0 LPC17_REG8(0x2009C070) #define FIO4MASK0 LPC17_REG8(0x2009C090) #define FIO0MASK1 LPC17_REG8(0x2009C011) #define FIO1MASK1 LPC17_REG8(0x2009C031) #define FIO2MASK1 LPC17_REG8(0x2009C051) #define FIO3MASK1 LPC17_REG8(0x2009C071) #define FIO4MASK1 LPC17_REG8(0x2009C091) #define FIO0MASK2 LPC17_REG8(0x2009C012) #define FIO1MASK2 LPC17_REG8(0x2009C032) #define FIO2MASK2 LPC17_REG8(0x2009C052) #define FIO3MASK2 LPC17_REG8(0x2009C072) #define FIO4MASK2 LPC17_REG8(0x2009C092) #define FIO0MASK3 LPC17_REG8(0x2009C013) #define FIO1MASK3 LPC17_REG8(0x2009C033) #define FIO2MASK3 LPC17_REG8(0x2009C053) #define FIO3MASK3 LPC17_REG8(0x2009C073) #define FIO4MASK3 LPC17_REG8(0x2009C093) /* half-word accessible FIOMASK registers */ #define FIO0MASKL LPC17_REG16(0x2009C010) #define FIO1MASKL LPC17_REG16(0x2009C030) #define FIO2MASKL LPC17_REG16(0x2009C050) #define FIO3MASKL LPC17_REG16(0x2009C070) #define FIO4MASKL LPC17_REG16(0x2009C090) #define FIO0MASKU LPC17_REG16(0x2009C012) #define FIO1MASKU LPC17_REG16(0x2009C032) #define FIO2MASKU LPC17_REG16(0x2009C052) #define FIO3MASKU LPC17_REG16(0x2009C072) #define FIO4MASKU LPC17_REG16(0x2009C092) /* GPIO overall Interrupt Status register (IOIntStatus - 0x4002 8080) */ #define IOIntStatus_P0Int (0x1 << 0) #define IOIntStatus_P2Int (0x1 << 2) /* * skipped: * * GPIO Interrupt Enable for port 0 Rising Edge (IO0IntEnR - 0x4002 8090) * GPIO Interrupt Enable for port 2 Rising Edge (IO2IntEnR - 0x4002 80B0) * GPIO Interrupt Enable for port 0 Falling Edge (IO0IntEnF - 0x4002 8094) * GPIO Interrupt Enable for port 2 Falling Edge (IO2IntEnF - 0x4002 80B4) * GPIO Interrupt Status for port 0 Rising Edge Interrupt (IO0IntStatR - 0x4002 8084) * GPIO Interrupt Status for port 2 Rising Edge Interrupt (IO2IntStatR - 0x4002 80A4) * GPIO Interrupt Status for port 0 Falling Edge Interrupt (IO0IntStatF - 0x4002 8088) * GPIO Interrupt Status for port 2 Falling Edge Interrupt (IO2IntStatF - 0x4002 80A8) * GPIO Interrupt Clear register for port 0 (IO0IntClr - 0x4002 808C) * GPIO Interrupt Clear register for port 0 (IO2IntClr - 0x4002 80AC) */ /* ethernet registers */ /* MAC registers */ #define MAC1 LPC17_REG(0x50000000) /* MAC configuration register 1 */ #define MAC2 LPC17_REG(0x50000004) /* MAC configuration register 2 */ #define IPGT LPC17_REG(0x50000008) /* Back-to-Back Inter-Packet-Gap register */ #define IPGR LPC17_REG(0x5000000C) /* Non Back-to-Back Inter-Packet-Gap register */ #define CLRT LPC17_REG(0x50000010) /* Collision window / Retry register */ #define MAXF LPC17_REG(0x50000014) /* Maximum Frame register */ #define SUPP LPC17_REG(0x50000018) /* PHY Support register */ #define TEST LPC17_REG(0x5000001C) /* Test register */ #define MCFG LPC17_REG(0x50000020) /* MII Mgmt Configuration register */ #define MCMD LPC17_REG(0x50000024) /* MII Mgmt Command register */ #define MADR LPC17_REG(0x50000028) /* MII Mgmt Address register */ #define MWTD LPC17_REG(0x5000002C) /* MII Mgmt Write Data register */ #define MRDD LPC17_REG(0x50000030) /* MII Mgmt Read Data register */ #define MIND LPC17_REG(0x50000034) /* MII Mgmt Indicators register */ #define SA0 LPC17_REG(0x50000040) /* Station Address 0 register */ #define SA1 LPC17_REG(0x50000044) /* Station Address 1 register */ #define SA2 LPC17_REG(0x50000048) /* Station Address 2 register */ /* Control registers */ #define Command LPC17_REG(0x50000100) /* Command register */ #define Status LPC17_REG(0x50000104) /* Status register */ #define RxDescriptor LPC17_REG(0x50000108) /* Receive descriptor base address register */ #define RxStatus LPC17_REG(0x5000010C) /* Receive status base address register */ #define RxDescriptorNumber LPC17_REG(0x50000110) /* Receive number of descriptors register */ #define RxProduceIndex LPC17_REG(0x50000114) /* Receive produce index register */ #define RxConsumeIndex LPC17_REG(0x50000118) /* Receive consume index register */ #define TxDescriptor LPC17_REG(0x5000011C) /* Transmit descriptor base address register */ #define TxStatus LPC17_REG(0x50000120) /* Transmit status base address register */ #define TxDescriptorNumber LPC17_REG(0x50000124) /* Transmit number of descriptors register */ #define TxProduceIndex LPC17_REG(0x50000128) /* Transmit produce index register */ #define TxConsumeIndex LPC17_REG(0x5000012C) /* Transmit consume index register */ #define TSV0 LPC17_REG(0x50000158) /* Transmit status vector 0 register */ #define TSV1 LPC17_REG(0x5000015C) /* Transmit status vector 1 register */ #define RSV LPC17_REG(0x50000160) /* Receive status vector register */ #define FlowControlCounter LPC17_REG(0x50000170) /* Flow control counter register */ #define FlowControlStatus LPC17_REG(0x50000170) /* Flow control status register */ /* Rx filter registers */ #define RxFliterCtrl LPC17_REG(0x50000200) /* Receive filter control register */ #define RxFilterWoLStatus LPC17_REG(0x50000204) /* Receive filter WoL status register */ #define RxFilterWoLClear LPC17_REG(0x50000208) /* Receive filter WoL clear register */ #define HashFilterL LPC17_REG(0x50000210) /* Hash filter table LSBs register */ #define HashFilterH LPC17_REG(0x50000214) /* Hash filter table MSBs register */ /* Module control registers */ #define IntStatus LPC17_REG(0x50000FE0) /* Interrupt status register */ #define IntEnable LPC17_REG(0x50000FE4) /* Interrupt enable register */ #define IntClear LPC17_REG(0x50000FE8) /* Interrupt clear register */ #define IntSet LPC17_REG(0x50000FEC) /* Interrupt set register */ #define PowerDown LPC17_REG(0x50000FF4) /* Power-down register */ /* MAC Configuration register 1 (MAC1 - 0x5000 0000) */ #define MAC1_RECEIVE_ENABLE (0x1 << 0) #define MAC1_PASS_ALL_RECEIVE_FRAMES (0x1 << 1) #define MAC1_RX_FLOW_CONTROL (0x1 << 2) #define MAC1_TX_FLOW_CONTROL (0x1 << 3) #define MAC1_LOOPBACK (0x1 << 4) #define MAC1_RESET_TX (0x1 << 8) #define MAC1_RESET_MCS_TX (0x1 << 9) #define MAC1_RESET_RX (0x1 << 10) #define MAC1_RESET_MCS_RX (0x1 << 11) #define MAC1_SIMULATION_RESET (0x1 << 14) #define MAC1_SOFT_RESET (0x1 << 15) /* MAC Configuration register 2 (MAC2 - 0x5000 0004) */ #define MAC2_FULL_DUPLEX (0x1 << 0) #define MAC2_FRAME_LENGTH_CHECKING (0x1 << 1) #define MAC2_HUGE_FRAME_ENABLE (0x1 << 2) #define MAC2_DELAYED_CRC (0x1 << 3) #define MAC2_CRC_ENABLE (0x1 << 4) #define MAC2_PAD_CRC_ENABLE (0x1 << 5) #define MAC2_VLAN_PAD_ENABLE (0x1 << 6) #define MAC2_AUTO_DETECT_PAD_ENABLE (0x1 << 7) #define MAC2_PURE_PREAMBLE_ENFORCEMENT (0x1 << 8) #define MAC2_LONG_PREAMBLE_ENFORCEMENT (0x1 << 9) #define MAC2_NO_BACKOFF (0x1 << 12) #define MAC2_BACK_PRESSURE_NO_BACKOFF (0x1 << 13) #define MAC2_EXCESS_DEFER (0x1 << 14) /* skipped Back-to-back Inter-packet-gap register (IPGT - 0x5000 0008) */ /* Non Back-to-back Inter-packet-gap register (IPGR - 0x5000 000C) */ #define IPGR_PART2 (0x7F << 0) #define IPGR_PART1 (0x7F << 8) /* Collision Window / Retry register (CLRT - 0x5000 0010) */ #define CLRT_RETRANSMISSION_MAXIMUM (0xF << 0) #define CLRT_COLLISION_WINDOW (0x3F << 8) /* skipped Maximum Frame register (MAXF - 0x5000 0014) */ /* PHY Support register (SUPP - 0x5000 0018) */ #define SUPP_SPEED (0x1 << 8) /* Test register (TEST - 0x5000 ) */ #define TEST_SHORTCUT_PAUSE_QUANTA (0x1 << 0) #define TEST_PAUSE (0x1 << 1) #define TEST_BACKPRESSURE (0x1 << 2) /* MII Mgmt Configuration register (MCFG - 0x5000 0020) */ #define MCFG_SCAN_INCREMENT (0x1 << 0) #define MCFG_SUPPRESS_PREAMBLE (0x1 << 1) #define MCFG_CLOCK_SELECT (0xF << 2) #define MCFG_RESET_MII_MGMT (0x1 << 15) /* MII Mgmt Command register (MCMD - 0x5000 0024) */ #define MCMD_READ (0x1 << 0) #define MCMD_SCAN (0x1 << 1) /* MII Mgmt Address register (MADR - 0x5000 0028) */ #define MADR_REGISTER_ADDRESS (0x1F << 0) #define MADR_PHY_ADDRESS (0x1F << 8) /* * skipped: * * MII Mgmt Write Data register (MWTD - 0x5000 002C) * MII Mgmt Read Data register (MRDD - 0x5000 0030) */ /* MII Mgmt Indicators register (MIND - 0x5000 0034) */ #define MIND_BUSY (0x1 << 0) #define MIND_SCANNING (0x1 << 1) #define MIND_NOT_VALID (0x1 << 2) #define MIND_MII_LINK_FAIL (0x1 << 3) /* Station Address register (SA0 - 0x5000 0040) */ #define SA0_OCTET2 (0xFF << 0) #define SA0_OCTET1 (0xFF << 8) /* Station Address register (SA1 - 0x5000 0044) */ #define SA1_OCTET4 (0xFF << 0) #define SA1_OCTET3 (0xFF << 8) /* Station Address register (SA2 - 0x5000 0048) */ #define SA2_OCTET6 (0xFF << 0) #define SA2_OCTET5 (0xFF << 8) /* Command register (Command - 0x5000 0100) */ #define Command_RxEnable (0x1 << 0) #define Command_TxEnable (0x1 << 1) #define Command_RegReset (0x1 << 3) #define Command_TxReset (0x1 << 4) #define Command_RxReset (0x1 << 5) #define Command_PassRuntFrame (0x1 << 6) #define Command_PassRxFilter (0x1 << 7) #define Command_TxFlowControl (0x1 << 8) #define Command_RMII (0x1 << 9) #define Command_FullDuplex (0x1 << 10) /* Status register (Status - 0x5000 0104) */ #define Status_RxStatus (0x1 << 0) #define Status_TxStatus (0x1 << 1) /* * skipped: * * Receive Descriptor Base Address register (RxDescriptor - 0x5000 0108) * Receive Status Base Address register (RxStatus - 0x5000 010C) * Receive Number of Descriptors register (RxDescriptor - 0x5000 0110) * Receive Produce Index register (RxProduceIndex - 0x5000 0114) * Receive Consume Index register (RxConsumeIndex - 0x5000 0118) * Transmit Descriptor Base Address register (TxDescriptor - 0x5000 011C) * Transmit Status Base Address register (TxStatus - 0x5000 0120) * Transmit Number of Descriptors register (TxDescriptorNumber - 0x5000 0124) * Transmit Produce Index register (TxProduceIndex - 0x5000 0128) * Transmit Consume Index register (TxConsumeIndex - 0x5000 012C) */ /* Transmit Status Vector 0 register (TSV0 - 0x5000 0158) */ #define TSV0_CRC_error (0x1 << 0) #define TSV0_Length_check_error (0x1 << 1) #define TSV0_Length_out_of_range (0x1 << 2) #define TSV0_Done (0x1 << 3) #define TSV0_Multicast (0x1 << 4) #define TSV0_Broadcast (0x1 << 5) #define TSV0_Packet_Defer (0x1 << 6) #define TSV0_Excessive_Defer (0x1 << 7) #define TSV0_Excessive_Collision (0x1 << 8) #define TSV0_Late_Collision (0x1 << 9) #define TSV0_Giant (0x1 << 10) #define TSV0_Underrun (0x1 << 11) #define TSV0_Total_bytes (0xFFFF << 12) #define TSV0_Control_frame (0x1 << 28) #define TSV0_Pause (0x1 << 29) #define TSV0_Backpressure (0x1 << 30) #define TSV0_VLAN (0x1 << 31) /* Transmit Status Vector 1 register (TSV1 - 0x5000 015C) */ #define TSV1_Transmit_byte_count (0xFFFF << 0) #define TSV1_Transmit_collision_count (0xF << 16) /* Receive Status Vector register (RSV - 0x5000 0160) */ #define RSV_Received_byte_count (0xFFFF << 0) #define RSV_Packet_previously_ignored (0x1 << 16) #define RSV_RXDV_event_previously_seen (0x1 << 17) #define RSV_Carrier_event_previously_seen (0x1 << 18) #define RSV_Receive_code_violation (0x1 << 19) #define RSV_CRC_error (0x1 << 20) #define RSV_Length_check_error (0x1 << 21) #define RSV_Length_out_of_range (0x1 << 22) #define RSV_Receive_OK (0x1 << 23) #define RSV_Multicast (0x1 << 24) #define RSV_Broadcast (0x1 << 25) #define RSV_Dribble_Nibble (0x1 << 26) #define RSV_Control_frame (0x1 << 27) #define RSV_PAUSE (0x1 << 28) #define RSV_Unsupported_Opcode (0x1 << 29) #define RSV_VLAN (0x1 << 30) /* Flow Control Counter register (FlowControlCounter - 0x5000 0170) */ #define FlowControlCounter_MirrorCounter (0xFFFF << 0) #define FlowControlCounter_PauseTimer (0xFFFF << 16) /* Flow Control Status register (FlowControlStatus - 0x5000 0174) */ #define FlowControlStatus_MirrorCounterCurrent (0xFFFF << 0) /* Receive Filter Control register (RxFilterCtrl - 0x5000 0200) */ #define RXFILTERCTRL_AcceptUnicastEn (0x1 << 0) #define RXFILTERCTRL_AcceptBroadcastEn (0x1 << 1) #define RXFILTERCTRL_AcceptMulticastEn (0x1 << 2) #define RXFILTERCTRL_AcceptUnicastHashEn (0x1 << 3) #define RXFILTERCTRL_AcceptMulticastHashEn (0x1 << 4) #define RXFILTERCTRL_AcceptPerfectEn (0x1 << 5) #define RXFILTERCTRL_MagicPacketEnWoL (0x1 << 12) #define RXFILTERCTRL_RxFilterEnWoL (0x1 << 13) /* Receive Filter WoL Status register (RxFilterWoLStatus - 0x5000 0204) */ #define RxFilterWoLStatus_AcceptUnicastWoL (0x1 << 0) #define RxFilterWoLStatus_AcceptBroadcastWoL (0x1 << 1) #define RxFilterWoLStatus_AcceptMulticastWoL (0x1 << 2) #define RxFilterWoLStatus_AcceptUnicastHashWoL (0x1 << 3) #define RxFilterWoLStatus_AcceptMulticastHashWoL (0x1 << 4) #define RxFilterWoLStatus_AcceptPerfectWoL (0x1 << 5) #define RxFilterWoLStatus_RxFilterWoL (0x1 << 7) #define RxFilterWoLStatus_MagicPacketWoL (0x1 << 8) /* Receive Filter WoL Clear register (RxFilterWoLClear - 0x5000 0208) */ #define RxFilterWoLClear_AcceptUnicastWoLClr (0x1 << 0) #define RxFilterWoLClear_AcceptBroadcastWoLClr (0x1 << 1) #define RxFilterWoLClear_AcceptMulticastWoLClr (0x1 << 2) #define RxFilterWoLClear_AcceptUnicastHashWoLClr (0x1 << 3) #define RxFilterWoLClear_AcceptMulticastHashWoLClr (0x1 << 4) #define RxFilterWoLClear_AcceptPerfectWoLClr (0x1 << 5) #define RxFilterWoLClear_RxFilterWoLClr (0x1 << 7) #define RxFilterWoLClear_MagicPacketWoLClr (0x1 << 6) /* * skipped: * * Hash Filter Table LSBs register (HashFilterL - 0x5000 0210) * Hash Filter MSBs register (HashFilterH - 0x5000 0214) */ /* Interrupt Status register (IntStatus - 0x5000 0FE0) */ #define IntStatus_RxOverrunInt (0x1 << 0) #define IntStatus_RxErrorInt (0x1 << 1) #define IntStatus_RxFinishedInt (0x1 << 2) #define IntStatus_RxDoneInt (0x1 << 3) #define IntStatus_TxUnderrunInt (0x1 << 4) #define IntStatus_TxErrorInt (0x1 << 5) #define IntStatus_TxFinishedInt (0x1 << 6) #define IntStatus_TxDoneInt (0x1 << 7) #define IntStatus_SoftInt (0x1 << 12) #define IntStatus_WakeupInt (0x1 << 13) /* Interrupt Enable register (intEnable - 0x5000 0FE4) */ #define IntEnable_RxOverrunIntEn (0x1 << 0) #define IntEnable_RxErrorIntEn (0x1 << 1) #define IntEnable_RxFinishedIntEn (0x1 << 2) #define IntEnable_RxDoneIntEn (0x1 << 3) #define IntEnable_TxUnderrunIntEn (0x1 << 4) #define IntEnable_TxErrorIntEn (0x1 << 5) #define IntEnable_TxFinishedIntEn (0x1 << 6) #define IntEnable_TxDoneIntEn (0x1 << 7) #define IntEnable_SoftIntEn (0x1 << 12) #define IntEnable_WakeupIntEn (0x1 << 13) /* Interrupt Clear register (IntClear - 0x5000 0FE8) */ #define IntClear_RxOverrunIntClr (0x1 << 0) #define IntClear_RxErrorIntClr (0x1 << 1) #define IntClear_RxFinishedIntClr (0x1 << 2) #define IntClear_RxDoneIntClr (0x1 << 3) #define IntClear_TxUnderrunIntClr (0x1 << 4) #define IntClear_TxErrorIntClr (0x1 << 5) #define IntClear_TxFinishedIntClr (0x1 << 6) #define IntClear_TxDoneIntClr (0x1 << 7) #define IntClear_SoftIntClr (0x1 << 12) #define IntClear_WakeupIntClr (0x1 << 13) /* Interrupt Set register (IntSet - 0x5000 0FEC) */ #define IntSet_RxOverrunIntSet (0x1 << 0) #define