CERN FMC ADC 100M 14b 4cha solderpad

cern-fmc-adc-100m-14b-4cha / hdl / spec / ip_cores / adc_serdes.xco
2.0 KB · raw
##############################################################
#
# Xilinx Core Generator version 12.2
# Date: Tue Mar  1 09:29:12 2011
#
##############################################################
#
#  This file contains the customisation parameters for a
#  Xilinx CORE Generator IP GUI. It is strongly recommended
#  that you do not manually alter this file as it may cause
#  unexpected and unsupported behavior.
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = VHDL
SET device = xc6slx45t
SET devicefamily = spartan6
SET flowvendor = Foundation_ISE
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = fgg484
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -3
SET verilogsim = false
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT SelectIO_Interface_Wizard family Xilinx,_Inc. 1.4
# END Select
# BEGIN Parameters
CSET active_edge=RISING
CSET bus_dir=INPUTS
CSET bus_in_delay=NONE
CSET bus_in_tap=0
CSET bus_io_std=LVDS_25
CSET bus_out_delay=NONE
CSET bus_out_tap=0
CSET bus_sig_type=DIFF
CSET bus_tap_reset=NOT_APP
CSET bus_tap_wrap=NOT_APP
CSET clk_buf=BUFPLL
CSET clk_delay=NONE
CSET clk_io_std=LVCMOS25
CSET clk_sig_type=SINGLE
CSET clk_tap=0
CSET component_name=adc_serdes
CSET ddr_alignment=C0
CSET enable_bitslip=true
CSET enable_train=false
CSET interface_type=RETIMED
CSET notes=None
CSET serialization_factor=8
CSET system_data_width=9
CSET train_constant=0
CSET use_phase_detector=false
CSET use_serialization=true
CSET v6_active_edge=SDR
CSET v6_bus_in_delay=NONE
CSET v6_bus_in_tap=0
CSET v6_bus_out_delay=NONE
CSET v6_bus_out_tap=0
CSET v6_clk_buf=BUFIO
CSET v6_clk_io_std=LVCMOS18
CSET v6_clk_sig_type=DIFF
CSET v6_ddr_alignment=SAME_EDGE_PIPELINED
CSET v6_interface_type=NETWORKING
CSET v6_oddr_alignment=SAME_EDGE
# END Parameters
GENERATE
# CRC: 1002624d
SolderPad

CERN FMC ADC 100M 14b 4cha solderpad
