emonGLCD openenergymon

emonglcd / .solderpad / bom.json

4.5 KB · raw

{
	"items": [
		{
			"designator": "5VUSB",
			"value": "",
			"description": "USB Connectors"
		},
		{
			"designator": "16MHZ",
			"value": "16Mhz",
			"description": "CRYSTAL"
		},
		{
			"designator": "ANT",
			"value": "",
			"description": "THROUGH-HOLE PAD"
		},
		{
			"designator": "BACKLIGHT",
			"value": "",
			"description": "Header 2"
		},
		{
			"designator": "C1",
			"value": "0.1µ",
			"description": "CAPACITOR, European symbol"
		},
		{
			"designator": "C2",
			"value": "0.1µ",
			"description": "CAPACITOR, European symbol"
		},
		{
			"designator": "C3",
			"value": "0.1µ",
			"description": "CAPACITOR, European symbol"
		},
		{
			"designator": "C4",
			"value": "0.1µ",
			"description": "CAPACITOR, European symbol"
		},
		{
			"designator": "C5",
			"value": "10µ",
			"description": "POLARIZED CAPACITOR, European symbol"
		},
		{
			"designator": "C6",
			"value": "22pF",
			"description": "CAPACITOR"
		},
		{
			"designator": "C7",
			"value": "22pF",
			"description": "CAPACITOR"
		},
		{
			"designator": "C8",
			"value": "100n",
			"description": "CAPACITOR"
		},
		{
			"designator": "C9",
			"value": "100n",
			"description": "CAPACITOR"
		},
		{
			"designator": "C10",
			"value": "100n",
			"description": "CAPACITOR"
		},
		{
			"designator": "C11",
			"value": "100n",
			"description": "CAPACITOR"
		},
		{
			"designator": "C12",
			"value": "100n",
			"description": "CAPACITOR"
		},
		{
			"designator": "C13",
			"value": "10u",
			"description": "POLARIZED CAPACITOR, European symbol"
		},
		{
			"designator": "C14",
			"value": "10u",
			"description": "POLARIZED CAPACITOR, European symbol"
		},
		{
			"designator": "C15",
			"value": "10u",
			"description": "POLARIZED CAPACITOR, European symbol"
		},
		{
			"designator": "C16",
			"value": "10u",
			"description": "POLARIZED CAPACITOR, European symbol"
		},
		{
			"designator": "FTDI",
			"value": "FTDI",
			"description": "PIN HEADER"
		},
		{
			"designator": "IC1",
			"value": "ATMEGA 328",
			"description": ""
		},
		{
			"designator": "IC2",
			"value": "MCP1702-33",
			"description": "200 mA, Low Power Low Dropout Voltage Regulator"
		},
		{
			"designator": "JP1",
			"value": "BATT",
			"description": "Header 2"
		},
		{
			"designator": "JP2",
			"value": "",
			"description": "Header 3"
		},
		{
			"designator": "JP3",
			"value": "",
			"description": "Header 3"
		},
		{
			"designator": "P3",
			"value": "JEEPORT",
			"description": "PIN HEADER"
		},
		{
			"designator": "PWR/SER/I2C",
			"value": "",
			"description": "Header 8"
		},
		{
			"designator": "R1",
			"value": "10k",
			"description": "RESISTOR, European symbol"
		},
		{
			"designator": "R2",
			"value": "100",
			"description": "RESISTOR, European symbol"
		},
		{
			"designator": "R3",
			"value": "100R",
			"description": "RESISTOR, European symbol"
		},
		{
			"designator": "R4",
			"value": "LDR",
			"description": "Photocell Also known as a CdS photoresistor. This is a low cost way to detect light levels. Resistance decreases with more incoming light. SparkFun SKU: SEN-09088"
		},
		{
			"designator": "R5",
			"value": "10k",
			"description": "RESISTOR, European symbol"
		},
		{
			"designator": "R6",
			"value": "10k",
			"description": "RESISTOR, European symbol"
		},
		{
			"designator": "R9",
			"value": "4.7K",
			"description": "RESISTOR, European symbol"
		},
		{
			"designator": "R10",
			"value": "100",
			"description": "RESISTOR, European symbol"
		},
		{
			"designator": "S1",
			"value": "",
			"description": "OMRON SWITCH"
		},
		{
			"designator": "S2",
			"value": "",
			"description": "OMRON SWITCH"
		},
		{
			"designator": "S3",
			"value": "",
			"description": "OMRON SWITCH"
		},
		{
			"designator": "SV7",
			"value": "SPI/ISP",
			"description": "PIN HEADER"
		},
		{
			"designator": "TEMP",
			"value": "DS18B20",
			"description": "Transistor NPN"
		},
		{
			"designator": "TRI-LED1",
			"value": "",
			"description": "DUO LED"
		},
		{
			"designator": "TRI-LED2",
			"value": "",
			"description": "DUO LED"
		},
		{
			"designator": "U$1",
			"value": "RFM12B",
			"description": ""
		},
		{
			"designator": "U$2",
			"value": "M20",
			"description": "This is just like the LOCK variant in that the holes are staggared by 5 mil, but except for the last two holes.  They are not altered from the \"standard\" footprint layout.  This is used for a special purpose on the layout of our Graphic LCD Backpack.  Make sure you want to use this device before selecting it for you project!"
		}
	]
}