IntSet_RxErrorIntSet (0x1 << 1) #define IntSet_RxFinishedIntSet (0x1 << 2) #define IntSet_RxDoneIntSet (0x1 << 3) #define IntSet_TxUnderrunIntSet (0x1 << 4) #define IntSet_TxErrorIntSet (0x1 << 5) #define IntSet_TxFinishedIntSet (0x1 << 6) #define IntSet_TxDoneIntSet (0x1 << 7) #define IntSet_SoftIntSet (0x1 << 12) #define IntSet_WakeupIntSet (0x1 << 13) /* Power-Down register (PowerDown - 0x5000 0FF4) */ #define PowerDown_PowerDownMACAHB (0x1 << 31) /* USB device registers */ /* Clock control registers */ #define USBClkCtrl LPC17_REG(0x5000CFF4) /* USB Clock Control */ #define USBClkSt LPC17_REG(0x5000CFF8) /* USB Clock Status */ /* Device interrupt registers */ #define USBIntSt LPC17_REG(0x400FC1C0) /* USB Interrupt Status */ #define USBDevIntSt LPC17_REG(0x5000C200) /* USB Device Interrupt Status */ #define USBDevIntEn LPC17_REG(0x5000C204) /* USB Device Interrupt Enable */ #define USBDevIntClr LPC17_REG(0x5000C208) /* USB Device Interrupt Clear */ #define USBDevIntSet LPC17_REG(0x5000C20C) /* USB Device Interrupt Set */ #define USBDevIntPri LPC17_REG(0x5000C22C) /* USB Device Interrupt Priority */ /* Endpoint interrupt registers */ #define USBEpIntSt LPC17_REG(0x5000C230) /* USB Endpoint Interrupt Status */ #define USBEpIntEn LPC17_REG(0x5000C234) /* USB Endpoint Interrupt Enable */ #define USBEpIntClr LPC17_REG(0x5000C238) /* USB Endpoint Interrupt Clear */ #define USBEpIntSet LPC17_REG(0x5000C23C) /* USB Endpoint Interrupt Set */ #define USBEpIntPri LPC17_REG(0x5000C240) /* USB Endpoint Priority */ /* Endpoint realization registers */ #define USBReEp LPC17_REG(0x5000C244) /* USB Realize Endpoint */ #define USBEpIn LPC17_REG(0x5000C248) /* USB Endpoint Index */ #define USBMaxPSize LPC17_REG(0x5000C24C) /* USB MaxPacketSize */ /* USB transfer registers */ #define USBRxData LPC17_REG(0x5000C218) /* USB Receive Data */ #define USBRxPLen LPC17_REG(0x5000C220) /* USB Receive Packet Length */ #define USBTxData LPC17_REG(0x5000C21C) /* USB Transmit Data */ #define USBTxPLen LPC17_REG(0x5000C224) /* USB Transmit Packet Length */ #define USBCtrl LPC17_REG(0x5000C228) /* USB Control */ /* SIE Command registers */ #define USBCmdCode LPC17_REG(0x5000C210) /* USB Command Code */ #define USBCmdData LPC17_REG(0x5000C214) /* USB Command Data */ /* DMA registers */ #define USBDMARSt LPC17_REG(0x5000C250) /* USB DMA Request Status */ #define USBDMARClr LPC17_REG(0x5000C254) /* USB DMA Request Clear */ #define USBDMARSet LPC17_REG(0x5000C258) /* USB DMA Request Set */ #define USBUDCAH LPC17_REG(0x5000C280) /* USB UDCA Head */ #define USBEpDMASt LPC17_REG(0x5000C284) /* USB Endpoint DMA Status */ #define USBEpDMAEn LPC17_REG(0x5000C288) /* USB Endpoint DMA Enable */ #define USBEpDMADis LPC17_REG(0x5000C28C) /* USB Endpoint DMA Disable */ #define USBDMAIntSt LPC17_REG(0x5000C290) /* USB DMA Interrupt Status */ #define USBDMAIntEn LPC17_REG(0x5000C294) /* USB DMA Interrupt Enable */ #define USBEoTIntSt LPC17_REG(0x5000C2A0) /* USB End of Transfer Interrupt Status */ #define USBEoTIntClr LPC17_REG(0x5000C2A4) /* USB End of Transfer Interrupt Clear */ #define USBEoTIntSet LPC17_REG(0x5000C2A8) /* USB End of Transfer Interrupt Set */ #define USBNDDRIntSt LPC17_REG(0x5000C2AC) /* USB New DD Request Interrupt Status */ #define USBNDDRIntClr LPC17_REG(0x5000C2B0) /* USB New DD Request Interrupt Clear */ #define USBNDDRIntSet LPC17_REG(0x5000C2B4) /* USB New DD Request Interrupt Set */ #define USBSysErrIntSt LPC17_REG(0x5000C2B8) /* USB System Error Interrupt Status */ #define USBSysErrIntClr LPC17_REG(0x5000C2BC) /* USB System Error Interrupt Clear */ #define USBSysErrIntSet LPC17_REG(0x5000C2C0) /* USB System Error Interrupt Set */ /* USBClkCtrl register (USBClkCtrl - 0x5000 CFF4) */ #define USBClkCtrl_DEV_CLK_EN (0x1 << 1) #define USBClkCtrl_AHB_CLK_EN (0x1 << 4) /* USB Clock Status register (USBClkSt - 0x5000 CFF8) */ #define USBClkSt_DEV_CLK_ON (0x1 << 1) #define USBClkSt_AHB_CLK_ON (0x1 << 4) /* USB Interrupt Status register (USBIntSt - 0x5000 C1C0) */ #define USBIntSt_USB_INT_REQ_LP (0x1 << 0) #define USBIntSt_USB_INT_REQ_HP (0x1 << 1) #define USBIntSt_USB_INT_REQ_DMA (0x1 << 2) #define USBIntSt_USB_NEED_CLK (0x1 << 8) #define USBIntSt_EN_USB_INTS (0x1 << 31) /* USB Device Interrupt Status register (USBDevIntSt - 0x5000 C200) */ #define USBDevIntSt_FRAME (0x1 << 0) #define USBDevIntSt_EP_FAST (0x1 << 1) #define USBDevIntSt_EP_SLOW (0x1 << 2) #define USBDevIntSt_DEV_STAT (0x1 << 3) #define USBDevIntSt_CCEMPTY (0x1 << 4) #define USBDevIntSt_CDFULL (0x1 << 5) #define USBDevIntSt_RxENDPKT (0x1 << 6) #define USBDevIntSt_TxENDPKT (0x1 << 7) #define USBDevIntSt_EP_RLZED (0x1 << 8) #define USBDevIntSt_ERR_INT (0x1 << 9) /* USB Device Interrupt Enable register (USBDevIntEn - 0x5000 C204) */ #define USBDevIntEn_FRAME (0x1 << 0) #define USBDevIntEn_EP_FAST (0x1 << 1) #define USBDevIntEn_EP_SLOW (0x1 << 2) #define USBDevIntEn_DEV_STAT (0x1 << 3) #define USBDevIntEn_CCEMPTY (0x1 << 4) #define USBDevIntEn_CDFULL (0x1 << 5) #define USBDevIntEn_RxENDPKT (0x1 << 6) #define USBDevIntEn_TxENDPKT (0x1 << 7) #define USBDevIntEn_EP_RLZED (0x1 << 8) #define USBDevIntEn_ERR_INT (0x1 << 9) /* USB Device Interrupt Clear register (USBDevIntClr - 0x5000 C208) */ #define USBDevIntClr_FRAME (0x1 << 0) #define USBDevIntClr_EP_FAST (0x1 << 1) #define USBDevIntClr_EP_SLOW (0x1 << 2) #define USBDevIntClr_DEV_STAT (0x1 << 3) #define USBDevIntClr_CCEMPTY (0x1 << 4) #define USBDevIntClr_CDFULL (0x1 << 5) #define USBDevIntClr_RxENDPKT (0x1 << 6) #define USBDevIntClr_TxENDPKT (0x1 << 7) #define USBDevIntClr_EP_RLZED (0x1 << 8) #define USBDevIntClr_ERR_INT (0x1 << 9) /* USB Device Interrupt Set register (USBDevIntSet - 0x5000 C20C) */ #define USBDevIntSet_FRAME (0x1 << 0) #define USBDevIntSet_EP_FAST (0x1 << 1) #define USBDevIntSet_EP_SLOW (0x1 << 2) #define USBDevIntSet_DEV_STAT (0x1 << 3) #define USBDevIntSet_CCEMPTY (0x1 << 4) #define USBDevIntSet_CDFULL (0x1 << 5) #define USBDevIntSet_RxENDPKT (0x1 << 6) #define USBDevIntSet_TxENDPKT (0x1 << 7) #define USBDevIntSet_EP_RLZED (0x1 << 8) #define USBDevIntSet_ERR_INT (0x1 << 9) /* USB Device Interrupt Priority register (USBDevIntPri - 0x5000 C22C) */ #define USBDevIntPri_FRAME (0x1 << 0) #define USBDevIntPri_EP_FAST (0x1 << 1) /* USB Endpoint Interrupt Status register (USBEpIntSt - 0x5000 C230) */ #define USBEpIntSt_EP0RX (0x1 << 0) #define USBEpIntSt_EP0TX (0x1 << 1) #define USBEpIntSt_EP1RX (0x1 << 2) #define USBEpIntSt_EP1TX (0x1 << 3) #define USBEpIntSt_EP2RX (0x1 << 4) #define USBEpIntSt_EP2TX (0x1 << 5) #define USBEpIntSt_EP3RX (0x1 << 6) #define USBEpIntSt_EP3TX (0x1 << 7) #define USBEpIntSt_EP4RX (0x1 << 8) #define USBEpIntSt_EP4TX (0x1 << 9) #define USBEpIntSt_EP5RX (0x1 << 10) #define USBEpIntSt_EP5TX (0x1 << 11) #define USBEpIntSt_EP6RX (0x1 << 12) #define USBEpIntSt_EP6TX (0x1 << 13) #define USBEpIntSt_EP7RX (0x1 << 14) #define USBEpIntSt_EP7TX (0x1 << 15) #define USBEpIntSt_EP8RX (0x1 << 16) #define USBEpIntSt_EP8TX (0x1 << 17) #define USBEpIntSt_EP9RX (0x1 << 18) #define USBEpIntSt_EP9TX (0x1 << 19) #define USBEpIntSt_EP10RX (0x1 << 20) #define USBEpIntSt_EP10TX (0x1 << 21) #define USBEpIntSt_EP11RX (0x1 << 22) #define USBEpIntSt_EP11TX (0x1 << 23) #define USBEpIntSt_EP12RX (0x1 << 24) #define USBEpIntSt_EP12TX (0x1 << 25) #define USBEpIntSt_EP13RX (0x1 << 26) #define USBEpIntSt_EP13TX (0x1 << 27) #define USBEpIntSt_EP14RX (0x1 << 28) #define USBEpIntSt_EP14TX (0x1 << 29) #define USBEpIntSt_EP15RX (0x1 << 30) #define USBEpIntSt_EP15TX (0x1 << 31) /* USB Endpoint Interrupt Enable register (USBEpIntEn - 0x5000 C234) */ #define USBEpIntEn_EP0RX (0x1 << 0) #define USBEpIntEn_EP0TX (0x1 << 1) #define USBEpIntEn_EP1RX (0x1 << 2) #define USBEpIntEn_EP1TX (0x1 << 3) #define USBEpIntEn_EP2RX (0x1 << 4) #define USBEpIntEn_EP2TX (0x1 << 5) #define USBEpIntEn_EP3RX (0x1 << 6) #define USBEpIntEn_EP3TX (0x1 << 7) #define USBEpIntEn_EP4RX (0x1 << 8) #define USBEpIntEn_EP4TX (0x1 << 9) #define USBEpIntEn_EP5RX (0x1 << 10) #define USBEpIntEn_EP5TX (0x1 << 11) #define USBEpIntEn_EP6RX (0x1 << 12) #define USBEpIntEn_EP6TX (0x1 << 13) #define USBEpIntEn_EP7RX (0x1 << 14) #define USBEpIntEn_EP7TX (0x1 << 15) #define USBEpIntEn_EP8RX (0x1 << 16) #define USBEpIntEn_EP8TX (0x1 << 17) #define USBEpIntEn_EP9RX (0x1 << 18) #define USBEpIntEn_EP9TX (0x1 << 19) #define USBEpIntEn_EP10RX (0x1 << 20) #define USBEpIntEn_EP10TX (0x1 << 21) #define USBEpIntEn_EP11RX (0x1 << 22) #define USBEpIntEn_EP11TX (0x1 << 23) #define USBEpIntEn_EP12RX (0x1 << 24) #define USBEpIntEn_EP12TX (0x1 << 25) #define USBEpIntEn_EP13RX (0x1 << 26) #define USBEpIntEn_EP13TX (0x1 << 27) #define USBEpIntEn_EP14RX (0x1 << 28) #define USBEpIntEn_EP14TX (0x1 << 29) #define USBEpIntEn_EP15RX (0x1 << 30) #define USBEpIntEn_EP15TX (0x1 << 31) /* USB Endpoint Interrupt Clear register (USBEpIntClr - 0x5000 C238) */ #define USBEpIntClr_EP0RX (0x1 << 0) #define USBEpIntClr_EP0TX (0x1 << 1) #define USBEpIntClr_EP1RX (0x1 << 2) #define USBEpIntClr_EP1TX (0x1 << 3) #define USBEpIntClr_EP2RX (0x1 << 4) #define USBEpIntClr_EP2TX (0x1 << 5) #define USBEpIntClr_EP3RX (0x1 << 6) #define USBEpIntClr_EP3TX (0x1 << 7) #define USBEpIntClr_EP4RX (0x1 << 8) #define USBEpIntClr_EP4TX (0x1 << 9) #define USBEpIntClr_EP5RX (0x1 << 10) #define USBEpIntClr_EP5TX (0x1 << 11) #define USBEpIntClr_EP6RX (0x1 << 12) #define USBEpIntClr_EP6TX (0x1 << 13) #define USBEpIntClr_EP7RX (0x1 << 14) #define USBEpIntClr_EP7TX (0x1 << 15) #define USBEpIntClr_EP8RX (0x1 << 16) #define USBEpIntClr_EP8TX (0x1 << 17) #define USBEpIntClr_EP9RX (0x1 << 18) #define USBEpIntClr_EP9TX (0x1 << 19) #define USBEpIntClr_EP10RX (0x1 << 20) #define USBEpIntClr_EP10TX (0x1 << 21) #define USBEpIntClr_EP11RX (0x1 << 22) #define USBEpIntClr_EP11TX (0x1 << 23) #define USBEpIntClr_EP12RX (0x1 << 24) #define USBEpIntClr_EP12TX (0x1 << 25) #define USBEpIntClr_EP13RX (0x1 << 26) #define USBEpIntClr_EP13TX (0x1 << 27) #define USBEpIntClr_EP14RX (0x1 << 28) #define USBEpIntClr_EP14TX (0x1 << 29) #define USBEpIntClr_EP15RX (0x1 << 30) #define USBEpIntClr_EP15TX (0x1 << 31) /* USB Endpoint Interrupt Set register (USBEpIntSet - 0x5000 C23C) */ #define USBEpIntSet_EP0RX (0x1 << 0) #define USBEpIntSet_EP0TX (0x1 << 1) #define USBEpIntSet_EP1RX (0x1 << 2) #define USBEpIntSet_EP1TX (0x1 << 3) #define USBEpIntSet_EP2RX (0x1 << 4) #define USBEpIntSet_EP2TX (0x1 << 5) #define USBEpIntSet_EP3RX (0x1 << 6) #define USBEpIntSet_EP3TX (0x1 << 7) #define USBEpIntSet_EP4RX (0x1 << 8) #define USBEpIntSet_EP4TX (0x1 << 9) #define USBEpIntSet_EP5RX (0x1 << 10) #define USBEpIntSet_EP5TX (0x1 << 11) #define USBEpIntSet_EP6RX (0x1 << 12) #define USBEpIntSet_EP6TX (0x1 << 13) #define USBEpIntSet_EP7RX (0x1 << 14) #define USBEpIntSet_EP7TX (0x1 << 15) #define USBEpIntSet_EP8RX (0x1 << 16) #define USBEpIntSet_EP8TX (0x1 << 17) #define USBEpIntSet_EP9RX (0x1 << 18) #define USBEpIntSet_EP9TX (0x1 << 19) #define USBEpIntSet_EP10RX (0x1 << 20) #define USBEpIntSet_EP10TX (0x1 << 21) #define USBEpIntSet_EP11RX (0x1 << 22) #define USBEpIntSet_EP11TX (0x1 << 23) #define USBEpIntSet_EP12RX (0x1 << 24) #define USBEpIntSet_EP12TX (0x1 << 25) #define USBEpIntSet_EP13RX (0x1 << 26) #define USBEpIntSet_EP13TX (0x1 << 27) #define USBEpIntSet_EP14RX (0x1 << 28) #define USBEpIntSet_EP14TX (0x1 << 29) #define USBEpIntSet_EP15RX (0x1 << 30) #define USBEpIntSet_EP15TX (0x1 << 31) /* USB Endpoint Interrupt Priority register (USBEpIntPri - 0x5000 C240) */ #define USBEpIntPri_EP0RX (0x1 << 0) #define USBEpIntPri_EP0TX (0x1 << 1) #define USBEpIntPri_EP1RX (0x1 << 2) #define USBEpIntPri_EP1TX (0x1 << 3) #define USBEpIntPri_EP2RX (0x1 << 4) #define USBEpIntPri_EP2TX (0x1 << 5) #define USBEpIntPri_EP3RX (0x1 << 6) #define USBEpIntPri_EP3TX (0x1 << 7) #define USBEpIntPri_EP4RX (0x1 << 8) #define USBEpIntPri_EP4TX (0x1 << 9) #define USBEpIntPri_EP5RX (0x1 << 10) #define USBEpIntPri_EP5TX (0x1 << 11) #define USBEpIntPri_EP6RX (0x1 << 12) #define USBEpIntPri_EP6TX (0x1 << 13) #define USBEpIntPri_EP7RX (0x1 << 14) #define USBEpIntPri_EP7TX (0x1 << 15) #define USBEpIntPri_EP8RX (0x1 << 16) #define USBEpIntPri_EP8TX (0x1 << 17) #define USBEpIntPri_EP9RX (0x1 << 18) #define USBEpIntPri_EP9TX (0x1 << 19) #define USBEpIntPri_EP10RX (0x1 << 20) #define USBEpIntPri_EP10TX (0x1 << 21) #define USBEpIntPri_EP11RX (0x1 << 22) #define USBEpIntPri_EP11TX (0x1 << 23) #define USBEpIntPri_EP12RX (0x1 << 24) #define USBEpIntPri_EP12TX (0x1 << 25) #define USBEpIntPri_EP13RX (0x1 << 26) #define USBEpIntPri_EP13TX (0x1 << 27) #define USBEpIntPri_EP14RX (0x1 << 28) #define USBEpIntPri_EP14TX (0x1 << 29) #define USBEpIntPri_EP15RX (0x1 << 30) #define USBEpIntPri_EP15TX (0x1 << 31) /* skipped USB Realize Endpoint register (USBReEp - 0x5000 C244) */ /* USB Endpoint Index register (USBEpIn - 0x5000 C248) */ #define USBEpIn_PHY_EP (0x1F << 0) /* * skipped: * * USB MaxPacketSize register (USBMaxPSize - 0x5000 C24C) * USB Receive Data register (USBRxData - 0x5000 C218) */ /* USB Receive Packet Length register (USBRxPlen - 0x5000 C220) */ #define USBRxPLen_PKT_LNGTH (0x3FF << 0) #define USBRxPLen_DV (0x1 << 10) #define USBRxPLen_PKT_RDY (0x1 << 11) /* * skipped: * * USB Transmit Data register (USBTxData - 0x5000 C21C) * USB Transmit Packet Length register (USBTxPLen - 0x5000 C224) */ /* USB Control register (USBCtrl - 0x5000 C228) */ #define USBCtrl_RD_EN (0x1 << 0) #define USBCtrl_WR_EN (0x1 << 1) #define USBCtrl_LOG_ENDPOINT (0xF << 2) /* USB Command Code register (USBCmdCode - 0x5000 C210) */ #define USBCmdCode_CMD_PHASE (0xFF << 8) #define USBCmdCode_CMD_CODE_CMD_WDATA (0xFF << 16) /* * skipped: * * USB Command Data register (USBCmdData - 0x5000 C214) * USB DMA Request Status register (USBDMARSt - 0x5000 C250) * USB DMA Request Clear register (USBDMARClr - 0x5000 C254) * USB DMA Request Set register (USBDMARSet - 0x5000 C258) * USB UDCA Head register (USBUDCAH - 0x5000 C280) * USB EP DMA Status register (USBEpDMASt - 0x5000 C284) * USB EP DMA Enable register (USBEpDMAEn - 0x5000 C288) * USB EP DMA Disable register (USBEpDMADis - 0x5000 C28C) */ /* USB DMA Interrupt Status register (USBDMAIntSt - 0x5000 C290) */ #define USBDMAIntSt_EOT (0x1 << 0) #define USBDMAIntSt_NDDR (0x1 << 1) #define USBDMAIntSt_ERR (0x1 << 2) /* USB DMA Interrupt Enable register (USBDMAIntEn - 0x5000 C294) */ #define USBDMAIntEn_EOT (0x1 << 0) #define USBDMAIntEn_NDDR (0x1 << 1) #define USBDMAIntEn_ERR (0x1 << 2) /* * skipped: * * USB End of Transfer Interrupt Status register (USBEoTIntSt - 0x5000 C2A0s) * USB End of Transfer Interrupt Clear register (USBEoTIntClr - 0x5000 C2A4) * USB End of Transfer Interrupt Set register (USBEoTIntSet - 0x5000 C2A8) * USB New DD Request Interrupt Status register (USBNDDRIntSt - 0x5000 C2AC) * USB New DD Request Interrupt Clear register (USBNDDRIntClr - 0x5000 C2B0) * USB New DD Request Interrupt Set register (USBNDDRIntSet - 0x5000 C2B4) * USB System Error Interrupt Status register (USBSysErrIntSt - 0x5000 C2B8) * USB System Error Interrupt Clear register (USBSysErrIntClr - 0x5000 C2BC) * USB System Error Interrupt Set register (USBSysErrIntSet - 0x5000 C2C0) */ /* USB host registers */ #define HcRevision LPC17_REG(0x5000C000) #define HcControl LPC17_REG(0x5000C004) #define HcCommandStatus LPC17_REG(0x5000C008) #define HcInterruptStatus LPC17_REG(0x5000C00C) #define HcInterruptEnable LPC17_REG(0x5000C010) #define HcInterruptDisable LPC17_REG(0x5000C014) #define HcHCCA LPC17_REG(0x5000C018) #define HcPeriodCurrentED LPC17_REG(0x5000C01C) #define HcControlHeadED LPC17_REG(0x5000C020) #define HcControlCurrentED LPC17_REG(0x5000C024) #define HcBulkHeadED LPC17_REG(0x5000C028) #define HcBulkCurrentED LPC17_REG(0x5000C02C) #define HcDoneHead LPC17_REG(0x5000C030) #define HcFmInterval LPC17_REG(0x5000C034) #define HcFmRemaining LPC17_REG(0x5000C038) #define HcFmNumber LPC17_REG(0x5000C03C) #define HcPeriodicStart LPC17_REG(0x5000C040) #define HcLSThreshold LPC17_REG(0x5000C044) #define HcRhDescriptorA LPC17_REG(0x5000C048) #define HcRhDescriptorB LPC17_REG(0x5000C04C) #define HcRhStatus LPC17_REG(0x5000C050) #define HcRhPortStatus1 LPC17_REG(0x5000C054) #define HcRhPortStatus2 LPC17_REG(0x5000C058) #define Module_ID_Ver_Rev_ID LPC17_REG(0x5000C0FC) /* USB OTG and I2C registers */ /* Interrupt register */ #define USBIntSt LPC17_REG(0x400FC1C0) /* USB Interrupt Status */ /* OTG registers */ #define OTGIntSt LPC17_REG(0x5000C100) /* OTG Interrupt Status */ #define OTGIntEn LPC17_REG(0x5000C104) /* OTG Interrupt Enable */ #define OTGIntSet LPC17_REG(0x5000C108) /* OTG Interrupt Set */ #define OTGIntClr LPC17_REG(0x5000C10C) /* OTG Interrupt Clear */ #define OTGStCtrl LPC17_REG(0x5000C110) /* OTG Status and Control */ #define OTGTmr LPC17_REG(0x5000C114) /* OTG Timer */ /* I2C registers */ #define I2C_RX LPC17_REG(0x5000C300) /* I2C Receive */ #define I2C_TX LPC17_REG(0x5000C300) /* I2C Transmit */ #define I2C_STS LPC17_REG(0x5000C304) /* I2C Status */ #define I2C_CTL LPC17_REG(0x5000C308) /* I2C Control */ #define I2C_CLKHI LPC17_REG(0x5000C30C) /* I2C Clock High */ #define I2C_CLKLO LPC17_REG(0x5000C310) /* I2C Clock Low */ /* Clock control registers */ #define OTGClkCtrl LPC17_REG(0x5000CFF4) /* OTG clock controller */ #define OTGClkSt LPC17_REG(0x5000CFF8) /* OTG clock status */ /* USB Interrupt Status register - (USBIntSt - 0x5000 C1C0) */ #define USBIntSt_USB_INT_REQ_LP (0x1 << 0) #define USBIntSt_USB_INT_REQ_HP (0x1 << 1) #define USBIntSt_USB_INT_REQ_DMA (0x1 << 2) #define USBIntSt_USB_HOST_INT (0x1 << 3) #define USBIntSt_USB_ATX_INT (0x1 << 4) #define USBIntSt_USB_OTG_INT (0x1 << 5) #define USBIntSt_USB_I2C_INT (0x1 << 6) #define USBIntSt_USB_NEED_CLK (0x1 << 8) #define USBIntSt_EN_USB_INTS (0x1 << 31) /* OTG Interrupt Status register (OTGIntSt - 0x5000 C100) */ #define OTGIntSt_TMR (0x1 << 0) #define OTGIntSt_REMOVE_PU (0x1 << 1) #define OTGIntSt_HNP_FAILURE (0x1 << 2) #define OTGIntSt_HNP_SUCCESS (0x1 << 3) /* OTG Interrupt Enable Register (OTGIntEn - 0x5000 C104) */ #define OTGIntEn_TMR (0x1 << 0) #define OTGIntEn_REMOVE_PU (0x1 << 1) #define OTGIntEn_HNP_FAILURE (0x1 << 2) #define OTGIntEn_HNP_SUCCESS (0x1 << 3) /* OTG Interrupt Set Register (OTGIntSet - 0x5000 C20C) */ #define OTGIntSet_TMR (0x1 << 0) #define OTGIntSet_REMOVE_PU (0x1 << 1) #define OTGIntSet_HNP_FAILURE (0x1 << 2) #define OTGIntSet_HNP_SUCCESS (0x1 << 3) /* OTG Interrupt Clear Register (OTGIntClr - 0x5000 C10C) */ #define OTGIntClr_TMR (0x1 << 0) #define OTGIntClr_REMOVE_PU (0x1 << 1) #define OTGIntClr_HNP_FAILURE (0x1 << 2) #define OTGIntClr_HNP_SUCCESS (0x1 << 3) /* OTG Status and Control Register (OTGStCtrl - 0x5000 C110) */ #define OTGStCtrl_PORT_FUNC (0x3 << 0) #define OTGStCtrl_TMR_SCALE (0x3 << 2) #define OTGStCtrl_TMR_MODE (0x1 << 4) #define OTGStCtrl_TMR_EN (0x1 << 5) #define OTGStCtrl_TMR_RST (0x1 << 6) #define OTGStCtrl_B_HNP_TRACK (0x1 << 8) #define OTGStCtrl_A_HNP_TRACK (0x1 << 9) #define OTGStCtrl_PU_REMOVED (0x1 << 10) #define OTGStCtrl_TMR_CNT (0xFFFF << 16) /* OTG Timer Register (OTGTmr - 0x5000 C114) */ #define OTGTmr_TIMEOUT_CNT (0xFFFF << 0) /* OTG Clock Control Register (OTGClkCtrl - 0x5000 CFF4) */ #define OTGClkCtrl_HOST_CLK_EN (0x1 << 0) #define OTGClkCtrl_DEV_CLK_EN (0x1 << 1) #define OTGClkCtrl_I2C_CLK_EN (0x1 << 2) #define OTGClkCtrl_OTG_CLK_EN (0x1 << 3) #define OTGClkCtrl_AHB_CLK_EN (0x1 << 4) /* OTG Clock Status Register (OTGClkSt - 0x5000 CFF8) */ #define OTGClkSt_HOST_CLK_ON (0x1 << 0) #define OTGClkSt_DEV_CLK_ON (0x1 << 1) #define OTGClkSt_I2C_CLK_ON (0x1 << 2) #define OTGClkSt_OTG_CLK_ON (0x1 << 3) #define OTGClkSt_AHB_CLK_ON (0x1 << 4) /* skipped I2C Receive Register (I2C_RX - 0x5000 C300) */ /* I2C Transmit register (I2C_TX - 0x5000 C300) */ #define I2C_TX_TX_Data (0xFF << 0) #define I2C_TX_START (0x1 << 8) #define I2C_TX_STOP (0x1 << 9) /* I2C Status Register (I2C_STS - 0x5000 C304) */ #define I2C_STS_TDI (0x1 << 0) #define I2C_STS_AFI (0x1 << 1) #define I2C_STS_NAI (0x1 << 2) #define I2C_STS_DRM (0x1 << 3) #define I2C_STS_DRSI (0x1 << 4) #define I2C_STS_Activ (0x1 << 5) #define I2C_STS_SCL (0x1 << 6) #define I2C_STS_SDA (0x1 << 7) #define I2C_STS_RFF (0x1 << 8) #define I2C_STS_RFE (0x1 << 9) #define I2C_STS_TFF (0x1 << 10) #define I2C_STS_TFE (0x1 << 11) /* I2C Control Register (I2C_CTL - 0x5000 C308) */ #define I2C_CTL_TDIE (0x1 << 0) #define I2C_CTL_AFIE (0x1 << 1) #define I2C_CTL_NAIE (0x1 << 2) #define I2C_CTL_DRMIE (0x1 << 3) #define I2C_CTL_DRSIE (0x1 << 4) #define I2C_CTL_REFIE (0x1 << 5) #define I2C_CTL_RFDAIE (0x1 << 6) #define I2C_CTL_TFFIE (0x1 << 7) #define I2C_CTL_SRST (0x1 << 8) /* * skipped: * * I2C Clock High Register (I2C_CLKHI - 0x5000 C30C) * I2C Clock Low Register (I2C_CLKLO - 0x5000 C310)5 */ /* UART 0/2/3 registers */ /* UART 0 */ #define U0RBR LPC17_REG(0x4000C000) /* Receiver Buffer Register */ #define U0THR LPC17_REG(0x4000C000) /* Transmit Holding Register */ #define U0DLL LPC17_REG(0x4000C000) /* Divisor Latch LSB */ #define U0DLM LPC17_REG(0x4000C004) /* Divisor Latch MSB */ #define U0IER LPC17_REG(0x4000C004) /* Interrupt Enable Register */ #define U0IIR LPC17_REG(0x4000C008) /* Interrupt ID Register */ #define U0FCR LPC17_REG(0x4000C008) /* FIFO Control Register */ #define U0LCR LPC17_REG(0x4000C00C) /* Line Control Register */ #define U0LSR LPC17_REG(0x4000C014) /* Line Status Register */ #define U0SCR LPC17_REG(0x4000C01C) /* Scratch Pad Register */ #define U0ACR LPC17_REG(0x4000C020) /* Auto-baud Control Register */ #define U0ICR LPC17_REG(0x4000C024) /* IrDA Control Register */ #define U0FDR LPC17_REG(0x4000C028) /* Fractional Divider Register */ #define U0TER LPC17_REG(0x4000C030) /* Transmit Enable Register */ /* UART 2 */ #define U2RBR LPC17_REG(0x40098000) /* Receiver Buffer Register */ #define U2THR LPC17_REG(0x40098000) /* Transmit Holding Register */ #define U2DLL LPC17_REG(0x40098000) /* Divisor Latch LSB */ #define U2DLM LPC17_REG(0x40098004) /* Divisor Latch MSB */ #define U2IER LPC17_REG(0x40098004) /* Interrupt Enable Register */ #define U2IIR LPC17_REG(0x40098008) /* Interrupt ID Register */ #define U2FCR LPC17_REG(0x40098008) /* FIFO Control Register */ #define U2LCR LPC17_REG(0x4009800C) /* Line Control Register */ #define U2LSR LPC17_REG(0x40098014) /* Line Status Register */ #define U2SCR LPC17_REG(0x4009801C) /* Scratch Pad Register */ #define U2ACR LPC17_REG(0x40098020) /* Auto-baud Control Register */ #define U2ICR LPC17_REG(0x40098024) /* IrDA Control Register */ #define U2FDR LPC17_REG(0x40098028) /* Fractional Divider Register */ #define U2TER LPC17_REG(0x40098030) /* Transmit Enable Register */ /* UART 3 */ #define U3RBR LPC17_REG(0x4009C000) /* Receiver Buffer Register */ #define U3THR LPC17_REG(0x4009C000) /* Transmit Holding Register */ #define U3DLL LPC17_REG(0x4009C000) /* Divisor Latch LSB */ #define U3DLM LPC17_REG(0x4009C004) /* Divisor Latch MSB */ #define U3IER LPC17_REG(0x4009C004) /* Interrupt Enable Register */ #define U3IIR LPC17_REG(0x4009C008) /* Interrupt ID Register */ #define U3FCR LPC17_REG(0x4009C008) /* FIFO Control Register */ #define U3LCR LPC17_REG(0x4009C00C) /* Line Control Register */ #define U3LSR LPC17_REG(0x4009C014) /* Line Status Register */ #define U3SCR LPC17_REG(0x4009C01C) /* Scratch Pad Register */ #define U3ACR LPC17_REG(0x4009C020) /* Auto-baud Control Register */ #define U3ICR LPC17_REG(0x4009C024) /* IrDA Control Register */ #define U3FDR LPC17_REG(0x4009C028) /* Fractional Divider Register */ #define U3TER LPC17_REG(0x4009C030) /* Transmit Enable Register */ /* * skipped: * * UARTn Receiver Buffer Register (U0RBR - 0x4000 C000, U2RBR - 0x4009 8000, U3RBR - 0x4009 C000) * UARTn Transmit Holding Register (U0THR - 0x4000 C000, U2THR - 0x4009 8000, U3THR - 0x4009 C000) * UARTn Divisor Latch LSB register (U0DLL - 0x4000 C000, U2DLL - 0x4009 8000, U3DLL - 0x4009 C000) * UARTn Divisor Latch MSB register (U0DLM - 0x4000 C004, U2DLL - 0x4009 8004, U3DLL - 0x4009 C004) */ /* UARTn Interrupt Enable Register (U0IER - 0x4000 C004, U2IER - 0x4009 8004, U3IER - 0x4009 C004) */ #define UIER_RBR_Interrupt_Enable (0x1 << 0) #define UIER_THRE_Interrupt_Enable (0x1 << 1) #define UIER_RX_Line_Status_Interrupt_Enable (0x1 << 2) #define UIER_ABEOIntEn (0x1 << 8) #define UIER_ABTOIntEn (0x1 << 9) /* UARTn Interrupt Identification Register (U0IIR - 0x4000 C008, U2IIR - 0x4009 8008, U3IIR - 0x4009 C008) */ #define UIIR_IntStatus (0x1 << 0) #define UIIR_IntId (0x7 << 1) #define UIIR_FIFO Enable (0x3 << 6) #define UIIR_ABEOInt (0x1 << 8) #define UIIR_ABTOInt (0x1 << 9) /* UARTn FIFO Control Register (U0FCR - 0x4000 C008, U2FCR - 0x4009 8008, U3FCR - 0x4009 C008) */ #define UFCR_FIFO_Enable (0x1 << 0) #define UFCR_RX_FIFO_Reset (0x1 << 1) #define UFCR_TX_FIFO_Reset (0x1 << 2) #define UFCR_DMA_Mode_Select (0x1 << 3) #define UFCR_RX_Trigger_Level (0x3 << 6) /* UARTn Line Control Register (U0LCR - 0x4000 C00C, U2LCR - 0x4009 800C, U3LCR - 0x4009 C00C) */ #define ULCR_Word_Length_Select (0x3 << 0) #define ULCR_Stop_Bit_Select (0x1 << 2) #define ULCR_Parity_Enable (0x1 << 3) #define ULCR_Parity_Select (0x3 << 4) #define ULCR_Break_Control (0x1 << 6) #define ULCR_DLAB (0x1 << 7) /* UARTn Line Status Register (U0LSR - 0x4000 C014, U2LSR - 0x4009 8014, U3LSR - 0x4009 C014) */ #define ULSR_RDR (0x1 << 0) #define ULSR_OE (0x1 << 1) #define ULSR_PE (0x1 << 2) #define ULSR_FE (0x1 << 3) #define ULSR_BI (0x1 << 4) #define ULSR_THRE (0x1 << 5) #define ULSR_TEMT (0x1 << 6) #define ULSR_RXFE (0x1 << 7) /* skipped UARTn Scratch Pad Register (U0SCR - 0x4000 C01C, U2SCR - 0x4009 801C U3SCR - 0x4009 C01C) */ /* UARTn Auto-baud Control Register (U0ACR - 0x4000 C020, U2ACR - 0x4009 8020, U3ACR - 0x4009 C020) */ #define UACR_Start (0x1 << 0) #define UACR_Mode (0x1 << 1) #define UACR_AutoRestart (0x1 << 2) #define UACR_ABEOIntClr (0x1 << 8) #define UACR_ABTOIntClr (0x1 << 9) /* UARTn IrDA Control Register (U0ICR - 0x4000 C024, U2ICR - 0x4009 8024, U3ICR - 0x4009 C024) */ #define UICR_IrDAEn (0x1 << 0) #define UICR_IrDAInv (0x1 << 1) #define UICR_FixPulseEn (0x1 << 2) #define UICR_PulseDiv (0x7 << 3) /* UARTn Fractional Divider Register (U0FDR - 0x4000 C028, U2FDR - 0x4009 8028, U3FDR - 0x4009 C028) */ #define UFDR_DIVADDVAL (0xF << 0) #define UFDR_MULVAL (0xF << 4) /* UARTn Transmit Enable Register (U0TER - 0x4000 C030, U2TER - 0x4009 8030, U3TER - 0x4009 C030) */ #define UTER_TXEN (0x1 << 7) /* UART 1 registers */ #define U1RBR LPC17_REG(0x40010000) /* Receiver Buffer Register */ #define U1THR LPC17_REG(0x40010000) /* Transmit Holding Register */ #define U1DLL LPC17_REG(0x40010000) /* Divisor Latch LSB */ #define U1DLM LPC17_REG(0x40010004) /* Divisor Latch MSB */ #define U1IER LPC17_REG(0x40010004) /* Interrupt Enable Register */ #define U1IIR LPC17_REG(0x40010008) /* Interrupt ID Register */ #define U1FCR LPC17_REG(0x40010008) /* FIFO Control Register */ #define U1LCR LPC17_REG(0x4001000C) /* Line Control Register */ #define U1MCR LPC17_REG(0x40010010) /* Modem Control Register */ #define U1LSR LPC17_REG(0x40010014) /* Line Status Register */ #define U1MSR LPC17_REG(0x40010018) /* Modem Status Register */ #define U1SCR LPC17_REG(0x4001001C) /* Scratch Pad Register */ #define U1ACR LPC17_REG(0x40010020) /* Auto-baud Control Register */ #define U1FDR LPC17_REG(0x40010028) /* Fractional Divider Register */ #define U1TER LPC17_REG(0x40010030) /* Transmit Enable Register */ #define U1RS485CTRL LPC17_REG(0x4001004C) /* RS-485/EIA-485 Control */ #define U1ADRMATCH LPC17_REG(0x40010050) /* RS-485/EIA-485 address match */ #define U1RS485DLY LPC17_REG(0x40010054) /* RS-485/EIA-485 direction control delay */ /* * skipped: * * UART1 Receiver Buffer Register (U1RBR - 0x4001 0000) * UART1 Transmitter Holding Register (U1THR - 0x4001 0000) * UART1 Divisor Latch LSB Register (U1DLL - 0x4001 0000) * UART1 Divisor Latch MSB Register (U1DLM - 0x4001 0004) */ /* UART1 Interrupt Enable Register (U1IER - 0x4001 0004) */ #define U1IER_RBR (0x1 << 0) #define U1IER_THRE (0x1 << 1) #define U1IER_RX_Line (0x1 << 2) #define U1IER_Modem_Status (0x1 << 3) #define U1IER_CTS (0x1 << 7) #define U1IER_ABEOIntEn (0x1 << 8) #define U1IER_ABTOIntEn (0x1 << 9) /* UART1 Interrupt Identification Register (U1IIR - 0x4001 0008) */ #define U1IIR_IntStatus (0x1 << 0) #define U1IIR_IntId (0x7 << 1) #define U1IIR_FIFO_Enable (0x3 << 6) #define U1IIR_ABEOInt (0x1 << 8) #define U1IIR_ABTOInt (0x1 << 9) /* UART1 FIFO Control Register (U1FCR - 0x4001 0008) */ #define U1FCR_FIFO_Enable (0x1 << 0) #define U1FCR_RX_FIFO_Reset (0x1 << 1) #define U1FCR_TX_FIFO_Reset (0x1 << 2) #define U1FCR_DMA_Mode_Select (0x1 << 3) #define U1FCR_RX_Trigger_Level (0x3 << 6) /* UART1 Line Control Register (U1LCR - 0x4001 000C) */ #define U1LCR_Word_Length_Select (0x3 << 0) #define U1LCR_Stop_Bit_Select (0x1 << 2) #define U1LCR_Parity_Enable (0x1 << 3) #define U1LCR_Parity_Select (0x3 << 4) #define U1LCR_Break_Control (0x1 << 6) #define U1LCR_DLAB (0x1 << 7) /* UART1 Modem Control Register (U1MCR - 0x4001 0010) */ #define U1MCR_DTR_Control (0x1 << 0) #define U1MCR_RTS_Control (0x1 << 1) #define U1MCR_Loopback_Mode_Select (0x1 << 4) #define U1MCR_RTSen (0x1 << 6) #define U1MCR_CTSen (0x1 << 7) /* UART1 Line Status Register (U1LSR - 0x4001 0014) */ #define U1LSR_RDR (0x1 << 0) #define U1LSR_OE (0x1 << 1) #define U1LSR_PE (0x1 << 2) #define U1LSR_FE (0x1 << 3) #define U1LSR_BI (0x1 << 4) #define U1LSR_THRE (0x1 << 5) #define U1LSR_TEMT (0x1 << 6) #define U1LSR_RXFE (0x1 << 7) /* UART1 Modem Status Register (U1MSR - 0x4001 0018) */ #define U1MSR_Delta_CTS (0x1 << 0) #define U1MSR_Delta_DSR (0x1 << 1) #define U1MSR_Trailing_Edge_RI (0x1 << 2) #define U1MSR_Delta_DCD (0x1 << 3) #define U1MSR_CTS (0x1 << 4) #define U1MSR_DSR (0x1 << 5) #define U1MSR_RI (0x1 << 6) #define U1MSR_DCD (0x1 << 7) /* skipped UART1 Scratch Pad Register (U1SCR - 0x4001 001C) */ /* UART1 Auto-baud Control Register (U1ACR - 0x4001 0020) */ #define U1ACR_Start (0x1 << 0) #define U1ACR_Mode (0x1 << 1) #define U1ACR_AutoRestart (0x1 << 2) #define U1ACR_ABEOIntClr (0x1 << 8) #define U1ACR_ABTOIntClr (0x1 << 9) /* UART1 Fractional Divider Register (U1FDR - 0x4001 0028) */ #define U1FDR_DIVADDVAL (0xF << 0) #define U1FDR_MULVAL (0xF << 4) /* UART1 Transmit Enable Register (U1TER - 0x4001 0030) */ #define U1TER_TXEN (0x1 << 7) /* UART1 RS485 Control register (U1RS485CTRL - 0x4001 004C) */ #define U1RS485CTRL_NMMEN (0x1 << 0) #define U1RS485CTRL_RXDIS (0x1 << 1) #define U1RS485CTRL_AADEN (0x1 << 2) #define U1RS485CTRL_SEL (0x1 << 3) #define U1RS485CTRL_DCTRL (0x1 << 4) #define U1RS485CTRL_OINV (0x1 << 5) /* * skipped: * * UART1 RS-485 Address Match register (U1RS485ADRMATCH - 0x4001 0050) * UART1 RS-485 Delay value register (U1RS485DLY - 0x4001 0054) */ /* CAN registers */ /* CAN acceptance filter and central CAN registers */ #define AFMR LPC17_REG(0x4003C000) /* Acceptance Filter Register */ #define SFF_sa LPC17_REG(0x4003C004) /* Standard Frame Individual Start Address Register */ #define SFF_GRP_sa LPC17_REG(0x4003C008) /* Standard Frame Group Start Address Register */ #define EFF_sa LPC17_REG(0x4003C00C) /* Extended Frame Start Address Register */ #define EFF_GRP_sa LPC17_REG(0x4003C010) /* Extended Frame Group Start Address Register */ #define ENDofTable LPC17_REG(0x4003C014) /* End of AF Tables register */ #define LUTerrAd LPC17_REG(0x4003C018) /* LUT Error Address register */ #define LUTerr LPC17_REG(0x4003C01C) /* LUT Error Register */ #define CANTxSR LPC17_REG(0x40040000) /* CAN Central Transmit Status Register */ #define CANRxSR LPC17_REG(0x40040004) /* CAN Central Receive Status Register */ #define CANMSR LPC17_REG(0x40040008) /* CAN Central Miscellaneous Register */ /* CAN1 controller registers */ #define CAN1MOD LPC17_REG(0x40044000) /* MOD Controls the operating mode */ #define CAN1CMR LPC17_REG(0x40044004) /* CMR Command bits that affect the state of the CAN Controller */ #define CAN1GSR LPC17_REG(0x40044008) /* GSR Global Controller Status and Error Counters */ #define CAN1ICR LPC17_REG(0x4004400C) /* ICR Interrupt status, Arbitration Lost Capture, Error Code Capture */ #define CAN1IER LPC17_REG(0x40044010) /* IER Interrupt Enable */ #define CAN1BTR LPC17_REG(0x40044014) /* BTR Bus Timing */ #define CAN1EWL LPC17_REG(0x40044018) /* EWL Error Warning Limit */ #define CAN1SR LPC17_REG(0x4004401C) /* SR Status Register */ #define CAN1RFS LPC17_REG(0x40044020) /* RFS Receive frame status */ #define CAN1RID LPC17_REG(0x40044024) /* RID Received Identifier */ #define CAN1RDA LPC17_REG(0x40044028) /* RDA Received data bytes 1-4 */ #define CAN1RDB LPC17_REG(0x4004402C) /* RDB Received data bytes 5-8 */ #define CAN1TFI1 LPC17_REG(0x40044030) /* TFI1 Transmit frame info (Tx Buffer 1) */ #define CAN1TID1 LPC17_REG(0x40044034) /* TID1 Transmit Identifier (Tx Buffer 1) */ #define CAN1TDA1 LPC17_REG(0x40044038) /* TDA1 Transmit data bytes 1-4 (Tx Buffer 1) */ #define CAN1TDB1 LPC17_REG(0x4004403C) /* TDB1 Transmit data bytes 5-8 (Tx Buffer 1) */ #define CAN1TFI2 LPC17_REG(0x40044040) /* TFI2 Transmit frame info (Tx Buffer 2) */ #define CAN1TID2 LPC17_REG(0x40044044) /* TID2 Transmit Identifier (Tx Buffer 2) */ #define CAN1TDA2 LPC17_REG(0x40044048) /* TDA2 Transmit data bytes 1-4 (Tx Buffer 2) */ #define CAN1TDB2 LPC17_REG(0x4004404C) /* TDB2 Transmit data bytes 5-8 (Tx Buffer 2) */ #define CAN1TFI3 LPC17_REG(0x40044050) /* TFI3 Transmit frame info (Tx Buffer 3) */ #define CAN1TID3 LPC17_REG(0x40044054) /* TID3 Transmit Identifier (Tx Buffer 3) */ #define CAN1TDA3 LPC17_REG(0x40044058) /* TDA3 Transmit data bytes 1-4 (Tx Buffer 3) */ #define CAN1TDB3 LPC17_REG(0x4004405C) /* TDB3 Transmit data bytes 5-8 (Tx Buffer 3) */ /* CAN2 controller registers */ #define CAN2MOD LPC17_REG(0x40048000) /* MOD Controls the operating mode */ #define CAN2CMR LPC17_REG(0x40048004) /* CMR Command bits that affect the state of the CAN Controller */ #define CAN2GSR LPC17_REG(0x40048008) /* GSR Global Controller Status and Error Counters */ #define CAN2ICR LPC17_REG(0x4004800C) /* ICR Interrupt status, Arbitration Lost Capture, Error Code Capture */ #define CAN2IER LPC17_REG(0x40048010) /* IER Interrupt Enable */ #define CAN2BTR LPC17_REG(0x40048014) /* BTR Bus Timing */ #define CAN2EWL LPC17_REG(0x40048018) /* EWL Error Warning Limit */ #define CAN2SR LPC17_REG(0x4004801C) /* SR Status Register */ #define CAN2RFS LPC17_REG(0x40048020) /* RFS Receive frame status */ #define CAN2RID LPC17_REG(0x40048024) /* RID Received Identifier */ #define CAN2RDA LPC17_REG(0x40048028) /* RDA Received data bytes 1-4 */ #define CAN2RDB LPC17_REG(0x4004802C) /* RDB Received data bytes 5-8 */ #define CAN2TFI1 LPC17_REG(0x40048030) /* TFI1 Transmit frame info (Tx Buffer 1) */ #define CAN2TID1 LPC17_REG(0x40048034) /* TID1 Transmit Identifier (Tx Buffer 1) */ #define CAN2TDA1 LPC17_REG(0x40048038) /* TDA1 Transmit data bytes 1-4 (Tx Buffer 1) */ #define CAN2TDB1 LPC17_REG(0x4004803C) /* TDB1 Transmit data bytes 5-8 (Tx Buffer 1) */ #define CAN2TFI2 LPC17_REG(0x40048040) /* TFI2 Transmit frame info (Tx Buffer 2) */ #define CAN2TID2 LPC17_REG(0x40048044) /* TID2 Transmit Identifier (Tx Buffer 2) */ #define CAN2TDA2 LPC17_REG(0x40048048) /* TDA2 Transmit data bytes 1-4 (Tx Buffer 2) */ #define CAN2TDB2 LPC17_REG(0x4004804C) /* TDB2 Transmit data bytes 5-8 (Tx Buffer 2) */ #define CAN2TFI3 LPC17_REG(0x40048050) /* TFI3 Transmit frame info (Tx Buffer 3) */ #define CAN2TID3 LPC17_REG(0x40048054) /* TID3 Transmit Identifier (Tx Buffer 3) */ #define CAN2TDA3 LPC17_REG(0x40048058) /* TDA3 Transmit data bytes 1-4 (Tx Buffer 3) */ #define CAN2TDB3 LPC17_REG(0x4004805C) /* TDB3 Transmit data bytes 5-8 (Tx Buffer 3) */ /* CAN Wake and Sleep registers */ #define CANSLEEPCLR LPC17_REG(0x400FC110) /* clear and read CAN channel sleep state */ #define CANWAKEFLAGS LPC17_REG(0x400FC114) /* read the wake-up state of the CAN channels */ /* CAN Mode register (CAN1MOD - 0x4004 4000, CAN2MOD - 0x4004 8000) */ #define CANMOD_RM (0x1 << 0) #define CANMOD_LOM (0x1 << 1) #define CANMOD_STM (0x1 << 2) #define CANMOD_TPM (0x1 << 3) #define CANMOD_SM (0x1 << 4) #define CANMOD_RPM (0x1 << 5) #define CANMOD_TM (0x1 << 7) /* CAN Command Register (CAN1CMR - 0x4004 x004, CAN2CMR - 0x4004 8004) */ #define CANCMR_TR (0x1 << 0) #define CANCMR_AT (0x1 << 1) #define CANCMR_RRB (0x1 << 2) #define CANCMR_CDO (0x1 << 3) #define CANCMR_SRR (0x1 << 4) #define CANCMR_STB1 (0x1 << 5) #define CANCMR_STB2 (0x1 << 6) #define CANCMR_STB3 (0x1 << 7) /* CAN Global Status Register (CAN1GSR - 0x4004 x008, CAN2GSR - 0x4004 8008) */ #define CANGSR_RBS (0x1 << 0) #define CANGSR_DOS (0x1 << 1) #define CANGSR_TBS (0x1 << 2) #define CANGSR_TCS (0x1 << 3) #define CANGSR_RS (0x1 << 4) #define CANGSR_TS (0x1 << 5) #define CANGSR_ES (0x1 << 6) #define CANGSR_BS (0x1 << 7) #define CANGSR_RXERR (0xFF << 16) #define CANGSR_TXERR (0xFF << 24) /* CAN Interrupt and Capture Register (CAN1ICR - 0x4004 400C, CAN2ICR - 0x4004 800C) */ #define CANICR_RI (0x1 << 0) #define CANICR_TI1 (0x1 << 1) #define CANICR_EI (0x1 << 2) #define CANICR_DOI (0x1 << 3) #define CANICR_WUI (0x1 << 4) #define CANICR_EPI (0x1 << 5) #define CANICR_ALI (0x1 << 6) #define CANICR_BEI (0x1 << 7) #define CANICR_IDI (0x1 << 8) #define CANICR_TI2 (0x1 << 9) #define CANICR_TI3 (0x1 << 10) #define CANICR_ERRBIT (0x1F << 16) #define CANICR_ERRDIR (0x1 << 21) #define CANICR_ERRC (0x3 << 22) #define CANICR_ALCBIT (0xFF << 24) /* CAN Interrupt Enable Register (CAN1IER - 0x4004 4010, CAN2IER - 0x4004 8010) */ #define CANIER_RIE (0x1 << 0) #define CANIER_TIE1 (0x1 << 1) #define CANIER_EIE (0x1 << 2) #define CANIER_DOIE (0x1 << 3) #define CANIER_WUIE (0x1 << 4) #define CANIER_EPIE (0x1 << 5) #define CANIER_ALIE (0x1 << 6) #define CANIER_BEIE (0x1 << 7) #define CANIER_IDIE (0x1 << 8) #define CANIER_TIE2 (0x1 << 9) #define CANIER_TIE3 (0x1 << 10) /* CAN Bus Timing Register (CAN1BTR - 0x4004 4014, CAN2BTR - 0x4004 8014) */ #define CANBTR_BRP (0x3FF << 0) #define CANBTR_SJW (0x3 << 14) #define CANBTR_TESG1 (0xF << 16) #define CANBTR_TESG2 (0x7 << 20) #define CANBTR_SAM (0x1 << 23) /* skipped CAN Error Warning Limit register (CAN1EWL - 0x4004 4018, CAN2EWL - 0x4004 8018) */ /* CAN Status Register (CAN1SR - 0x4004 401C, CAN2SR - 0x4004 801C) */ #define CANSR_RBS1 (0x1 << 0) #define CANSR_DOS1 (0x1 << 1) #define CANSR_TBS1 (0x1 << 2) #define CANSR_TCS1 (0x1 << 3) #define CANSR_RS1 (0x1 << 4) #define CANSR_TS1 (0x1 << 5) #define CANSR_ES1 (0x1 << 6) #define CANSR_BS1 (0x1 << 7) #define CANSR_RBS2 (0x1 << 8) #define CANSR_DOS2 (0x1 << 9) #define CANSR_TBS2 (0x1 << 10) #define CANSR_TCS2 (0x1 << 11) #define CANSR_RS2 (0x1 << 12) #define CANSR_TS2 (0x1 << 13) #define CANSR_ES2 (0x1 << 14) #define CANSR_BS2 (0x1 << 15) #define CANSR_RBS3 (0x1 << 16) #define CANSR_DOS3 (0x1 << 17) #define CANSR_TBS3 (0x1 << 18) #define CANSR_TCS3 (0x1 << 19) #define CANSR_RS3 (0x1 << 20) #define CANSR_TS3 (0x1 << 21) #define CANSR_ES3 (0x1 << 22) #define CANSR_BS3 (0x1 << 23) /* CAN Receive Frame Status register (CAN1RFS - 0x4004 4020, CAN2RFS - 0x4004 8020) */ #define CANRFS_ID_Index (0x3FF << 0) #define CANRFS_BP (0x1 << 10) #define CANRFS_DLC (0xF << 16) #define CANRFS_RTR (0x1 << 30) #define CANRFS_FF (0x1 << 31) /* skipped CAN Receive Identifier register (CAN1RID - 0x4004 4024, CAN2RID - 0x4004 8024) */ /* CAN Receive Data register A (CAN1RDA - 0x4004 4028, CAN2RDA - 0x4004 8028) */ #define CANRDA_Data_1 (0xFF << 0) #define CANRDA_Data_2 (0xFF << 8) #define CANRDA_Data_3 (0xFF << 16) #define CANRDA_Data_4 (0xFF << 24) /* CAN Receive Data register B (CAN1RDB - 0x4004 402C, CAN2RDB - 0x4004 802C) */ #define CANRDB_Data_5 (0xFF << 0) #define CANRDB_Data_6 (0xFF << 8) #define CANRDB_Data_7 (0xFF << 16) #define CANRDB_Data_8 (0xFF << 24) /* CAN Transmit Frame Information register (CAN1TFI[1/2/3] - 0x4004 40[30/ 40/50], CAN2TFI[1/2/3] - 0x4004 80[30/40/50]) */ #define CANTFIm_PRIO (0xFF << 0) #define CANTFIm_DLC (0xF << 16) #define CANTFIm_RTR (0x1 << 30) #define CANTFIm_FF (0x1 << 31) /* skipped CAN Transmit Identifier register (CAN1TID[1/2/3] - 0x4004 40[34/44/54], CAN2TID[1/2/3] - 0x4004 80[34/44/54]) */ /* CAN Transmit Data register A (CAN1TDA[1/2/3] - 0x4004 40[38/48/58], CAN2TDA[1/2/3] - 0x4004 80[38/48/58]) */ #define CANTDAm_Data_1 (0xFF << 0) #define CANTDAm_Data_2 (0xFF << 8) #define CANTDAm_Data_3 (0xFF << 16) #define CANTDAm_Data_4 (0xFF << 24) /* CAN Transmit Data register B (CAN1TDB[1/2/3] - 0x4004 40[3C/4C/5C], CAN2TDB[1/2/3] - 0x4004 80[3C/4C/5C]) */ #define CANTDBm_Data_5 (0xFF << 0) #define CANTDBm_Data_6 (0xFF << 8) #define CANTDBm_Data_7 (0xFF << 16) #define CANTDBm_Data_8 (0xFF << 24) /* CAN Sleep Clear register (CANSLEEPCLR - 0x400F C110) */ #define CANSLEEPCLR_CAN1SLEEP (0x1 << 1) #define CANSLEEPCLR_CAN2SLEEP (0x1 << 2) /* CAN Wake-up Flags register (CANWAKEFLAGS - 0x400F C114) */ #define CANWAKEFLAGS_CAN1WAKE (0x1 << 1) #define CANWAKEFLAGS_CAN2WAKE (0x1 << 2) /* Central Transmit Status Register (CANTxSR - 0x4004 0000) */ #define CANTxSR_TS1 (0x1 << 0) #define CANTxSR_TS2 (0x1 << 1) #define CANTxSR_TBS1 (0x1 << 8) #define CANTxSR_TBS2 (0x1 << 9) #define CANTxSR_TCS1 (0x1 << 16) #define CANTxSR_TCS2 (0x1 << 17) /* Central Receive Status Register (CANRxSR - 0x4004 0004) */ #define CANRxSR_RS1 (0x1 << 0) #define CANRxSR_RS2 (0x1 << 1) #define CANRxSR_RB1 (0x1 << 8) #define CANRxSR_RB2 (0x1 << 9) #define CANRxSR_DOS1 (0x1 << 16) #define CANRxSR_DOS2 (0x1 << 17) /* Central Miscellaneous Status Register (CANMSR - 0x4004 0008) */ #define CANMSR_E1 (0x1 << 0) #define CANMSR_E2 (0x1 << 1) #define CANMSR_BS1 (0x1 << 8) #define CANMSR_BS2 (0x1 << 9) /* Acceptance Filter Mode Register (AFMR - 0x4003 C000) */ #define AFMR_AccOff (0x1 << 0) #define AFMR_AccBP (0x1 << 1) #define AFMR_eFCAN (0x1 << 2) /* * skipped: * * Standard Frame Individual Start Address register (SFF_sa - 0x4003 C004) * Standard Frame Group Start Address register (SFF_GRP_sa - 0x4003 C008) * Extended Frame Start Address register (EFF_sa - 0x4003 C00C) * Extended Frame Group Start Address register (EFF_GRP_sa - 0x4003 C010) * End of AF Tables register (ENDofTable - 0x4003 C014) * LUT Error Address register (LUTerrAd - 0x4003 C018) * LUT Error register (LUTerr - 0x4003 C01C) * Global FullCANInterrupt Enable register (FCANIE - 0x4003 C020) */ /* FullCAN Interrupt and Capture registers (FCANIC0 - 0x4003 C024 and FCANIC1 - 0x4003 C028) */ #define FCANIC0_IntPnd0 (0x1 << 0) #define FCANIC0_IntPnd1 (0x1 << 1) #define FCANIC0_IntPnd2 (0x1 << 2) #define FCANIC0_IntPnd3 (0x1 << 3) #define FCANIC0_IntPnd4 (0x1 << 4) #define FCANIC0_IntPnd5 (0x1 << 5) #define FCANIC0_IntPnd6 (0x1 << 6) #define FCANIC0_IntPnd7 (0x1 << 7) #define FCANIC0_IntPnd8 (0x1 << 8) #define FCANIC0_IntPnd9 (0x1 << 9) #define FCANIC0_IntPnd10 (0x1 << 10) #define FCANIC0_IntPnd11 (0x1 << 11) #define FCANIC0_IntPnd12 (0x1 << 12) #define FCANIC0_IntPnd13 (0x1 << 13) #define FCANIC0_IntPnd14 (0x1 << 14) #define FCANIC0_IntPnd15 (0x1 << 15) #define FCANIC0_IntPnd16 (0x1 << 16) #define FCANIC0_IntPnd17 (0x1 << 17) #define FCANIC0_IntPnd18 (0x1 << 18) #define FCANIC0_IntPnd19 (0x1 << 19) #define FCANIC0_IntPnd20 (0x1 << 20) #define FCANIC0_IntPnd21 (0x1 << 21) #define FCANIC0_IntPnd22 (0x1 << 22) #define FCANIC0_IntPnd23 (0x1 << 23) #define FCANIC0_IntPnd24 (0x1 << 24) #define FCANIC0_IntPnd25 (0x1 << 25) #define FCANIC0_IntPnd26 (0x1 << 26) #define FCANIC0_IntPnd27 (0x1 << 27) #define FCANIC0_IntPnd28 (0x1 << 28) #define FCANIC0_IntPnd29 (0x1 << 29) #define FCANIC0_IntPnd30 (0x1 << 30) #define FCANIC0_IntPnd31 (0x1 << 31) #define FCANIC1_IntPnd32 (0x1 << 0) #define FCANIC1_IntPnd33 (0x1 << 1) #define FCANIC1_IntPnd34 (0x1 << 2) #define FCANIC1_IntPnd35 (0x1 << 3) #define FCANIC1_IntPnd36 (0x1 << 4) #define FCANIC1_IntPnd37 (0x1 << 5) #define FCANIC1_IntPnd38 (0x1 << 6) #define FCANIC1_IntPnd39 (0x1 << 7) #define FCANIC1_IntPnd40 (0x1 << 8) #define FCANIC1_IntPnd41 (0x1 << 9) #define FCANIC1_IntPnd42 (0x1 << 10) #define FCANIC1_IntPnd43 (0x1 << 11) #define FCANIC1_IntPnd44 (0x1 << 12) #define FCANIC1_IntPnd45 (0x1 << 13) #define FCANIC1_IntPnd46 (0x1 << 14) #define FCANIC1_IntPnd47 (0x1 << 15) #define FCANIC1_IntPnd48 (0x1 << 16) #define FCANIC1_IntPnd49 (0x1 << 17) #define FCANIC1_IntPnd50 (0x1 << 18) #define FCANIC1_IntPnd51 (0x1 << 19) #define FCANIC1_IntPnd52 (0x1 << 20) #define FCANIC1_IntPnd53 (0x1 << 21) #define FCANIC1_IntPnd54 (0x1 << 22) #define FCANIC1_IntPnd55 (0x1 << 23) #define FCANIC1_IntPnd56 (0x1 << 24) #define FCANIC1_IntPnd57 (0x1 << 25) #define FCANIC1_IntPnd58 (0x1 << 26) #define FCANIC1_IntPnd59 (0x1 << 27) #define FCANIC1_IntPnd60 (0x1 << 28) #define FCANIC1_IntPnd61 (0x1 << 29) #define FCANIC1_IntPnd62 (0x1 << 30) #define FCANIC1_IntPnd63 (0x1 << 31) /* SPI registers */ #define S0SPCR LPC17_REG(0x40020000) /* SPI Control Register */ #define S0SPSR LPC17_REG(0x40020004) /* SPI Status Register */ #define S0SPDR LPC17_REG(0x40020008) /* SPI Data Register */ #define S0SPCCR LPC17_REG(0x4002000C) /* SPI Clock Counter Register */ #define S0SPINT LPC17_REG(0x4002001C) /* SPI Interrupt Flag */ /* SPI Control Register (S0SPCR - 0x4002 0000) */ #define S0SPCR_BitEnab (0x1 << 2) #define S0SPCR_CPHA (0x1 << 3) #define S0SPCR_CPOL (0x1 << 4) #define S0SPCR_MSTR (0x1 << 5) #define S0SPCR_LSBF (0x1 << 6) #define S0SPCR_SPIE (0x1 << 7) #define S0SPCR_BITS (0xF << 8) /* SPI Status Register (S0SPSR - 0x4002 0004) */ #define S0SPSR_ABRT (0x1 << 3) #define S0SPSR_MODF (0x1 << 4) #define S0SPSR_ROVR (0x1 << 5) #define S0SPSR_WCOL (0x1 << 6) #define S0SPSR_SPIF (0x1 << 7) /* * skipped: * * SPI Data Register (S0SPDR - 0x4002 0008) * SPI Clock Counter Register (S0SPCCR - 0x4002 000C) */ /* SPI Test Control Register (SPTCR - 0x4002 0010) */ #define SPTCR_Test (0x7F << 1) /* SPI Test Status Register (SPTSR - 0x4002 0014) */ #define SPTSR_ABRT (0x1 << 3) #define SPTSR_MODF (0x1 << 4) #define SPTSR_ROVR (0x1 << 5) #define SPTSR_WCOL (0x1 << 6) #define SPTSR_SPIF (0x1 << 7) /* skipped SPI Interrupt Register (S0SPINT - 0x4002 001C) */ /* SSP registers */ /* SSP0 registers */ #define SSP0CR0 LPC17_REG(0x40088000) /* CR0 Control Register 0 */ #define SSP0CR1 LPC17_REG(0x40088004) /* CR1 Control Register 1 */ #define SSP0DR LPC17_REG(0x40088008) /* DR Data Register */ #define SSP0SR LPC17_REG(0x4008800C) /* SR Status Register */ #define SSP0CPSR LPC17_REG(0x40088010) /* CPSR Clock Prescale Register */ #define SSP0IMSC LPC17_REG(0x40088014) /* IMSC Interrupt Mask Set and Clear Register */ #define SSP0RIS LPC17_REG(0x40088018) /* RIS Raw Interrupt Status Register */ #define SSP0MIS LPC17_REG(0x4008801C) /* MIS Masked Interrupt Status Register */ #define SSP0ICR LPC17_REG(0x40088020) /* ICR SSPICR Interrupt Clear Register */ #define SSP0DMACR LPC17_REG(0x40088024) /* DMACR DMA Control Register */ /* SSP1 registers */ #define SSP1CR0 LPC17_REG(0x40030000) /* CR0 Control Register 0 */ #define SSP1CR1 LPC17_REG(0x40030004) /* CR1 Control Register 1 */ #define SSP1DR LPC17_REG(0x40030008) /* DR Data Register */ #define SSP1SR LPC17_REG(0x4003000C) /* SR Status Register */ #define SSP1CPSR LPC17_REG(0x40030010) /* CPSR Clock Prescale Register */ #define SSP1IMSC LPC17_REG(0x40030014) /* IMSC Interrupt Mask Set and Clear Register */ #define SSP1RIS LPC17_REG(0x40030018) /* RIS Raw Interrupt Status Register */ #define SSP1MIS LPC17_REG(0x4003001C) /* MIS Masked Interrupt Status Register */ #define SSP1ICR LPC17_REG(0x40030020) /* ICR SSPICR Interrupt Clear Register */ #define SSP1DMACR LPC17_REG(0x40030024) /* DMACR DMA Control Register */ /* SSPn Control Register 0 (SSP0CR0 - 0x4008 8000, SSP1CR0 - 0x4003 0000) */ #define SSPCR0_DSS (0xF << 0) #define SSPCR0_FRF (0x3 << 4) #define SSPCR0_CPOL (0x1 << 6) #define SSPCR0_CPHA (0x1 << 7) #define SSPCR0_SCR (0xFF << 8) /* SSPn Control Register 1 (SSP0CR1 - 0x4008 8004, SSP1CR1 - 0x4003 0004) */ #define SSPCR1_LBM (0x1 << 0) #define SSPCR1_SSE (0x1 << 1) #define SSPCR1_MS (0x1 << 2) #define SSPCR1_SOD (0x1 << 3) /* skipped SSPn Data Register (SSP0DR - 0x4008 8008, SSP1DR - 0x4003 0008) */ /* SSPn Status Register (SSP0SR - 0x4008 800C, SSP1SR - 0x4003 000C) */ #define SSPSR_TFE (0x1 << 0) #define SSPSR_TNF (0x1 << 1) #define SSPSR_RNE (0x1 << 2) #define SSPSR_RFF (0x1 << 3) #define SSPSR_BSY (0x1 << 4) /* skipped SSPn Clock Prescale Register (SSP0CPSR - 0x4008 8010, SSP1CPSR - 0x4003 0010) */ /* SSPn Interrupt Mask Set/Clear Register (SSP0IMSC - 0x4008 8014, SSP1IMSC - 0x4003 0014) */ #define SSPIMSC_RORIM (0x1 << 0) #define SSPIMSC_RTIM (0x1 << 1) #define SSPIMSC_RXIM (0x1 << 2) #define SSPIMSC_TXIM (0x1 << 3) /* SSPn Raw Interrupt Status Register (SSP0RIS - 0x4008 8018, SSP1RIS - 0x4003 0018) */ #define SSPRIS_RORRIS (0x1 << 0) #define SSPRIS_RTRIS (0x1 << 1) #define SSPRIS_RXRIS (0x1 << 2) #define SSPRIS_TXRIS (0x1 << 3) /* SSPn Masked Interrupt Status Register (SSP0MIS - 0x4008 801C, SSP1MIS - 0x4003 001C) */ #define SSPMIS_RORMIS (0x1 << 0) #define SSPMIS_RTMIS (0x1 << 1) #define SSPMIS_RXMIS (0x1 << 2) #define SSPMIS_TXMIS (0x1 << 3) /* SSPn Interrupt Clear Register (SSP0ICR - 0x4008 8020, SSP1ICR - 0x4003 0020) */ #define SSPICR_RORIC (0x1 << 0) #define SSPICR_RTIC (0x1 << 1) /* SSPn DMA Control Register (SSP0DMACR - 0x4008 8024, SSP1DMACR - 0x4003 0024) */ #define SSPDMACR_RXDMAE (0x1 << 0) #define SSPDMACR_TXDMAE (0x1 << 1) /* I2C registers */ /* I2C0 registers */ #define I2C0CONSET LPC17_REG(0x4001C000) /* I2CONSET I2C Control Set Register */ #define I2C0STAT LPC17_REG(0x4001C004) /* I2STAT I2C Status Register */ #define I2C0DAT LPC17_REG(0x4001C008) /* I2DAT I2C Data Register */ #define I2C0ADR0 LPC17_REG(0x4001C00C) /* I2ADR0 I2C Slave Address Register 0 */ #define I2C0SCLH LPC17_REG(0x4001C010) /* I2SCLH SCH Duty Cycle Register High Half Word */ #define I2C0SCLL LPC17_REG(0x4001C014) /* I2SCLL SCL Duty Cycle Register Low Half Word */ #define I2C0CONCLR LPC17_REG(0x4001C018) /* I2CONCLR I2C Control Clear Register */ #define I2C0MMCTRL LPC17_REG(0x4001C01C) /* MMCTRL Monitor mode control register */ #define I2C0ADR1 LPC17_REG(0x4001C020) /* I2ADR1 I2C Slave Address Register 1 */ #define I2C0ADR2 LPC17_REG(0x4001C024) /* 2ADR2 I2C Slave Address Register 2 */ #define I2C0ADR3 LPC17_REG(0x4001C028) /* I2ADR3 I2C Slave Address Register 3 */ #define I2C0DATA_BUFFER LPC17_REG(0x4001C02C) /* I2DATA_BUFFER Data buffer register */ #define I2C0MASK0 LPC17_REG(0x4001C030) /* I2MASK0 I2C Slave address mask register 0 */ #define I2C0MASK1 LPC17_REG(0x4001C034) /* I2MASK1 I2C Slave address mask register 1 */ #define I2C0MASK2 LPC17_REG(0x4001C038) /* I2MASK2 I2C Slave address mask register 2 */ #define I2C0MASK3 LPC17_REG(0x4001C03C) /* I2MASK3 I2C Slave address mask register 3 */ /* I2C1 registers */ #define I2C1CONSET LPC17_REG(0x4005C000) /* I2CONSET I2C Control Set Register */ #define I2C1STAT LPC17_REG(0x4005C004) /* I2STAT I2C Status Register */ #define I2C1DAT LPC17_REG(0x4005C008) /* I2DAT I2C Data Register */ #define I2C1ADR0 LPC17_REG(0x4005C00C) /* I2ADR0 I2C Slave Address Register 0 */ #define I2C1SCLH LPC17_REG(0x4005C010) /* I2SCLH SCH Duty Cycle Register High Half Word */ #define I2C1SCLL LPC17_REG(0x4005C014) /* I2SCLL SCL Duty Cycle Register Low Half Word */ #define I2C1CONCLR LPC17_REG(0x4005C018) /* I2CONCLR I2C Control Clear Register */ #define I2C1MMCTRL LPC17_REG(0x4005C01C) /* MMCTRL Monitor mode control register */ #define I2C1ADR1 LPC17_REG(0x4005C020) /* I2ADR1 I2C Slave Address Register 1 */ #define I2C1ADR2 LPC17_REG(0x4005C024) /* 2ADR2 I2C Slave Address Register 2 */ #define I2C1ADR3 LPC17_REG(0x4005C028) /* I2ADR3 I2C Slave Address Register 3 */ #define I2C1DATA_BUFFER LPC17_REG(0x4005C02C) /* I2DATA_BUFFER Data buffer register */ #define I2C1MASK0 LPC17_REG(0x4005C030) /* I2MASK0 I2C Slave address mask register 0 */ #define I2C1MASK1 LPC17_REG(0x4005C034) /* I2MASK1 I2C Slave address mask register 1 */ #define I2C1MASK2 LPC17_REG(0x4005C038) /* I2MASK2 I2C Slave address mask register 2 */ #define I2C1MASK3 LPC17_REG(0x4005C03C) /* I2MASK3 I2C Slave address mask register 3 */ /* I2C2 registers */ #define I2C2CONSET LPC17_REG(0x400A0000) /* I2CONSET I2C Control Set Register */ #define I2C2STAT LPC17_REG(0x400A0004) /* I2STAT I2C Status Register */ #define I2C2DAT LPC17_REG(0x400A0008) /* I2DAT I2C Data Register */ #define I2C2ADR0 LPC17_REG(0x400A000C) /* I2ADR0 I2C Slave Address Register 0 */ #define I2C2SCLH LPC17_REG(0x400A0010) /* I2SCLH SCH Duty Cycle Register High Half Word */ #define I2C2SCLL LPC17_REG(0x400A0014) /* I2SCLL SCL Duty Cycle Register Low Half Word */ #define I2C2CONCLR LPC17_REG(0x400A0018) /* I2CONCLR I2C Control Clear Register */ #define I2C2MMCTRL LPC17_REG(0x400A001C) /* MMCTRL Monitor mode control register */ #define I2C2ADR1 LPC17_REG(0x400A0020) /* I2ADR1 I2C Slave Address Register 1 */ #define I2C2ADR2 LPC17_REG(0x400A0024) /* 2ADR2 I2C Slave Address Register 2 */ #define I2C2ADR3 LPC17_REG(0x400A0028) /* I2ADR3 I2C Slave Address Register 3 */ #define I2C2DATA_BUFFER LPC17_REG(0x400A002C) /* I2DATA_BUFFER Data buffer register */ #define I2C2MASK0 LPC17_REG(0x400A0030) /* I2MASK0 I2C Slave address mask register 0 */ #define I2C2MASK1 LPC17_REG(0x400A0034) /* I2MASK1 I2C Slave address mask register 1 */ #define I2C2MASK2 LPC17_REG(0x400A0038) /* I2MASK2 I2C Slave address mask register 2 */ #define I2C2MASK3 LPC17_REG(0x400A003C) /* I2MASK3 I2C Slave address mask register 3 */ /* I2C Control Set register (I2CONSET: I2C0, I2C0CONSET - 0x4001 C000; I2C1, I2C1CONSET - 0x4005 C000; I2C2, I2C2CONSET - 0x400A 0000) */ #define I2CONSET_AA (0x1 << 2) #define I2CONSET_SI (0x1 << 3) #define I2CONSET_STO (0x1 << 4) #define I2CONSET_STA (0x1 << 5) #define I2CONSET_I2EN (0x1 << 6) /* I2C Control Clear register (I2CONCLR: I2C0, I2C0CONCLR - 0x4001 C018; I2C1, I2C1CONCLR - 0x4005 C018; I2C2, I2C2CONCLR - 0x400A 0018) */ #define I2CONCLR_AAC (0x1 << 2) #define I2CONCLR_SIC (0x1 << 3) #define I2CONCLR_STAC (0x1 << 5) #define I2CONCLR_I2ENC (0x1 << 6) /* * skipped: * * I2C Status register (I2STAT: I2C0, I2C0STAT - 0x4001 C004; I2C1, I2C1STAT - 0x4005 C004; I2C2, I2C2STAT - 0x400A 0004) * I2C Data register (I2DAT: I2C0, I2C0DAT - 0x4001 C008; I2C1, I2C1DAT - 0x4005 C008; I2C2, I2C2DAT - 0x400A 0008) */ /* I2C Monitor mode control register (I2MMCTRL: I2C0, I2C0MMCTRL - 0x4001 C01C; I2C1, I2C1MMCTRL- 0x4005 C01C; I2C2, I2C2MMCTRL- 0x400A 001C) */ #define I2MMCTRL_MM_ENA (0x1 << 0) #define I2MMCTRL_ENA_SCL (0x1 << 1) #define I2MMCTRL_MATCH_ALL (0x1 << 2) /* skipped I2C Data buffer register (I2DATA_BUFFER: I2C0, I2CDATA_BUFFER - 0x4001 C02C; I2C1, I2C1DATA_BUFFER- 0x4005 C02C; I2C2, I2C2DATA_BUFFER- 0x400A 002C) */ /* I2C Slave Address registers (I2ADR0 to 3: I2C0, I2C0ADR[0, 1, 2, 3]- 0x4001 C0[0C, 20, 24, 28]; I2C1, I2C1ADR[0, 1, 2, 3] - address 0x4005 C0[0C, 20, 24, 28]; I2C2, I2C2ADR[0, 1, 2, 3] - address 0x400A 00[0C, 20, 24, 28]) */ #define I2ADR_GC (0x1 << 0) #define I2ADR_Address (0x7F << 1) /* I2C Mask registers (I2MASK0 to 3: I2C0, I2C0MASK[0, 1, 2, 3] - 0x4001 C0[30, 34, 38, 3C]; I2C1, I2C1MASK[0, 1, 2, 3] - address 0x4005 C0[30, 34, 38, 3C]; I2C2, I2C2MASK[0, 1, 2, 3] - address 0x400A 00[30, 34, 38, 3C]) */ #define I2MASK_MASK (0x7F << 1) /* * skipped: * * I2C SCL HIGH duty cycle register (I2SCLH: I2C0, I2C0SCLH - 0x4001 C010; I2C1, I2C1SCLH - 0x4005 C010; I2C2, I2C2SCLH - 0x400A 0010) * I2C SCL Low duty cycle register (I2SCLL: I2C0 - I2C0SCLL: 0x4001 C014; I2C1 - I2C1SCLL: 0x4005 C014; I2C2 - I2C2SCLL: 0x400A 0014) */ /* I2S registers */ #define I2SDAO LPC17_REG(0x400A8000) /* Digital Audio Output Register */ #define I2SDAI LPC17_REG(0x400A8004) /* Digital Audio Input Register */ #define I2STXFIFO LPC17_REG(0x400A8008) /* Transmit FIFO */ #define I2SRXFIFO LPC17_REG(0x400A800C) /* Receive FIFO */ #define I2SSTATE LPC17_REG(0x400A8010) /* Status Feedback Register */ #define I2SDMA1 LPC17_REG(0x400A8014) /* DMA Configuration Register 1 */ #define I2SDMA2 LPC17_REG(0x400A8018) /* DMA Configuration Register 2 */ #define I2SIRQ LPC17_REG(0x400A801C) /* Interrupt Request Control Register */ #define I2STXRATE LPC17_REG(0x400A8020) /* Transmit MCLK divider */ #define I2SRXRATE LPC17_REG(0x400A8024) /* Receive MCLK divider */ #define I2STXBITRATE LPC17_REG(0x400A8028) /* Transmit bit rate divider */ #define I2SRXBITRATE LPC17_REG(0x400A802C) /* Receive bit rate divider */ #define I2STXMODE LPC17_REG(0x400A8030) /* Transmit mode control */ #define I2SRXMODE LPC17_REG(0x400A8034) /* Receive mode control */ /* Digital Audio Output register (I2SDAO - 0x400A 8000) */ #define I2SDAO_wordwidth (0x3 << 0) #define I2SDAO_mono (0x1 << 2) #define I2SDAO_stop (0x1 << 3) #define I2SDAO_reset (0x1 << 4) #define I2SDAO_ws_sel (0x1 << 5) #define I2SDAO_ws_halfperiod (0x1FF << 6) #define I2SDAO_mute (0x1 << 15) /* Digital Audio Input register (I2SDAI - 0x400A 8004) */ #define I2SDAI_wordwidth (0x3 << 0) #define I2SDAI_mono (0x1 << 2) #define I2SDAI_stop (0x1 << 3) #define I2SDAI_reset (0x1 << 4) #define I2SDAI_ws_sel (0x1 << 5) #define I2SDAI_ws_halfperiod (0x1FF << 6) /* * skipped: * * Transmit FIFO register (I2STXFIFO - 0x400A 8008) * Receive FIFO register (I2SRXFIFO - 0x400A 800C) */ /* Status Feedback register (I2SSTATE - 0x400A 8010) */ #define I2SSTATE_irq (0x1 << 0) #define I2SSTATE_dmareq1 (0x1 << 1) #define I2SSTATE_dmareq2 (0x1 << 2) #define I2SSTATE_Unused (0x1F << 3) #define I2SSTATE_rx_level (0xF << 8) #define I2SSTATE_tx_level (0xF << 16) /* DMA Configuration Register 1 (I2SDMA1 - 0x400A 8014) */ #define I2SDMA1_rx_dma1_enable (0x1 << 0) #define I2SDMA1_tx_dma1_enable (0x1 << 1) #define I2SDMA1_rx_depth_dma1 (0xF << 8) #define I2SDMA1_tx_depth_dma1 (0xF << 16) /* DMA Configuration Register 2 (I2SDMA2 - 0x400A 8018) */ #define I2SDMA2_rx_dma2_enable (0x1 << 0) #define I2SDMA2_tx_dma2_enable (0x1 << 1) #define I2SDMA2_rx_depth_dma2 (0xF << 8) #define I2SDMA2_tx_depth_dma2 (0xF << 16) /* Interrupt Request Control register (I2SIRQ - 0x400A 801C) */ #define I2SIRQ_rx_Irq_enable (0x1 << 0) #define I2SIRQ_tx_Irq_enable (0x1 << 1) #define I2SIRQ_rx_depth_irq (0xF << 8) #define I2SIRQ_tx_depth_irq (0xF << 16) /* Transmit Clock Rate register (I2STXRATE - 0x400A 8020) */ #define I2STXRATE_Y_divider (0xFF << 0) #define I2STXRATE_X_divider (0xFF << 8) /* Receive Clock Rate register (I2SRXRATE - 0x400A 8024) */ #define I2SRXRATE_Y_divider (0xFF << 0) #define I2SRXRATE_X_divider (0xFF << 8) /* * skipped: * * Transmit Clock Bit Rate register (I2STXBITRATE - 0x400A 8028) * Receive Clock Bit Rate register (I2SRXBITRATE - 0x400A 802C) */ /* Transmit Mode Control register (I2STXMODE - 0x400A 8030) */ #define I2STXMODE_TXCLKSEL (0x3 << 0) #define I2STXMODE_TX4PIN (0x1 << 2) #define I2STXMODE_TXMCENA (0x1 << 3) /* Receive Mode Control register (I2SRXMODE - 0x400A 8034) */ #define I2SRXMODE_RXCLKSEL (0x3 << 0) #define I2SRXMODE_RX4PIN (0x1 << 2) #define I2SRXMODE_RXMCENA (0x1 << 3) /* timer registers */ /* timer 1 registers */ #define T0IR LPC17_REG(0x40004000) /* IR Interrupt Register */ #define T0TCR LPC17_REG(0x40004004) /* TCR Timer Control Register */ #define T0TC LPC17_REG(0x40004008) /* TC Timer Counter */ #define T0PR LPC17_REG(0x4000400C) /* PR Prescale Register */ #define T0PC LPC17_REG(0x40004010) /* PC Prescale Counter */ #define T0MCR LPC17_REG(0x40004014) /* MCR Match Control Register */ #define T0MR0 LPC17_REG(0x40004018) /* MR0 Match Register 0 */ #define T0MR1 LPC17_REG(0x4000401C) /* MR1 Match Register 1 */ #define T0MR2 LPC17_REG(0x40004020) /* MR2 Match Register 2 */ #define T0MR3 LPC17_REG(0x40004024) /* MR3 Match Register 3 */ #define T0CCR LPC17_REG(0x40004028) /* CCR Capture Control Register */ #define T0CR0 LPC17_REG(0x4000402C) /* CR0 Capture Register 0 */ #define T0CR1 LPC17_REG(0x40004030) /* CR1 Capture Register 1 */ #define T0EMR LPC17_REG(0x4000403C) /* EMR External Match Register */ #define T0CTCR LPC17_REG(0x40004070) /* CTCR Count Control Register */ /* timer 2 registers */ #define T1IR LPC17_REG(0x40008000) /* IR Interrupt Register */ #define T1TCR LPC17_REG(0x40008004) /* TCR Timer Control Register */ #define T1TC LPC17_REG(0x40008008) /* TC Timer Counter */ #define T1PR LPC17_REG(0x4000800C) /* PR Prescale Register */ #define T1PC LPC17_REG(0x40008010) /* PC Prescale Counter */ #define T1MCR LPC17_REG(0x40008014) /* MCR Match Control Register */ #define T1MR0 LPC17_REG(0x40008018) /* MR0 Match Register 0 */ #define T1MR1 LPC17_REG(0x4000801C) /* MR1 Match Register 1 */ #define T1MR2 LPC17_REG(0x40008020) /* MR2 Match Register 2 */ #define T1MR3 LPC17_REG(0x40008024) /* MR3 Match Register 3 */ #define T1CCR LPC17_REG(0x40008028) /* CCR Capture Control Register */ #define T1CR0 LPC17_REG(0x4000802C) /* CR0 Capture Register 0 */ #define T1CR1 LPC17_REG(0x40008030) /* CR1 Capture Register 1 */ #define T1EMR LPC17_REG(0x4000803C) /* EMR External Match Register */ #define T1CTCR LPC17_REG(0x40008070) /* CTCR Count Control Register */ /* timer 3 registers */ #define T2IR LPC17_REG(0x40090000) /* IR Interrupt Register */ #define T2TCR LPC17_REG(0x40090004) /* TCR Timer Control Register */ #define T2TC LPC17_REG(0x40090008) /* TC Timer Counter */ #define T2PR LPC17_REG(0x4009000C) /* PR Prescale Register */ #define T2PC LPC17_REG(0x40090010) /* PC Prescale Counter */ #define T2MCR LPC17_REG(0x40090014) /* MCR Match Control Register */ #define T2MR0 LPC17_REG(0x40090018) /* MR0 Match Register 0 */ #define T2MR1 LPC17_REG(0x4009001C) /* MR1 Match Register 1 */ #define T2MR2 LPC17_REG(0x40090020) /* MR2 Match Register 2 */ #define T2MR3 LPC17_REG(0x40090024) /* MR3 Match Register 3 */ #define T2CCR LPC17_REG(0x40090028) /* CCR Capture Control Register */ #define T2CR0 LPC17_REG(0x4009002C) /* CR0 Capture Register 0 */ #define T2CR1 LPC17_REG(0x40090030) /* CR1 Capture Register 1 */ #define T2EMR LPC17_REG(0x4009003C) /* EMR External Match Register */ #define T2CTCR LPC17_REG(0x40090070) /* CTCR Count Control Register */ /* timer 4 registers */ #define T3IR LPC17_REG(0x40094000) /* IR Interrupt Register */ #define T3TCR LPC17_REG(0x40094004) /* TCR Timer Control Register */ #define T3TC LPC17_REG(0x40094008) /* TC Timer Counter */ #define T3PR LPC17_REG(0x4009400C) /* PR Prescale Register */ #define T3PC LPC17_REG(0x40094010) /* PC Prescale Counter */ #define T3MCR LPC17_REG(0x40094014) /* MCR Match Control Register */ #define T3MR0 LPC17_REG(0x40094018) /* MR0 Match Register 0 */ #define T3MR1 LPC17_REG(0x4009401C) /* MR1 Match Register 1 */ #define T3MR2 LPC17_REG(0x40094020) /* MR2 Match Register 2 */ #define T3MR3 LPC17_REG(0x40094024) /* MR3 Match Register 3 */ #define T3CCR LPC17_REG(0x40094028) /* CCR Capture Control Register */ #define T3CR0 LPC17_REG(0x4009402C) /* CR0 Capture Register 0 */ #define T3CR1 LPC17_REG(0x40094030) /* CR1 Capture Register 1 */ #define T3EMR LPC17_REG(0x4009403C) /* EMR External Match Register */ #define T3CTCR LPC17_REG(0x40094070) /* CTCR Count Control Register */ /* Interrupt Register (T[0/1/2/3]IR - 0x4000 4000, 0x4000 8000, 0x4009 0000, 0x4009 4000) */ #define TIR_MR0_Interrupt (0x1 << 0) #define TIR_MR1_Interrupt (0x1 << 1) #define TIR_MR2 Interrupt (0x1 << 2) #define TIR_MR3_Interrupt (0x1 << 3) #define TIR_CR0_Interrupt (0x1 << 4) #define TIR_CR1_Interrupt (0x1 << 5) /* Timer Control Register (T[0/1/2/3]CR - 0x4000 4004, 0x4000 8004, 0x4009 0004, 0x4009 4004) */ #define TCR_Counter_Enable (0x1 << 0) #define TCR_Counter_Reset (0x1 << 1) /* Count Control Register (T[0/1/2/3]CTCR - 0x4000 4070, 0x4000 8070, 0x4009 0070, 0x4009 4070) */ #define TCTCR_Counter_Timer_Mode (0x3 << 0) #define TCTCR_Count_Input_Select (0x3 << 2) /* * skipped: * * Timer Counter registers (T0TC - T3TC, 0x4000 4008, 0x4000 8008, 0x4009 0008, 0x4009 4008) * Prescale register (T0PR - T3PR, 0x4000 400C, 0x4000 800C, 0x4009 000C, 0x4009 400C) * Prescale Counter register (T0PC - T3PC, 0x4000 4010, 0x4000 8010, 0x4009 0010, 0x4009 4010) * Match Registers (MR0 - MR3) */ /* Match Control Register (T[0/1/2/3]MCR - 0x4000 4014, 0x4000 8014, 0x4009 0014, 0x4009 4014) */ #define TMCR_MR0I (0x1 << 0) #define TMCR_MR0R (0x1 << 1) #define TMCR_MR0S (0x1 << 2) #define TMCR_MR1I (0x1 << 3) #define TMCR_MR1R (0x1 << 4) #define TMCR_MR1S (0x1 << 5) #define TMCR_MR2I (0x1 << 6) #define TMCR_MR2R (0x1 << 7) #define TMCR_MR2S (0x1 << 8) #define TMCR_MR3I (0x1 << 9) #define TMCR_MR3R (0x1 << 10) #define TMCR_MR3S (0x1 << 11) /* skipped Capture Registers (CR0 - CR1) */ /* Capture Control Register (T[0/1/2/3]CCR - 0x4000 4028, 0x4000 8028, 0x4009 0028, 0x4009 4028) */ #define TCCR_CAP0RE (0x1 << 0) #define TCCR_CAP0FE (0x1 << 1) #define TCCR_CAP0I (0x1 << 2) #define TCCR_CAP1RE (0x1 << 3) #define TCCR_CAP1FE (0x1 << 4) #define TCCR_CAP1I (0x1 << 5) /* External Match Register (T[0/1/2/3]EMR - 0x4000 403C, 0x4000 803C, 0x4009 003C, 0x4009 403C) */ #define TEMR_EM0 (0x1 << 0) #define TEMR_EM1 (0x1 << 1) #define TEMR_EM2 (0x1 << 2) #define TEMR_EM3 (0x1 << 3) #define TEMR_EMC0 (0x3 << 4) #define TEMR_EMC1 (0x3 << 6) #define TEMR_EMC2 (0x3 << 8) #define TEMR_EMC3 (0x3 << 10) /* repetitive interrupt timer registers */ #define RICOMPVAL LPC17_REG(0x400B0000) /* Compare register */ #define RIMASK LPC17_REG(0x400B0004) /* Mask register */ #define RICTRL LPC17_REG(0x400B0008) /* Control register */ #define RICOUNTER LPC17_REG(0x400B000C) /* 32-bit counter */ /* * skipped: * * RI Compare Value register (RICOMPVAL - 0x400B 0000) * RI Mask register (RIMASK - 0x400B 0004) */ /* RI Control register (RICTRL - 0x400B 0008) */ #define RICTRL_RITINT (0x1 << 0) #define RICTRL_RITENCLR (0x1 << 1) #define RICTRL_RITENBR (0x1 << 2) #define RICTRL_RITEN (0x1 << 3) /* skipped RI Counter register (RICOUNTER - 0x400B 000C) */ /* system tick timer resgisters */ #define STCTRL LPC17_REG(0xE000E010) /* System Timer Control and status register */ #define STRELOAD LPC17_REG(0xE000E014) /* System Timer Reload value register */ #define STCURR LPC17_REG(0xE000E018) /* System Timer Current value register */ #define STCALIB LPC17_REG(0xE000E01C) /* System Timer Calibration value register */ /* System Timer Control and status register (STCTRL - 0xE000 E010) */ #define STCTRL_ENABLE (0x1 << 0) #define STCTRL_TICKINT (0x1 << 1) #define STCTRL_CLKSOURCE (0x1 << 2) #define STCTRL_COUNTFLAG (0x1 << 16) /* * skipped: * * System Timer Reload value register (STRELOAD - 0xE000 E014) * System Timer Current value register (STCURR - 0xE000 E018) */ /* System Timer Calibration value register (STCALIB - 0xE000 E01C) */ #define STCALIB_TENMS (0xFFFFFF << 0) #define STCALIB_SKEW (0x1 << 30) #define STCALIB_NOREF (0x1 << 31) /* PWM1 registers */ #define PWM1IR LPC17_REG(0x40018000) /* IR Interrupt Register */ #define PWM1TCR LPC17_REG(0x40018004) /* TCR Timer Control Register */ #define PWM1TC LPC17_REG(0x40018008) /* TC Timer Counter */ #define PWM1PR LPC17_REG(0x4001800C) /* PR Prescale Register */ #define PWM1PC LPC17_REG(0x40018010) /* PC Prescale Counter */ #define PWM1MCR LPC17_REG(0x40018014) /* MCR Match Control Register */ #define PWM1MR0 LPC17_REG(0x40018018) /* MR0 Match Register 0 */ #define PWM1MR1 LPC17_REG(0x4001801C) /* MR1 Match Register 1 */ #define PWM1MR2 LPC17_REG(0x40018020) /* MR2 Match Register 2 */ #define PWM1MR3 LPC17_REG(0x40018024) /* MR3 Match Register 3 */ #define PWM1CCR LPC17_REG(0x40018028) /* CCR Capture Control Register */ #define PWM1CR0 LPC17_REG(0x4001802C) /* CR0 Capture Register 0 */ #define PWM1CR1 LPC17_REG(0x40018030) /* CR1 Capture Register 1 */ #define PWM1CR2 LPC17_REG(0x40018034) /* CR2 Capture Register 2 */ #define PWM1CR3 LPC17_REG(0x40018038) /* CR3 Capture Register 3 */ #define PWM1MR4 LPC17_REG(0x40018040) /* MR4 Match Register 4 */ #define PWM1MR5 LPC17_REG(0x40018044) /* MR5 Match Register 5 */ #define PWM1MR6 LPC17_REG(0x40018048) /* MR6 Match Register 6 */ #define PWM1PCR LPC17_REG(0x4001804C) /* PCR PWM Control Register */ #define PWM1LER LPC17_REG(0x40018050) /* LER Load Enable Register */ #define PWM1CTCR LPC17_REG(0x40018070) /* CTCR Count Control Register */ /* PWM Interrupt Register (PWM1IR - 0x4001 8000) */ #define PWM1IR_PWMMR0_Interrupt (0x1 << 0) #define PWM1IR_PWMMR1_Interrupt (0x1 << 1) #define PWM1IR_PWMMR2_Interrupt (0x1 << 2) #define PWM1IR_PWMMR3_Interrupt (0x1 << 3) #define PWM1IR_PWMCAP0_Interrupt (0x1 << 4) #define PWM1IR_PWMCAP1_Interrupt (0x1 << 5) #define PWM1IR_PWMMR4_Interrupt (0x1 << 8) #define PWM1IR_PWMMR5_Interrupt (0x1 << 9) #define PWM1IR_PWMMR6_Interrupt (0x1 << 10) /* PWM Timer Control Register (PWM1TCR 0x4001 8004) */ #define PWM1TCR_Counter_Enable (0x1 << 0) #define PWM1TCR_Counter_Reset (0x1 << 1) #define PWM1TCR_PWM_Enable (0x1 << 3) /* PWM Count Control Register (PWM1CTCR - 0x4001 8070) */ #define PWM1CTCR_Counter_Timer_Mode (0x3 << 0) #define PWM1CTCR_Count_Input_Select (0x3 << 2) /* PWM Match Control Register (PWM1MCR - 0x4001 8014) */ #define PWM1MCR_PWMMR0I (0x1 << 0) #define PWM1MCR_PWMMR0R (0x1 << 1) #define PWM1MCR_PWMMR0S (0x1 << 2) #define PWM1MCR_PWMMR1I (0x1 << 3) #define PWM1MCR_PWMMR1R (0x1 << 4) #define PWM1MCR_PWMMR1S (0x1 << 5) #define PWM1MCR_PWMMR2I (0x1 << 6) #define PWM1MCR_PWMMR2R (0x1 << 7) #define PWM1MCR_PWMMR2S (0x1 << 8) #define PWM1MCR_PWMMR3I (0x1 << 9) #define PWM1MCR_PWMMR3R (0x1 << 10) #define PWM1MCR_PWMMR3S (0x1 << 11) #define PWM1MCR_PWMMR4I (0x1 << 12) #define PWM1MCR_PWMMR4R (0x1 << 13) #define PWM1MCR_PWMMR4S (0x1 << 14) #define PWM1MCR_PWMMR5I (0x1 << 15) #define PWM1MCR_PWMMR5R (0x1 << 16) #define PWM1MCR_PWMMR5S (0x1 << 17) #define PWM1MCR_PWMMR6I (0x1 << 18) #define PWM1MCR_PWMMR6R (0x1 << 19) #define PWM1MCR_PWMMR6S (0x1 << 20) /* PWM Capture Control Register (PWM1CCR - 0x4001 8028) */ #define PWM1CCR_Capture_on_CAPn0_rising_edge (0x1 << 0) #define PWM1CCR_Capture_on_CAPn0_falling_edge (0x1 << 1) #define PWM1CCR_Interrupt_on_CAPn0_event (0x1 << 2) #define PWM1CCR_Capture_on_CAPn1_rising_edge (0x1 << 3) #define PWM1CCR_Capture_on_CAPn1_falling_edge (0x1 << 4) #define PWM1CCR_Interrupt_on_CAPn1_event (0x1 << 5) /* PWM Control Register (PWM1PCR - 0x4001 804C) */ #define PWM1PCR_PWMSEL2 (0x1 << 2) #define PWM1PCR_PWMSEL3 (0x1 << 3) #define PWM1PCR_PWMSEL4 (0x1 << 4) #define PWM1PCR_PWMSEL5 (0x1 << 5) #define PWM1PCR_PWMSEL6 (0x1 << 6) #define PWM1PCR_PWMENA1 (0x1 << 9) #define PWM1PCR_PWMENA2 (0x1 << 10) #define PWM1PCR_PWMENA3 (0x1 << 11) #define PWM1PCR_PWMENA4 (0x1 << 12) #define PWM1PCR_PWMENA5 (0x1 << 13) #define PWM1PCR_PWMENA6 (0x1 << 14) /* skipped PWM Latch Enable Register (PWM1LER - 0x4001 8050) */ /* MCPWM registers */ #define MCCON LPC17_REG(0x400B8000) /* PWM Control read address */ #define MCCON_SET LPC17_REG(0x400B8004) /* PWM Control set address */ #define MCCON_CLR LPC17_REG(0x400B8008) /* PWM Control clear address */ #define MCCAPCON LPC17_REG(0x400B800C) /* Capture Control read address */ #define MCCAPCON_SET LPC17_REG(0x400B8010) /* Capture Control set address */ #define MCCAPCON_CLR LPC17_REG(0x400B8014) /* Event Control clear address */ #define MCTC0 LPC17_REG(0x400B8018) /* Timer Counter register, channel 0 */ #define MCTC1 LPC17_REG(0x400B801C) /* Timer Counter register, channel 1 */ #define MCTC2 LPC17_REG(0x400B8020) /* Timer Counter register, channel 2 */ #define MCLIM0 LPC17_REG(0x400B8024) /* Limit register, channel 0 */ #define MCLIM1 LPC17_REG(0x400B8028) /* Limit register, channel 1 */ #define MCLIM2 LPC17_REG(0x400B802C) /* Limit register, channel 2 */ #define MCMAT0 LPC17_REG(0x400B8030) /* Match register, channel 0 */ #define MCMAT1 LPC17_REG(0x400B8034) /* Match register, channel 1 */ #define MCMAT2 LPC17_REG(0x400B8038) /* Match register, channel 2 */ #define MCDT LPC17_REG(0x400B803C) /* Dead time register */ #define MCCP LPC17_REG(0x400B8040) /* Commutation Pattern register */ #define MCCAP0 LPC17_REG(0x400B8044) /* Capture register, channel 0 */ #define MCCAP1 LPC17_REG(0x400B8048) /* Capture register, channel 1 */ #define MCCAP2 LPC17_REG(0x400B804C) /* Capture register, channel 2 */ #define MCINTEN LPC17_REG(0x400B8050) /* Interrupt Enable read address */ #define MCINTEN_SET LPC17_REG(0x400B8054) /* Interrupt Enable set address */ #define MCINTEN_CLR LPC17_REG(0x400B8058) /* Interrupt Enable clear address */ #define MCCNTCON LPC17_REG(0x400B805C) /* Count Control read address */ #define MCCNTCON_SET LPC17_REG(0x400B8060) /* Count Control set address */ #define MCCNTCON_CLR LPC17_REG(0x400B8064) /* Count Control clear address */ #define MCINTF LPC17_REG(0x400B8068) /* Interrupt flags read address */ #define MCINTF_SET LPC17_REG(0x400B806C) /* Interrupt flags set address */ #define MCINTF_CLR LPC17_REG(0x400B8070) /* Interrupt flags clear address */ #define MCCAP_CLR LPC17_REG(0x400B8074) /* Capture clear address */ /* MCPWM Control read address (MCCON - 0x400B 8000) */ #define MCCON_RUN0 (0x1 << 0) #define MCCON_CENTER0 (0x1 << 1) #define MCCON_POLA0 (0x1 << 2) #define MCCON_DTE0 (0x1 << 3) #define MCCON_DISUP0 (0x1 << 4) #define MCCON_RUN1 (0x1 << 8) #define MCCON_CENTER1 (0x1 << 9) #define MCCON_POLA1 (0x1 << 10) #define MCCON_DTE1 (0x1 << 11) #define MCCON_DISUP1 (0x1 << 12) #define MCCON_RUN2 (0x1 << 16) #define MCCON_CENTER2 (0x1 << 17) #define MCCON_POLA2 (0x1 << 18) #define MCCON_DTE2 (0x1 << 19) #define MCCON_DISUP2 (0x1 << 20) #define MCCON_INVBDC (0x1 << 29) #define MCCON_ACMODE (0x1 << 30) #define MCCON_DCMODE (0x1 << 31) /* * skipped: * * MCPWM Control set address (MCCON_SET - 0x400B 8004) * MCPWM Control clear address (MCCON_CLR - 0x400B 8008) */ /* MCPWM Capture Control read address (MCCAPCON - 0x400B 800C) */ #define MCCAPCON_CAP0MCI0_RE (0x1 << 0) #define MCCAPCON_CAP0MCI0_FE (0x1 << 1) #define MCCAPCON_CAP0MCI1_RE (0x1 << 2) #define MCCAPCON_CAP0MCI1_FE (0x1 << 3) #define MCCAPCON_CAP0MCI2_RE (0x1 << 4) #define MCCAPCON_CAP0MCI2_FE (0x1 << 5) #define MCCAPCON_CAP1MCI0_RE (0x1 << 6) #define MCCAPCON_CAP1MCI0_FE (0x1 << 7) #define MCCAPCON_CAP1MCI1_RE (0x1 << 8) #define MCCAPCON_CAP1MCI1_FE (0x1 << 9) #define MCCAPCON_CAP1MCI2_RE (0x1 << 10) #define MCCAPCON_CAP1MCI2_FE (0x1 << 11) #define MCCAPCON_CAP2MCI0_RE (0x1 << 12) #define MCCAPCON_CAP2MCI0_FE (0x1 << 13) #define MCCAPCON_CAP2MCI1_RE (0x1 << 14) #define MCCAPCON_CAP2MCI1_FE (0x1 << 15) #define MCCAPCON_CAP2MCI2_RE (0x1 << 16) #define MCCAPCON_CAP2MCI2_FE (0x1 << 17) #define MCCAPCON_RT0 (0x1 << 18) #define MCCAPCON_RT1 (0x1 << 19) #define MCCAPCON_RT2 (0x1 << 20) #define MCCAPCON_HNFCAP0 (0x1 << 21) #define MCCAPCON_HNFCAP1 (0x1 << 22) #define MCCAPCON_HNFCAP2 (0x1 << 23) /* * skipped: * * MCPWM Capture Control set address (MCCAPCON_SET - 0x400B 8010) * MCPWM Capture Control clear address (MCCAPCON_CLR - 0x400B 8014) */ /* MCPWM Interrupt Enable read address (MCINTEN - 0x400B 8050) */ #define MCINTEN_ILIM0 (0x1 << 0) #define MCINTEN_IMAT0 (0x1 << 1) #define MCINTEN_ICAP0 (0x1 << 2) #define MCINTEN_ILIM1 (0x1 << 4) #define MCINTEN_IMAT1 (0x1 << 5) #define MCINTEN_ICAP1 (0x1 << 6) #define MCINTEN_ILIM2 (0x1 << 8) #define MCINTEN_IMAT2 (0x1 << 9) #define MCINTEN_ICAP2 (0x1 << 10) #define MCINTEN_ABORT (0x1 << 15) /* MCPWM Interrupt Enable set address (MCINTEN_SET - 0x400B 8054) */ #define MCINT_SET_ILIM0 (0x1 << 0) #define MCINT_SET_IMAT0 (0x1 << 1) #define MCINT_SET_ICAP0 (0x1 << 2) #define MCINT_SET_ILIM1 (0x1 << 4) #define MCINT_SET_IMAT1 (0x1 << 5) #define MCINT_SET_ICAP1 (0x1 << 6) #define MCINT_SET_ILIM2 (0x1 << 8) #define MCINT_SET_IMAT2 (0x1 << 9) #define MCINT_SET_ICAP2 (0x1 << 10) #define MCINT_SET_ABORT (0x1 << 15) /* MCPWM Interrupt Enable clear address (MCINTEN_CLR - 0x400B 8058) */ #define MCINT_CLR_ILIM0 (0x1 << 0) #define MCINT_CLR_IMAT0 (0x1 << 1) #define MCINT_CLR_ICAP0 (0x1 << 2) #define MCINT_CLR_ILIM1 (0x1 << 4) #define MCINT_CLR_IMAT1 (0x1 << 5) #define MCINT_CLR_ICAP1 (0x1 << 6) #define MCINT_CLR_ILIM2 (0x1 << 8) #define MCINT_CLR_IMAT2 (0x1 << 9) #define MCINT_CLR_ICAP2 (0x1 << 10) #define MCINT_CLR_ABORT (0x1 << 15) /* MCPWM Interrupt Flags read address (MCINTF - 0x400B 8068) */ #define MCINTF_ILIM0 (0x1 << 0) #define MCINTF_IMAT0 (0x1 << 1) #define MCINTF_ICAP0 (0x1 << 2) #define MCINTF_ILIM1 (0x1 << 4) #define MCINTF_IMAT1 (0x1 << 5) #define MCINTF_ICAP1 (0x1 << 6) #define MCINTF_ILIM2 (0x1 << 8) #define MCINTF_IMAT2 (0x1 << 9) #define MCINTF_ICAP2 (0x1 << 10) #define MCINTF_ABORT (0x1 << 15) /* MCPWM Interrupt Flags set address (MCINTF_SET - 0x400B 806C) */ #define MCINTF_SET_ILIM0 (0x1 << 0) #define MCINTF_SET_IMAT0 (0x1 << 1) #define MCINTF_SET_ICAP0 (0x1 << 2) #define MCINTF_SET_ILIM1 (0x1 << 4) #define MCINTF_SET_IMAT1 (0x1 << 5) #define MCINTF_SET_ICAP1 (0x1 << 6) #define MCINTF_SET_ILIM2 (0x1 << 8) #define MCINTF_SET_IMAT2 (0x1 << 9) #define MCINTF_SET_ICAP2 (0x1 << 10) #define MCINTF_SET_ABORT (0x1 << 15) /* MCPWM Interrupt Flags clear address (MCINTF_CLR - 0x400B 8070) */ #define MCINTF_CLR_ILIM0 (0x1 << 0) #define MCINTF_CLR_IMAT0 (0x1 << 1) #define MCINTF_CLR_ICAP0 (0x1 << 2) #define MCINTF_CLR_ILIM1 (0x1 << 4) #define MCINTF_CLR_IMAT1 (0x1 << 5) #define MCINTF_CLR_ICAP1 (0x1 << 6) #define MCINTF_CLR_ILIM2 (0x1 << 8) #define MCINTF_CLR_IMAT2 (0x1 << 9) #define MCINTF_CLR_ICAP2 (0x1 << 10) #define MCINTF_CLR_ABORT (0x1 << 15) /* MCPWM Count Control read address (MCCNTCON - 0x400B 805C) */ #define MCCNTCON_TC0MCI0_RE (0x1 << 0) #define MCCNTCON_TC0MCI0_FE (0x1 << 1) #define MCCNTCON_TC0MCI1_RE (0x1 << 2) #define MCCNTCON_TC0MCI1_FE (0x1 << 3) #define MCCNTCON_TC0MCI2_RE (0x1 << 4) #define MCCNTCON_TC0MCI2_FE (0x1 << 5) #define MCCNTCON_TC1MCI0_RE (0x1 << 6) #define MCCNTCON_TC1MCI0_FE (0x1 << 7) #define MCCNTCON_TC1MCI1_RE (0x1 << 8) #define MCCNTCON_TC1MCI1_FE (0x1 << 9) #define MCCNTCON_TC1MCI2_RE (0x1 << 10) #define MCCNTCON_TC1MCI2_FE (0x1 << 11) #define MCCNTCON_TC2MCI0_RE (0x1 << 12) #define MCCNTCON_TC2MCI0_FE (0x1 << 13) #define MCCNTCON_TC2MCI1_RE (0x1 << 14) #define MCCNTCON_TC2MCI1_FE (0x1 << 15) #define MCCNTCON_TC2MCI2_RE (0x1 << 16) #define MCCNTCON_TC2MCI2_FE (0x1 << 17) #define MCCNTCON_CNTR0 (0x1 << 29) #define MCCNTCON_CNTR1 (0x1 << 30) #define MCCNTCON_CNTR2 (0x1 << 31) /* * skipped: * * MCPWM Count Control set address (MCCNTCON_SET - 0x400B 8060) * MCPWM Count Control clear address (MCCNTCON_CLR - 0x400B 8064) * MCPWM Timer/Counter 0-2 registers (MCTC0-2 - 0x400B 8018, 0x400B 801C, 0x400B 8020) * MCPWM Limit 0-2 registers (MCLIM0-2 - 0x400B 8024, 0x400B 8028, 0x400B 802C) * MCPWM Match 0-2 registers (MCMAT0-2 - 0x400B 8030, 0x400B 8034, 0x400B 8038) */ /* MCPWM Dead-time register (MCDT - 0x400B 803C) */ #define MCDT_DT0 (0x3FF << 0) #define MCDT_DT1 (0x3FF << 10) #define MCDT_DT2 (0x3FF << 20) /* MCPWM Commutation Pattern register (MCCP - 0x400B 8040) */ #define MCCP_CCPA0 (0x1 << 0) #define MCCP_CCPB0 (0x1 << 1) #define MCCP_CCPA1 (0x1 << 2) #define MCCP_CCPB1 (0x1 << 3) #define MCCP_CCPA2 (0x1 << 4) #define MCCP_CCPB2 (0x1 << 5) /* skipped MCPWM Capture read addresses (MCCAP0-2 - 0x400B 8044, 0x400B 8048, 0x400B 804C) */ /* MCPWM Capture clear address (MCCAP_CLR - 0x400B 8074) */ #define MCCAP_CLR_CAP_CLR0 (0x1 << 0) #define MCCAP_CLR_CAP_CLR1 (0x1 << 1) #define MCCAP_CLR_CAP_CLR2 (0x1 << 2) /* QEI registers */ /* Control registers */ #define QEICON LPC17_REG(0x400BC000) /* Control register */ #define QEICONF LPC17_REG(0x400BC008) /* Configuration register */ #define QEISTAT LPC17_REG(0x400BC004) /* Encoder status register */ /* Position, index, and timer registers */ #define QEIPOS LPC17_REG(0x400BC00C) /* Position register */ #define QEIMAXPOS LPC17_REG(0x400BC010) /* Maximum position register */ #define CMPOS0 LPC17_REG(0x400BC014) /* position compare register 0 */ #define CMPOS1 LPC17_REG(0x400BC018) /* position compare register 1 */ #define CMPOS2 LPC17_REG(0x400BC01C) /* position compare register 2 */ #define INXCNT LPC17_REG(0x400BC020) /* Index count register */ #define INXCMP LPC17_REG(0x400BC024) /* Index compare register */ #define QEILOAD LPC17_REG(0x400BC028) /* Velocity timer reload register */ #define QEITIME LPC17_REG(0x400BC02C) /* Velocity timer register */ #define QEIVEL LPC17_REG(0x400BC030) /* Velocity counter register */ #define QEICAP LPC17_REG(0x400BC034) /* Velocity capture register */ #define VELCOMP LPC17_REG(0x400BC038) /* Velocity compare register */ #define FILTER LPC17_REG(0x400BC03C) /* Digital filter register */ /* Interrupt registers */ #define QEIINTSTAT LPC17_REG(0x400BCFE0) /* Interrupt status register */ #define QEISET LPC17_REG(0x400BCFEC) /* Interrupt status set register */ #define QEICLR LPC17_REG(0x400BCFE8) /* Interrupt status clear register */ #define QEIIE LPC17_REG(0x400BCFE4) /* Interrupt enable register */ #define QEIIES LPC17_REG(0x400BCFDC) /* Interrupt enable set register */ #define QEIIEC LPC17_REG(0x400BCFD8) /* Interrupt enable clear register */ /* QEI Control register (QEICON - 0x400B C000) */ #define QEICON_RESP (0x1 << 0) #define QEICON_RESPI (0x1 << 1) #define QEICON_RESV (0x1 << 2) #define QEICON_RESI (0x1 << 3) /* QEI Configuration register (QEICONF - 0x400B C008) */ #define QEICONF_DIRINV (0x1 << 0) #define QEICONF_SIGMODE (0x1 << 1) #define QEICONF_CAPMODE (0x1 << 2) #define QEICONF_INVINX (0x1 << 3) /* QEI Status register (QEISTAT - 0x400B C004) */ #define QEISTAT_DIR (0x1 << 0) /* * skipped: * * QEI Position register (QEIPOS - 0x400B C00C) * QEI Maximum Position register (QEIMAXPOS - 0x400B C010) * QEI Position Compare register 0 (CMPOS0 - 0x400B C014) * QEI Position Compare register 1 (CMPOS1 - 0x400B C018) * QEI Position Compare register 2 (CMPOS2 - 0x400B C01C) * QEI Index Count register (INXCNT - 0x400B C020) * QEI Index Compare register (INXCMP - 0x400B C024) * QEI Timer Reload register (QEILOAD - 0x400B C028) * QEI Timer register (QEITIME - 0x400B C02C) * QEI Velocity register (QEIVEL - 0x400B C030) * QEI Velocity Capture register (QEICAP - 0x400B C034) * QEI Velocity Compare register (VELCOMP - 0x400B C038) * QEI Digital Filter register (FILTER - 0x400B C03C) */ /* QEI Interrupt Status register (QEIINTSTAT) */ #define QEIINTSTAT_INX_Int (0x1 << 0) #define QEIINTSTAT_TIM_Int (0x1 << 1) #define QEIINTSTAT_VELC_Int (0x1 << 2) #define QEIINTSTAT_DIR_Int (0x1 << 3) #define QEIINTSTAT_ERR_Int (0x1 << 4) #define QEIINTSTAT_ENCLK_Int (0x1 << 5) #define QEIINTSTAT_POS0_Int (0x1 << 6) #define QEIINTSTAT_POS1_Int (0x1 << 7) #define QEIINTSTAT_POS2_Int (0x1 << 8) #define QEIINTSTAT_REV_Int (0x1 << 9) #define QEIINTSTAT_POS0REV_Int (0x1 << 10) #define QEIINTSTAT_POS1REV_Int (0x1 << 11) #define QEIINTSTAT_POS2REV_Int (0x1 << 12) /* QEI Interrupt Set register (QEISET - 0x400B CFEC) */ #define QEISET_INX_Int (0x1 << 0) #define QEISET_TIM_Int (0x1 << 1) #define QEISET_VELC_Int (0x1 << 2) #define QEISET_DIR_Int (0x1 << 3) #define QEISET_ERR_Int (0x1 << 4) #define QEISET_ENCLK_Int (0x1 << 5) #define QEISET_POS0_Int (0x1 << 6) #define QEISET_POS1_Int (0x1 << 7) #define QEISET_POS2_Int (0x1 << 8) #define QEISET_REV_Int (0x1 << 9) #define QEISET_POS0REV_Int (0x1 << 10) #define QEISET_POS1REV_Int (0x1 << 11) #define QEISET_POS2REV_Int (0x1 << 12) /* QEI Interrupt Clear register (QEICLR - 0x400B CFE8) */ #define QEICLR_INX_Int (0x1 << 0) #define QEICLR_TIM_Int (0x1 << 1) #define QEICLR_VELC_Int (0x1 << 2) #define QEICLR_DIR_Int (0x1 << 3) #define QEICLR_ERR_Int (0x1 << 4) #define QEICLR_ENCLK_Int (0x1 << 5) #define QEICLR_POS0_Int (0x1 << 6) #define QEICLR_POS1_Int (0x1 << 7) #define QEICLR_POS2_Int (0x1 << 8) #define QEICLR_REV_Int (0x1 << 9) #define QEICLR_POS0REV_Int (0x1 << 10) #define QEICLR_POS1REV_Int (0x1 << 11) #define QEICLR_POS2REV_Int (0x1 << 12) /* QEI Interrupt Enable register (QEIIE - 0x400B CFE4) */ #define QEIIE_INX_Int (0x1 << 0) #define QEIIE_TIM_Int (0x1 << 1) #define QEIIE_VELC_Int (0x1 << 2) #define QEIIE_DIR_Int (0x1 << 3) #define QEIIE_ERR_Int (0x1 << 4) #define QEIIE_ENCLK_Int (0x1 << 5) #define QEIIE_POS0_Int (0x1 << 6) #define QEIIE_POS1_Int (0x1 << 7) #define QEIIE_POS2_Int (0x1 << 8) #define QEIIE_REV_Int (0x1 << 9) #define QEIIE_POS0REV_Int (0x1 << 10) #define QEIIE_POS1REV_Int (0x1 << 11) #define QEIIE_POS2REV_Int (0x1 << 12) /* QEI Interrupt Enable Set register (QEIIES - 0x400B CFDC) */ #define QEIIES_INX_Int (0x1 << 0) #define QEIIES_TIM_Int (0x1 << 1) #define QEIIES_VELC_Int (0x1 << 2) #define QEIIES_DIR_Int (0x1 << 3) #define QEIIES_ERR_Int (0x1 << 4) #define QEIIES_ENCLK_Int (0x1 << 5) #define QEIIES_POS0_Int (0x1 << 6) #define QEIIES_POS1_Int (0x1 << 7) #define QEIIES_POS2_Int (0x1 << 8) #define QEIIES_REV_Int (0x1 << 9) #define QEIIES_POS0REV_Int (0x1 << 10) #define QEIIES_POS1REV_Int (0x1 << 11) #define QEIIES_POS2REV_Int (0x1 << 12) /* QEI Interrupt Enable Clear register (QEIIEC - 0x400B CFD8) */ #define QEIIEC_INX_Int (0x1 << 0) #define QEIIEC_TIM_Int (0x1 << 1) #define QEIIEC_VELC_Int (0x1 << 2) #define QEIIEC_DIR_Int (0x1 << 3) #define QEIIEC_ERR_Int (0x1 << 4) #define QEIIEC_ENCLK_Int (0x1 << 5) #define QEIIEC_POS0_Int (0x1 << 6) #define QEIIEC_POS1_Int (0x1 << 7) #define QEIIEC_POS2_Int (0x1 << 8) #define QEIIEC_REV_Int (0x1 << 9) #define QEIIEC_POS0REV_Int (0x1 << 10) #define QEIIEC_POS1REV_Int (0x1 << 11) #define QEIIEC_POS2REV_Int (0x1 << 12) /* real-time clock (RTC) registers */ /* Miscellaneous registers */ #define RTC_ILR LPC17_REG(0x40024000) /* Interrupt Location Register */ #define RTC_CCR LPC17_REG(0x40024008) /* Clock Control Register */ #define RTC_CIIR LPC17_REG(0x4002400C) /* Counter Increment Interrupt Register */ #define RTC_AMR LPC17_REG(0x40024010) /* Alarm Mask Register */ #define RTC_AUX LPC17_REG(0x4002405C) /* RTC Auxiliary control register */ #define RTC_AUXEN LPC17_REG(0x40024058) /* RTC Auxiliary Enable register */ /* Consolidated time registers */ #define RTC_CTIME0 LPC17_REG(0x40024014) /* Consolidated Time Register 0 */ #define RTC_CTIME1 LPC17_REG(0x40024018) /* Consolidated Time Register 1 */ #define RTC_CTIME2 LPC17_REG(0x4002401C) /* Consolidated Time Register 2 */ /* Time counter registers */ #define RTC_SEC LPC17_REG(0x40024020) /* Seconds Counter */ #define RTC_MIN LPC17_REG(0x40024024) /* Minutes Register */ #define RTC_HOUR LPC17_REG(0x40024028) /* Hours Register */ #define RTC_DOM LPC17_REG(0x4002402C) /* Day of Month Register */ #define RTC_DOW LPC17_REG(0x40024030) /* Day of Week Register */ #define RTC_DOY LPC17_REG(0x40024034) /* Day of Year Register */ #define RTC_MONTH LPC17_REG(0x40024038) /* Months Register */ #define RTC_YEAR LPC17_REG(0x4002403C) /* Years Register */ #define RTC_CALIBRATION LPC17_REG(0x40024040) /* Calibration Value Register */ /* General purpose registers */ #define RTC_GPREG0 LPC17_REG(0x40024044) /* General Purpose Register 0 */ #define RTC_GPREG1 LPC17_REG(0x40024048) /* General Purpose Register 1 */ #define RTC_GPREG2 LPC17_REG(0x4002404C) /* General Purpose Register 2 */ #define RTC_GPREG3 LPC17_REG(0x40024050) /* General Purpose Register 3 */ #define RTC_GPREG4 LPC17_REG(0x40024054) /* General Purpose Register 4 */ /* Alarm register group */ #define RTC_ALSEC LPC17_REG(0x40024060) /* Alarm value for Seconds */ #define RTC_ALMIN LPC17_REG(0x40024064) /* Alarm value for Minutes */ #define RTC_ALHOUR LPC17_REG(0x40024068) /* Alarm value for Hours */ #define RTC_ALDOM LPC17_REG(0x4002406C) /* Alarm value for Day of Month */ #define RTC_ALDOW LPC17_REG(0x40024070) /* Alarm value for Day of Week */ #define RTC_ALDOY LPC17_REG(0x40024074) /* Alarm value for Day of Year */ #define RTC_ALMON LPC17_REG(0x40024078) /* Alarm value for Months */ #define RTC_ALYEAR LPC17_REG(0x4002407C) /* Alarm value for Year */ /* Interrupt Location Register (ILR - 0x4002 4000) */ #define RTC_ILR_RTCCIF (0x1 << 0) #define RTC_ILR_RTCALF (0x1 << 1) /* Clock Control Register (CCR - 0x4002 4008) */ #define RTC_CCR_CLKEN (0x1 << 0) #define RTC_CCR_CTCRST (0x1 << 1) #define RTC_CCR_CCALEN (0x1 << 4) /* Counter Increment Interrupt Register (CIIR - 0x4002 400C) */ #define RTC_CIIR_IMSEC (0x1 << 0) #define RTC_CIIR_IMMIN (0x1 << 1) #define RTC_CIIR_IMHOUR (0x1 << 2) #define RTC_CIIR_IMDOM (0x1 << 3) #define RTC_CIIR_IMDOW (0x1 << 4) #define RTC_CIIR_IMDOY (0x1 << 5) #define RTC_CIIR_IMMON (0x1 << 6) #define RTC_CIIR_IMYEAR (0x1 << 7) /* Alarm Mask Register (AMR - 0x4002 4010) */ #define RTC_AMR_AMRSEC (0x1 << 0) #define RTC_AMR_AMRMIN (0x1 << 1) #define RTC_AMR_AMRHOUR (0x1 << 2) #define RTC_AMR_AMRDOM (0x1 << 3) #define RTC_AMR_AMRDOW (0x1 << 4) #define RTC_AMR_AMRDOY (0x1 << 5) #define RTC_AMR_AMRMON (0x1 << 6) #define RTC_AMR_AMRYEAR (0x1 << 7) /* RTC Auxiliary control register (RTC_AUX - 0x4002 405C) */ #define RTC_AUX_RTC_OSCF (0x1 << 4) /* RTC Auxiliary Enable register (RTC_AUXEN - 0x4002 4058) */ #define RTC_AUXEN_RTC_OSCFEN (0x1 << 4) /* Consolidated Time Register 0 (CTIME0 - 0x4002 4014) */ #define RTC_CTIME0_Seconds (0x3F << 0) #define RTC_CTIME0_Minutes (0x3F << 8) #define RTC_CTIME0_Hours (0x1F << 16) #define RTC_CTIME0_Day_Of_Week (0x7 << 24) /* Consolidated Time Register 1 (CTIME1 - 0x4002 4018) */ #define RTC_CTIME1_Day_of_Month (0x1F << 0) #define RTC_CTIME1_Month (0xF << 8) #define RTC_CTIME1_Year (0xFFF << 0) /* Consolidated Time Register 2 (CTIME2 - 0x4002 401C) */ #define RTC_CTIME2_Day_of_Year (0xFFF << 0) /* skipped Time Counter registers (SEC, MIN, etc.) */ /* Calibration register (CALIBRATION - address 0x4002 4040) */ #define RTC_CALIBRATION_CALVAL (0x1FFFF << 0) #define RTC_CALIBRATION_CALDIR (0x1 << 17) /* * skipped: * * General purpose registers 0 to 4 (GPREG0 to GPREG4 - addresses 0x4002 4044 to 0x4002 4054) * Alarm register group (ALSEC, ALMIN, etc.) */ /* watchdog timer (WDT) registers */ #define WDMOD LPC17_REG(0x40000000) /* Watchdog mode register */ #define WDTC LPC17_REG(0x40000004) /* Watchdog timer constant register */ #define WDFEED LPC17_REG(0x40000008) /* Watchdog feed sequence register */ #define WDTV LPC17_REG(0x4000000C) /* Watchdog timer value register */ #define WDCLKSEL LPC17_REG(0x40000010) /* Watchdog clock source selection register */ /* Watchdog Mode register (WDMOD - 0x4000 0000) */ #define WDMOD_WDEN (0x1 << 0) #define WDMOD_WDRESET (0x1 << 1) #define WDMOD_WDTOF (0x1 << 2) #define WDMOD_WDINT (0x1 << 3) /* * skipped: * * Watchdog Timer Constant register (WDTC - 0x4000 0004) * Watchdog Timer Value register (WDTV - 0x4000 000C) */ /* Watchdog Feed register (WDFEED - 0x4000 0008) */ #define WDFEED_SEQUENCE WDFEED = 0xAA; WDFEED = 0x55 /* Watchdog Timer Clock Source Selection register (WDCLKSEL - 0x4000 0010) */ #define WDCLKSEL_WDSEL (0x3 << 0) #define WDCLKSEL_WDLOCK (0x1 << 31) /* ADC registers */ #define AD0CR LPC17_REG(0x40034000) /* ADCR A/D Control Register */ #define AD0GDR LPC17_REG(0x40034004) /* ADGDR A/D Global Data Register */ #define AD0INTEN LPC17_REG(0x4003400C) /* ADINTEN A/D Interrupt Enable Register */ #define AD0DR0 LPC17_REG(0x40034010) /* ADDR0 A/D Channel 0 Data Register */ #define AD0DR1 LPC17_REG(0x40034014) /* ADDR1 A/D Channel 1 Data Register */ #define AD0DR2 LPC17_REG(0x40034018) /* ADDR2 A/D Channel 2 Data Register */ #define AD0DR3 LPC17_REG(0x4003401C) /* ADDR3 A/D Channel 3 Data Register */ #define AD0DR4 LPC17_REG(0x40034020) /* ADDR4 A/D Channel 4 Data Register */ #define AD0DR5 LPC17_REG(0x40034024) /* ADDR5 A/D Channel 5 Data Register */ #define AD0DR6 LPC17_REG(0x40034028) /* ADDR6 A/D Channel 6 Data Register */ #define AD0DR7 LPC17_REG(0x4003402C) /* ADDR7 A/D Channel 7 Data Register */ #define AD0STAT LPC17_REG(0x40034030) /* ADSTAT A/D Status Register */ #define AD0TRM LPC17_REG(0x40034034) /* ADTRM ADC trim register */ /* A/D Control Register (AD0CR - 0x4003 4000) */ #define AD0CR_SEL (0xFF << 0) #define AD0CR_CLKDIV (0xFF << 8) #define AD0CR_BURST (0x1 << 16) #define AD0CR_PDN (0x1 << 21) #define AD0CR_START (0x7 << 24) #define AD0CR_EDGE (0x1 << 27) /* A/D Global Data Register (AD0GDR - 0x4003 4004) */ #define AD0GDR_RESULT (0xFFF << 4) #define AD0GDR_CHN (0x7 << 24) #define AD0GDR_OVERRUN (0x1 << 30) #define AD0GDR_DONE (0x1 << 31) /* A/D Interrupt Enable register (AD0INTEN - 0x4003 400C) */ #define AD0INTEN_ADINTEN0 (0x1 << 0) #define AD0INTEN_ADINTEN1 (0x1 << 1) #define AD0INTEN_ADINTEN2 (0x1 << 2) #define AD0INTEN_ADINTEN3 (0x1 << 3) #define AD0INTEN_ADINTEN4 (0x1 << 4) #define AD0INTEN_ADINTEN5 (0x1 << 5) #define AD0INTEN_ADINTEN6 (0x1 << 6) #define AD0INTEN_ADINTEN7 (0x1 << 7) #define AD0INTEN_ADGINTEN (0x1 << 8) /* A/D Data Registers (AD0DR0 to AD0DR7 - 0x4003 4010 to 0x4003 402C) */ #define AD0DRn_RESULT (0xFFF << 4) #define AD0DRn_OVERRUN (0x1 << 30) #define AD0DRn_DONE (0x1 << 31) /* A/D Status register (ADSTAT - 0x4003 4030) */ #define ADSTAT_DONE0 (0x1 << 0) #define ADSTAT_DONE1 (0x1 << 1) #define ADSTAT_DONE2 (0x1 << 2) #define ADSTAT_DONE3 (0x1 << 3) #define ADSTAT_DONE4 (0x1 << 4) #define ADSTAT_DONE5 (0x1 << 5) #define ADSTAT_DONE6 (0x1 << 6) #define ADSTAT_DONE7 (0x1 << 7) #define ADSTAT_OVERRUN0 (0x1 << 8) #define ADSTAT_OVERRUN1 (0x1 << 9) #define ADSTAT_OVERRUN2 (0x1 << 10) #define ADSTAT_OVERRUN3 (0x1 << 11) #define ADSTAT_OVERRUN4 (0x1 << 12) #define ADSTAT_OVERRUN5 (0x1 << 13) #define ADSTAT_OVERRUN6 (0x1 << 14) #define ADSTAT_OVERRUN7 (0x1 << 15) #define ADSTAT_ADINT (0x1 << 16) /* A/D Trim register (ADTRIM - 0x4003 4034) */ #define ADTRIM_ADCOFFS (0xF << 4) #define ADTRIM_TRIM (0xF << 8) /* DAC registers */ #define DACR LPC17_REG(0x4008C000) /* D/A Converter Register */ #define DACCTRL LPC17_REG(0x4008C004) /* DAC Control register */ #define DACCNTVAL LPC17_REG(0x4008C008) /* DAC Counter Value register */ /* D/A Converter Register (DACR - 0x4008 C000) */ #define DACR_VALUE (0x3FF << 6) #define DACR_BIAS (0x1 << 16) /* D/A Converter Control register (DACCTRL - 0x4008 C004) */ #define DACCTRL_INT_DMA_REQ (0x1 << 0) #define DACCTRL_DBLBUF_ENA (0x1 << 1) #define DACCTRL_CNT_ENA (0x1 << 2) #define DACCTRL_DMA_ENA (0x1 << 3) /* skipped D/A Converter Counter Value register (DACCNTVAL - 0x4008 C008) */ /* GPDMA registers */ /* General registers */ #define DMACIntStat LPC17_REG(0x50004000) /* DMA Interrupt Status Register */ #define DMACIntTCStat LPC17_REG(0x50004004) /* DMA Interrupt Terminal Count Request Status Register */ #define DMACIntTCClear LPC17_REG(0x50004008) /* DMA Interrupt Terminal Count Request Clear Register */ #define DMACIntErrStat LPC17_REG(0x5000400C) /* DMA Interrupt Error Status Register */ #define DMACIntErrClr LPC17_REG(0x50004010) /* DMA Interrupt Error Clear Register */ #define DMACRawIntTCStat LPC17_REG(0x50004014) /* DMA Raw Interrupt Terminal Count Status Register */ #define DMACRawIntErrStat LPC17_REG(0x50004018) /* DMA Raw Error Interrupt Status Register */ #define DMACEnbldChns LPC17_REG(0x5000401C) /* DMA Enabled Channel Register */ #define DMACSoftBReq LPC17_REG(0x50004020) /* DMA Software Burst Request Register */ #define DMACSoftSReq LPC17_REG(0x50004024) /* DMA Software Single Request Register */ #define DMACSoftLBReq LPC17_REG(0x50004028) /* DMA Software Last Burst Request Register */ #define DMACSoftLSReq LPC17_REG(0x5000402C) /* DMA Software Last Single Request Register */ #define DMACConfig LPC17_REG(0x50004030) /* DMA Configuration Register */ #define DMACSync LPC17_REG(0x50004034) /* DMA Synchronization Register */ #define DMAREQSEL LPC17_REG(0x400FC1C4) /* Selects between UART and timer DMA requests */ /* Channel 0 registers */ #define DMACC0SrcAddr LPC17_REG(0x50004100) /* DMA Channel 0 Source Address Register */ #define DMACC0DestAddr LPC17_REG(0x50004104) /* DMA Channel 0 Destination Address Register */ #define DMACC0LLI LPC17_REG(0x50004108) /* DMA Channel 0 Linked List Item Register */ #define DMACC0Control LPC17_REG(0x5000410C) /* DMA Channel 0 Control Register */ #define DMACC0Config LPC17_REG(0x50004110) /* DMA Channel 0 Configuration Register */ /* Channel 1 registers */ #define DMACC1SrcAddr LPC17_REG(0x50004120) /* DMA Channel 1 Source Address Register */ #define DMACC1DestAddr LPC17_REG(0x50004124) /* DMA Channel 1 Destination Address Register */ #define DMACC1LLI LPC17_REG(0x50004128) /* DMA Channel 1 Linked List Item Register */ #define DMACC1Control LPC17_REG(0x5000412C) /* DMA Channel 1 Control Register */ #define DMACC1Config LPC17_REG(0x50004130) /* DMA Channel 1 Configuration Register */ /* Channel 2 registers */ #define DMACC2SrcAddr LPC17_REG(0x50004140) /* DMA Channel 2 Source Address Register */ #define DMACC2DestAddr LPC17_REG(0x50004144) /* DMA Channel 2 Destination Address Register */ #define DMACC2LLI LPC17_REG(0x50004148) /* DMA Channel 2 Linked List Item Register */ #define DMACC2Control LPC17_REG(0x5000414C) /* DMA Channel 2 Control Register */ #define DMACC2Config LPC17_REG(0x50004150) /* DMA Channel 2 Configuration Register */ /* Channel 3 registers */ #define DMACC3SrcAddr LPC17_REG(0x50004160) /* DMA Channel 3 Source Address Register */ #define DMACC3DestAddr LPC17_REG(0x50004164) /* DMA Channel 3 Destination Address Register */ #define DMACC3LLI LPC17_REG(0x50004168) /* DMA Channel 3 Linked List Item Register */ #define DMACC3Control LPC17_REG(0x5000416C) /* DMA Channel 3 Control Register */ #define DMACC3Config LPC17_REG(0x50004170) /* DMA Channel 3 Configuration Register */ /* Channel 4 registers */ #define DMACC4SrcAddr LPC17_REG(0x50004180) /* DMA Channel 4 Source Address Register */ #define DMACC4DestAddr LPC17_REG(0x50004184) /* DMA Channel 4 Destination Address Register */ #define DMACC4LLI LPC17_REG(0x50004188) /* DMA Channel 4 Linked List Item Register */ #define DMACC4Control LPC17_REG(0x5000418C) /* DMA Channel 4 Control Register */ #define DMACC4Config LPC17_REG(0x50004190) /* DMA Channel 4 Configuration Register */ /* Channel 5 registers */ #define DMACC5SrcAddr LPC17_REG(0x500041A0) /* DMA Channel 5 Source Address Register */ #define DMACC5DestAddr LPC17_REG(0x500041A4) /* DMA Channel 5 Destination Address Register */ #define DMACC5LLI LPC17_REG(0x500041A8) /* DMA Channel 5 Linked List Item Register */ #define DMACC5Control LPC17_REG(0x500041AC) /* DMA Channel 5 Control Register */ #define DMACC5Config LPC17_REG(0x500041B0) /* DMA Channel 5 Configuration Register */ /* Channel 6 registers */ #define DMACC6SrcAddr LPC17_REG(0x500041C0) /* DMA Channel 6 Source Address Register */ #define DMACC6DestAddr LPC17_REG(0x500041C4) /* DMA Channel 6 Destination Address Register */ #define DMACC6LLI LPC17_REG(0x500041C8) /* DMA Channel 6 Linked List Item Register */ #define DMACC6Control LPC17_REG(0x500041CC) /* DMA Channel 6 Control Register */ #define DMACC6Config LPC17_REG(0x500041D0) /* DMA Channel 6 Configuration Register */ /* Channel 7 registers */ #define DMACC7SrcAddr LPC17_REG(0x500041E0) /* DMA Channel 7 Source Address Register */ #define DMACC7DestAddr LPC17_REG(0x500041E4) /* DMA Channel 7 Destination Address Register */ #define DMACC7LLI LPC17_REG(0x500041E8) /* DMA Channel 7 Linked List Item Register */ #define DMACC7Control LPC17_REG(0x500041EC) /* DMA Channel 7 Control Register */ #define DMACC7Config LPC17_REG(0x500041F0) /* DMA Channel 7 Configuration Register */ /* * skipped: * * DMA Interrupt Status register (DMACIntStat - 0x5000 4000) * DMA Interrupt Terminal Count Request Status register (DMACIntTCStat - 0x5000 4004) * DMA Interrupt Terminal Count Request Clear register (DMACIntTCClear - 0x5000 4008) * DMA Interrupt Error Status register (DMACIntErrStat - 0x5000 400C) * DMA Interrupt Error Clear register (DMACIntErrClr - 0x5000 4010) * DMA Raw Interrupt Terminal Count Status register (DMACRawIntTCStat - 0x5000 4014) * DMA Raw Interrupt Terminal Count Status register (DMACRawIntTCStat - 0x5000 4014) * DMA Enabled Channel register (DMACEnbldChns - 0x5000 401C) * DMA Software Burst Request register (DMACSoftBReq - 0x5000 4020) * DMA Software Single Request register (DMACSoftSReq - 0x5000 4024) * DMA Software Last Burst Request register (DMACSoftLBReq - 0x5000 4028) * DMA Software Last Single Request register (DMACSoftLSReq - 0x5000 402C) */ /* DMA Configuration register (DMACConfig - 0x5000 4030) */ #define DMACConfig_E (0x1 << 0) #define DMACConfig_M (0x1 << 1) /* skipped DMA Synchronization register (DMACSync - 0x5000 4034) */ /* DMA Request Select register (DMAReqSel - 0x400F C1C4) */ #define DMAReqSel_DMASEL08 (0x1 << 0) #define DMAReqSel_DMASEL09 (0x1 << 1) #define DMAReqSel_DMASEL10 (0x1 << 2) #define DMAReqSel_DMASEL11 (0x1 << 3) #define DMAReqSel_DMASEL12 (0x1 << 4) #define DMAReqSel_DMASEL13 (0x1 << 5) #define DMAReqSel_DMASEL14 (0x1 << 6) #define DMAReqSel_DMASEL15 (0x1 << 7) /* * skipped: * * DMA Channel Source Address registers (DMACCxSrcAddr - 0x5000 41x0) * DMA Channel Destination Address registers (DMACCxDestAddr - 0x5000 41x4) * DMA Channel Linked List Item registers (DMACCxLLI - 0x5000 41x8) */ /* DMA channel control registers (DMACCxControl - 0x5000 41xC) */ #define DMACCxControl_TransferSize (0xFFF << 0) #define DMACCxControl_SBSize (0x7 << 12) #define DMACCxControl_DBSize (0x7 << 15) #define DMACCxControl_SWidth (0x7 << 18) #define DMACCxControl_DWidth (0x7 << 21) #define DMACCxControl_SI (0x1 << 26) #define DMACCxControl_DI (0x1 << 27) #define DMACCxControl_Prot1 (0x1 << 28) #define DMACCxControl_Prot2 (0x1 << 29) #define DMACCxControl_Prot3 (0x1 << 30) #define DMACCxControl_I (0x1 << 31) /* DMA Channel Configuration registers (DMACCxConfig - 0x5000 41x0) */ #define DMACCxConfig_E (0x1 << 0) #define DMACCxConfig_SrcPeripheral (0x1F << 1) #define DMACCxConfig_DestPeripheral (0x1F << 6) #define DMACCxConfig_TransferType (0x7 << 11) #define DMACCxConfig_IE (0x1 << 14) #define DMACCxConfig_ITC (0x1 << 15) #define DMACCxConfig_L (0x1 << 16) #define DMACCxConfig_A (0x1 << 17) #define DMACCxConfig_H (0x1 << 18) /* FMC registers */ #define FMSSTART LPC17_REG(0x40084020) /* Signature start address register */ #define FMSSTOP LPC17_REG(0x40084024) /* Signature stop-address register */ #define FMSW0 LPC17_REG(0x4008402C) /* 128-bit signature Word 0 */ #define FMSW1 LPC17_REG(0x40084030) /* 128-bit signature Word 1 */ #define FMSW2 LPC17_REG(0x40084034) /* 128-bit signature Word 2 */ #define FMSW3 LPC17_REG(0x40084038) /* 128-bit signature Word 3 */ #define FMSTAT LPC17_REG(0x40084FE0) /* Signature generation status register */ #define FMSTATCLR LPC17_REG(0x40084FE8) /* Signature generation status clear register */ /* skipped Flash Module Signature Start register (FMSSTART - 0x4008 4020) */ /* Flash Module Signature Stop register (FMSSTOP - 0x4008 4024) */ #define FMSSTOP_STOP (0x1FFFF << 0) #define FMSSTOP_SIG_START (0x1 << 17) /* * skipped: * * FMSW0 register bit description (FMSW0, address: 0x4008 402C) * FMSW1 register bit description (FMSW1, address: 0x4008 4030) * FMSW2 register bit description (FMSW2, address: 0x4008 4034) * FMSW3 register bit description (FMSW3, address: 0x4008 4038) */ /* Flash module Status register (FMSTAT - 0x4008 4FE0) */ #define FMSTAT_SIG_DONE (0x1 << 2) /* Flash Module Status Clear register (FMSTATCLR - 0x0x4008 4FE8) */ #define FMSTATCLR_SIG_DONE_CLR (0x1 << 2) #endif /* __LPC17_H */